Konica Minolta bizhub C451 User Manual

Sending a user box document5
C4515-9
3Touch a destination button to select the address.
– The corresponding address appears as the name of the registered 
destination when an index button is touched.
– Multiple destinations can be specified at the same time.
– Additional destinations can be added by directly typing in the ad-
dress.
The button appears selected, and the destination appears under 
“Broadcast Destinations”.
!
Detail 
The desired destination can be searched for. For details, refer to...

Sending a user box document5
C4515-10
2Touch [Group].
The registered group destinations appear.
3Touch the button for the group destination.
A list of destinations registered in the group appears.
Downloaded From ManualsPrinter.com Manuals 

Sending a user box document5
C4515-11
4Select the destination where the data is to be sent, and then touch 
[OK].
– To select all destinations, touch [Select All].
– To deselect all destinations, touch [Reset].
– Additional destinations can be added by directly typing in the ad-
dress.
The button appears selected, and the destination appears under 
“Broadcast Destinations”.
Searching for a destination
A search for the desired destination can be performed using any of the fol-
lowing methods. The...

Sending a user box document5
C4515-12
!
Detail 
In order to perform an Address search, settings for the Address server 
must be specified from Administrator mode. For details, refer to “Ena-
bling LDAP” in the User’s Guide [Network Scanner Operations].
For details on performing an Address search, refer to “Selecting a desti-
nation with an Address search” on page 5-21.
1From the Use Document screen, select the document to be sent, and 
then touch [Send].
2Touch [Address Book], and then touch [Search]....

Sending a user box document5
C4515-13
5Type in the text to be searched for, and then touch [OK].
The Detailed Search screen appears again, and the search results are 
displayed.
6Select the desired destination, and then touch [OK].
Directly specifying an e-mail destination
2
Note 
If “Manual Destination Input” (displayed by touching [Security Settings] 
on the Administrator Settings screen, then [Security Details]) is set to 
“Restrict”, [Direct Input] does not appear.
1From the Use Document screen,...

Sending a user box document5
C4515-14
2Touch [E-Mail] on the Direct Input tab.
A screen appears, allowing you to type in the address of the destina-
tion.
3Type in the address of the destination, and then touch [OK].
– To specify additional destinations, repeat steps 2 and 3.
The entered addresses appear under “Broadcast Destinations”.
2
Note 
Frequently entered user names and domain names can be registered to 
be recalled and used again. Prefixes and suffixes must first be registered 
in Administrator...

Sending a user box document5
C4515-15 Directly specifying an SMB destination
Settings can be specified for the following.
2
Note 
If “Manual Destination Input” (displayed by touching [Security Settings] 
on the Administrator Settings screen, then [Security Details]) is set to 
“Restrict”, [Direct Input] does not appear.
1From the Use Document screen, select the document to be sent, and 
then touch [Send].
2Touch [PC (SMB)] on the Direct Input tab.
A screen appears, allowing you to type in the host name...

Sending a user box document5
C4515-16
3Enter the information for the destination, and then touch [OK].
– To check the contents of the shared folders, touch [Reference].
– To specify an additional address, touch [Next Destination], and 
then enter the information.
The entered addresses appear under “Broadcast Destinations”.
2
Reminder 
If more than the following number of computers or workgroups exist on 
the network (subnet) that this machine belongs to, browsing over the net-
work may not be performed...

Sending a user box document5
C4515-17 Detailed Settings
2
Note 
If “Manual Destination Input” (displayed by touching [Security Settings] 
on the Administrator Settings screen, then [Security Details]) is set to 
“Restrict”, [Direct Input] does not appear.
1From the Use Document screen, select the document to be sent, and 
then touch [Send].
2Touch [FTP] on the Direct Input tab.
A screen appears, allowing you to type in the host name for the desti-
nation and the file path.
ParameterDescription
Port...

Sending a user box document5
C4515-18
3Type in the destination information.
– To specify an additional address, touch [Next Destination], and 
then enter the information.
The entered addresses appear under “Broadcast Destinations”.
4To specify advanced settings, touch [Detailed Settings], and then 
specify the settings.
5Touch [OK], and then touch [OK] in the next screen that appears.
Downloaded From ManualsPrinter.com Manuals