Konica Minolta bizhub 40P User Manual

Configuration Menu Overview 71
HOLD 
JOB 
TIME
OUTSettingsDISABLE/1 hour/4 hours/1 day/
1 week
Specify the length of time until print jobs saved on the hard disk 
are deleted. If 
DISABLE is selected, print jobs are not deleted 
at a specific time.
ENERGY 
SAVER 
TIMESettings5 minutes/6 minutes/7 minutes/8 
minutes/9 minutes/10 minutes/11 
minutes/12 minutes/13 minutes/14 
minutes/15 minutes/30 minutes/1 
hour
Specify the length of time until the machine enters Energy 
Saver mode.
MENU 
TIME...

Configuration Menu Overview 72
CLOCK DATE
(xx.xx.
xx)
Specify the date for the printer’s internal clock.
The date for Asia and China is set in the order year, 
month, then day (
YY.MM.DD).
The date for the Americas is set in the order month, 
day, then year (
MM.DD.YY).
The date for Europe is set in the order day, month, 
then year (
DD.MM.YY).
TIMESpecify the time for the printer’s internal clock.
TIME 
ZONESettings-12:00-00:00-+13:00
Specify the time zone.
HDD 
FORMATUSER 
AREA 
ONLYInitialize the user...

Configuration Menu Overview 73
ENABLE 
WARNINGPAPER 
EMPTYTRAY1SettingsON/OFF
Select whether or not a warning appears 
when Tray 1 runs out of media.
TRAY2SettingsON/OFF
Select whether or not a warning appears 
when Tray 2 runs out of media.
TRAY3SettingsON/OFF
Select whether or not a warning appears 
when Tray 3 runs out of media.
TRAY4SettingsON/OFF
Select whether or not a warning appears 
when Tray 4 runs out of media.
PAPER 
LOWTRAY2SettingsON/OFF
Select whether or not to display a warning 
when Tray...

Configuration Menu Overview 74
MAINTENANCE MENU
With this menu, maintenance on this printer can be performed.
In order to use this menu, the administrator password must be entered.
ALIGNMENTTOP 
ADJUSTMENTTRAY1-4
THICK
MAINTENANCE MENU
PRINT MENUEVENT LOG
HALFTONE 64
HALFTONE 128
HALFTONE 256
GRADATION
DUPLEX
LEFT 
ADJUSTMENTLEFT ADJ 
TRAY 1-4
LEFT ADJ 
DUPLEX
LD POWER
VIDEO TIME 
LAG
SUPPLIESREPLACEFUSER UNIT
QUICK SET-
TING*UPDATE SET-
TING
BACKUP SET-
TING
Downloaded From ManualsPrinter.com Manuals 

Configuration Menu Overview 75
* This menu item appears only if a USB memory device is connected 
to the printer.
All factory default values are shown in bold.
PRINT 
MENUEVENT 
LOGSettingsPRINT/CANCEL
Prints the event log.
HALF-
TONE 
64SettingsPRINT/CANCEL
Print halftones at 64 gradations.
HALF-
TONE 
128SettingsPRINT/CANCEL
Print halftones at 128 gradations.
HALF-
TONE 
256SettingsPRINT/CANCEL
Print halftones at 256 gradations.
GRADA-
TIONSettingsPRINT/CANCEL
Prints the gradation.
ALIGN-
MENTTOP...

Configuration Menu Overview 76
LEFT 
ADJUST
MENTLEFT 
ADJ 
TRAY1Settings-8-0-7
When printing on media in Tray 1, specify 
the size of the left margin.
LEFT 
ADJ 
TRAY2Settings-8-0-7
When printing on media in Tray 2, specify 
the size of the left margin.
LEFT 
ADJ 
TRAY3Settings-8-0-7
When printing on media in Tray 3, specify 
the size of the left margin.
LEFT 
ADJ 
TRAY4Settings-8-0-7
When printing on media in Tray 4, specify 
the size of the left margin.
LEFT 
ADJ 
DUPLEXSettings-8-0-7
When printing on...

Configuration Menu Overview 77 SERVICE MENU
With this menu, the service representative can adjust the printer and perform 
maintenance operations. This menu cannot be used by the user.
Downloaded From ManualsPrinter.com Manuals 

Configuration Menu Overview 78
Downloaded From ManualsPrinter.com Manuals 

Memory Direct
Downloaded From ManualsPrinter.com Manuals 

Memory Direct 80
Memory Direct
PDF, XPS, JPEG and TIFF files saved on USB memory devices can be 
printed by plugging the USB memory device into the printer.
Memory direct can be used only if an optional hard disk kit or a Com-
pactFlash card is installed.
In order to perform collated printing with memory direct, an optional 
hard disk kit or a CompactFlash card of 1 GB or more must be 
installed.
For details on specifying settings with the control panel, refer to “MEM-
ORY DIRECT” on page 52.
Printing...