Konica Minolta bizhub 40P User Manual

Configuration Menu Overview 61
IPv6 ENABLESettingsYES/NO
If YES is selected, IPv6 is 
enabled.
If 
NO is selected, IPv6 is dis-
abled.
AUTO 
SET-
TINGSettingsYES/NO
If YES is selected, IPv6 
address is automatically 
obtained.
If 
NO is selected, IPv6 auto 
configuration is disabled.
LINK 
LOCALDisplays the link-local address 
of IPv6.
GLOBAL 
ADDRESSDisplays the global address of 
IPv6.
GATE-
WAY 
ADDRESSDisplays the gateway address 
of IPv6.
NETWARE ENABLESettingsYES/NO
If YES is selected, NetWare is...

Configuration Menu Overview 62
MEMORY 
DIRECTSettingsENABLE/DISABLE
Select whether to enable or disable memory direct printing.
If 
ENABLE is selected, memory direct printing is enabled.
If 
DISABLE is selected, memory direct printing is disabled.
Downloaded From ManualsPrinter.com Manuals 

Configuration Menu Overview 63 SYS DEFAULT MENU
With this menu, settings can be specified to adjust the operation of the printer, 
such as the display language of the message window and the time until the 
machine enters Energy Saver mode.
LANGUAGE
EMULATIONDEF.
EMULATION
POSTSCRIPTWAIT 
TIMEOUT
PS ERROR 
PAGE
PS PROTOCOL
PCLCR/LF 
MAPPING
LINES PER 
PAGE
FONT SOURCEFONT NUMBER
PITCH SIZE
(POINT SIZE)
SYMBOL SET
PAPERDEFAULT 
PAPER
UNIT OF 
MEASURE
SYS DEFAULT MENU
PAPER SIZE
CUSTOM SIZE
PAPER TYPE
DO...

Configuration Menu Overview 64
LCD 
CONTRAST
SECURITYCHANGE 
PASSWORD
LOCK PANEL
CLOCKDATE 
(xx.xx.xx)
TIME
HDD FORMAT*USER AREA 
ONLY
ALL
RESTORE 
DEFAULTSRESTORE 
NETWORK
RESTORE 
PRINTER
RESTORE ALL
ENERGY 
SAVER TIME
MENU 
TIMEOUT
TIME ZONE
HOLD JOB 
TIMEOUT*
CARD FORMAT**USER AREA 
ONLY
ALL
Downloaded From ManualsPrinter.com Manuals 

Configuration Menu Overview 65
* This menu item appears only if an optional hard disk kit is installed.
** This menu item appears only if an optional CompactFlash card is 
installed.
*** These menu items appear only if the optional lower feeder unit is 
installed.
**** This menu item appears only if an optional hard disk kit or a Com-
pactFlash card is installed.
ENABLE 
WARNINGPAPER EMPTYTRAY1
TRAY2
TRAY3***
TRAY4***
PAPER LOW
TONER LOW
TRAY2
TRAY3***
TRAY4***
Downloaded From ManualsPrinter.com Manuals 

Configuration Menu Overview 66
All factory default values are shown in bold.
LAN-
GUAGESettingsENGLISH/FRENCH/GERMAN/SPANISH/
ITALIAN/PORTUGUESE/CZECH/JAPANESE/
KOREAN/SIMPLIFIED CHINESE/
TRADITIONAL CHINESE/DUTCH/RUSSIAN/ 
POLISH
The display language of the message window can be changed 
to the selected language.
The language selections appear in the message window in the 
corresponding language. For example, 
GERMAN appears as 
DEUTSCH.
EMULA-
TIONDEF. 
EMULA-
TIONSettingsAUTO/POSTSCRIPT/PCL
Specify...

Configuration Menu Overview 67
PCL CR/LF 
MAP-
PINGSettingsCR=CR LF=LF/CR=CRLF 
LF=LF/CR=CR 
LF=LFCR/CR=CRLF 
LF=LFCR
Select the definitions of the CR/LF codes 
in the PCL language.
LINES 
PER 
PAGESettings5-60-128
Specify the number of lines per page in the 
PCL language.
FONT 
SOURCEFONT 
NUMBERSettings0-102
Specify the default font in the 
PCL language.
The font numbers that appear 
correspond to the PCL font list. 
For details on printing the font 
list, refer to “PRINT MENU” on 
page 34.
PITCH...

Configuration Menu Overview 68
XPS DIGI-
TAL 
SIGNA-
TURESettingsENABLE/DISABLE
If ENABLE is selected, DIGITAL SIG-
NATURE
 is enabled.
If 
DISABLE is selected, DIGITAL 
SIGNATURE
 is disabled.
XPS 
ERROR 
PAGESettingsON/OFF
If ON is selected, an XPS error page is 
printed when an XPS error occurs.
If 
OFF is selected, no XPS error page is 
printed when an XPS error occurs.
PAPER DEFAULT 
PAPERPAPER 
SIZESettingsLETTER/LEGAL/EXECU-
TIVE/A4/A5/A6/
B5(JIS)/B6(JIS)/GOVT 
LETTER/STATEMENT/
FOLIO/SP FOLIO/UK...

Configuration Menu Overview 69
CUSTOM 
SIZESpecify the media size when PAPER 
SIZE
 is set to CUSTOM.
The setting units can be switched between 
millimeters and inches with the 
SYS 
DEFAULT MENU/PAPER/UNIT OF 
MEASURE
 setting.
Setting range for 
WIDTH
„For MILLIMETERS: 76 to 216 mm
(default)
–North America: 216 mm
–All other regions: 210 mm
„For INCHES: 3.00 to 8.50 inches
(default)
–North America: 8.50 inches
–All other regions: 8.27 inches
Setting range for LENGTH
„For MILLIMETERS: 127 to 356 mm...

Configuration Menu Overview 70
PAPER 
TYPESettingsPLAIN PAPER/
RECYCLED/THICK 1/
THICK 2/THICK 3/
LABEL/TRANSPARENCY/
ENVELOPE/POSTCARD/
THIN PAPER
Select the type of media that is normally 
used.
PAPER 
SIZE 
ERRORSettingsENABLE/DISABLE
If ENABLE is selected, a paper size error is detected.
If 
DISABLE is selected, no paper size error is 
detected.
UNIT 
OF 
MEA-
SURESettingsINCHES/MILLIMETERS
The units for specifying the size of custom media can 
be switched between inches and millimeters.
The default...