Konica Minolta bizhub 40P User Manual

Configuration Menu Overview 51
ECONOMY 
PRINTSettingsON/OFF
Select whether to print graphics with a reduced density by 
reducing the amount of toner that is used.
If 
ON is selected, the amount of toner used is reduced when 
printing.
If 
OFF is selected, the amount of toner used is not reduced 
when printing.
Downloaded From ManualsPrinter.com Manuals 

Configuration Menu Overview 52
MEMORY DIRECT
This menu item appears when an optional hard disk kit or a CompactFlash 
card is installed, and 
INTERFACE MENU/MEMORY DIRECT is set to 
ENABLE.
In addition, this menu item does not appear if public user access has not 
been permitted through authentication settings. For details on the authentica-
tion settings, refer to the Reference Guide on the Utilities and Documentation 
CD-ROM.
With this menu, settings for “memory direct” function can be specified.
For...

Configuration Menu Overview 53
LETTER/
A4SettingsLETTER/LEGAL/EXECUTIVE/A4/
A5/A6/B5(JIS)/B6(JIS)/GOVT 
LETTER/STATEMENT/FOLIO/SP 
FOLIO/UK QUARTO/FOOLSCAP/
GOVT LEGAL/16K/KAI 16/KAI 
32/ENV C5/ENV C6/ENV DL/ENV 
MONARCH/ENV CHOU#3/ENV 
CHOU#4/B5(ISO)/ENV #10/ENV 
YOU#4/JPOST/JPOST-D/CUSTOM
Change the size of the paper.
The value selected for SYS DEFAULT 
MENU
/DEFAULT PAPER is displayed as the 
default for this setting.
This menu item does not appear if the 
selected file type is a PDF file or an XPS...

Configuration Menu Overview 54
COLLATESettingsON/OFF
Select whether to collate the copies.
If 
ON is selected, collated printing is performed.
If 
OFF is selected, collated printing is not performed.
This menu item appears only if an optional 
hard disk kit or a CompactFlash card of 1GB 
or more is installed.
MAIN 
TRAYSettingsSUB TRAY/MAIN TRAY/OFFSET
Select the output tray and finishing settings.
When 
SUB TRAY is selected, the paper is fed to 
the sub output tray.
When 
MAIN TRAY is selected, the...

Configuration Menu Overview 55 INTERFACE MENU
With this menu, interface settings can be specified.
Restart the printer after changing settings in the ETHERNET menu.
JOB TIMEOUT
INTERFACE MENU
ETHERNETTCP/IPENABLE 
IP ADDRESS*
SUBNET MASK*
DEFAULT 
GATEWAY*
DHCP*
HTTP*ENABLE
FTP*ENABLE
TELNET*
BONJOUR*ENABLE
DYNAMIC DNS*ENABLE
IPP*ENABLE
RAW PORT*ENABLE
BIDIREC-
TIONAL
MEMORY 
DIRECT**
BOOTP*
ARP/PING*
Downloaded From ManualsPrinter.com Manuals 

Configuration Menu Overview 56
* These menu items appear when INTERFACE MENU/ETHERNET/
TCP/IP/ENABLE
 is set to YES.
** This menu item appears only if an optional hard disk kit or a Com-
pactFlash card is installed.
SLP*ENABLE
SMTP*ENABLE
SNMP*ENABLE
WSD PRINT*ENABLE
IPSEC*ENABLE
IP ADDRESS 
FILTER*ACCESS PER-
MISSION
ACCESS 
REFUSE
IPv6*ENABLE
AUTO SETTING
LINK LOCAL
GLOBAL 
ADDRESS
GATEWAY 
ADDRESS
NETWAREENABLE
APPLETALKENABLE
SPEED/DUPLEX
IEEE802.1XENABLE
Downloaded From ManualsPrinter.com Manuals 

Configuration Menu Overview 57
All factory default values are shown in bold.
JOB 
TIME-
OUTSettings5 seconds-15 seconds-300 seconds
Specify the timeout interval for a print job being received.
ETHER-
NETTCP/IP ENABLESettingsYES/NO
If YES is selected, TCP/IP is enabled.
If 
NO is selected, TCP/IP is disabled.
IP 
ADDRESSSetting000.000.000.000
Set the IP address for this printer on the 
network.
Use the  ,  ,  , and   keys to 
specify the value.
If the IP address is manually specified, 
DHCP/BOOTP is...

Configuration Menu Overview 58
BOOTPSettingsON/OFF
Select whether or not the IP address is 
automatically acquired.
If 
ON is selected, the IP address is auto-
matically acquired.
If 
OFF is selected, the IP address is not 
automatically acquired.
ARP/
PINGSettingsON/OFF
Select whether or not the IP address is 
automatically acquired.
If 
ON is selected, the IP address is auto-
matically acquired.
If 
OFF is selected, the IP address is not 
automatically acquired.
HTTP ENABLESettingsYES/NO
If YES is...

Configuration Menu Overview 59
BON-
JOURENABLESettingsYES/NO
If YES is selected, BONJOUR 
is enabled.
If 
NO is selected, BONJOUR is 
disabled.
DYNAMIC 
DNSENABLESettingsYES/NO
If YES is selected, DYNAMIC 
DNS
 is enabled.
If 
NO is selected, DYNAMIC 
DNS
 is disabled.
IPP ENABLESettingsYES/NO
If YES is selected, IPP is 
enabled.
If 
NO is selected, IPP is dis-
abled.
RAW 
PORTENABLESettingsYES/NO
If YES is selected, RAW 
PORT
 is enabled.
If 
NO is selected, RAW PORT 
is disabled.
BIDI-
REC-...

Configuration Menu Overview 60
SMTP ENABLESettingsYES/NO
If YES is selected, SMTP is 
enabled.
If 
NO is selected, SMTP is dis-
abled.
SNMP ENABLESettingsYES/NO
If YES is selected, SNMP is 
enabled.
If 
NO is selected, SNMP is dis-
abled.
WSD 
PRINTENABLESettingsYES/NO
If YES is selected, WSD 
PRINT
 is enabled.
If 
NO is selected, WSD 
PRINT
 is disabled.
IPSEC ENABLESettingsYES/NO
If YES is selected, IPSEC is 
enabled.
If 
NO is selected, IPSEC is 
disabled.
IP 
ACCESS 
FILTERACCESS 
PER-
MIS-...