Konica Minolta bizhub 362 User Manual

11Utility mode
11-70 362/282/222
Utility mode
Chapter 11
11.13 Password rules
When “Enhance Security” is set to “ON”, the password rules are applied, and 
the following limitations are applied to passwords in order to increase secu-
rity.
Passwords that have already been specified, but do not meet the password 
rules when “Enhance Security” is set to “ON” are not accepted when they 
are entered. In that case, the administrator should temporarily turn off “En-
hance Security”, then specify the passwords...

Utility mode11
362/282/222 11-71
Utility mode
Chapter 11
!
Detail 
When the password rules are applied, the characters that can be used 
and the number of digits in each password are limited.
Be sure that the administrator password that is specified is an adminis-
trator access code that meets the password rules. If Administrator mode 
is entered using an administrator password that does not meet the pass-
word rules and enhanced security features are applied, it will no longer 
be possible to enter...

11Utility mode
11-72 362/282/222
Utility mode
Chapter 11
Downloaded From ManualsPrinter.com Manuals 

12
Appendix
Chapter 12
Appendix
Downloaded From ManualsPrinter.com Manuals 

12Appendix
12-2 362/282/222
Appendix
Chapter 12
12 Appendix
12.1 Entering text
This section contains details on using the keyboard that appears in the touch 
panel for typing in passwords and text to register one-touch recipients. The 
keypad can also be used to type in numbers.
The following procedure describes how to enter characters in the User Name 
screen when registering users for user authentication.
To type text
%In the keyboard that ap-
peared, touch the button 
for the desired charac-
ter.
–...

Appendix12
362/282/222 12-3
Appendix
Chapter 12
2
Note 
To cancel the entered text, touch [Cancel].
To clear all entered text, press the [C] (clear) key.
!
Detail 
To switch between entering letters or symbols, touch the button for 
switching the input mode.
To change a character in the entered text, touch   and   to move 
the cursor to the character to be changed, touch [Del.], and then type in 
the desired letter or number.
The software switch settings can be used to change how characters are 
deleted....

12Appendix
12-4 362/282/222
Appendix
Chapter 12
12.2 Glossary
TermDefinition
Simplex/Duplex Select the setting to specify if the scanned document and the printed 
copy are printed on just one side or both sides.
Access lock Operations that the access lock is applied to are locked so that the 
password cannot be entered after it has been incorrectly entered 
three consecutive times.
Accessibility Specify these settings to set up and adjust the control panel and 
touch panel.
Account Track Set this...

Appendix12
362/282/222 12-5
Appendix
Chapter 12
Enhance Security The various enhanced security features for preventing unauthorized 
use of this machine and for increasing security when managing 
saved data.
Enlarge Display In this mode, the screens are displayed larger for easier operation.
Erase Set this function to erase the unwanted parts of the document im-
age.
Finisher This unit sorts and finishes copies that have been fed out.
Fold & Staple Set this function to fold the copies in half and staple...

12Appendix
12-6 362/282/222
Appendix
Chapter 12
Minimal Select this setting to produce a copy with the original image slightly 
reduced.
Mixed Original Select this setting to detect the size of each document page and 
print a copy on paper of the appropriate size when a document with 
different page sizes is loaded together into the ADF.
Offset Select this setting to separate copies that are fed out.
OHP Interleave Set this function to insert paper between overhead projector trans-
parencies that are...

Appendix12
362/282/222 12-7
Appendix
Chapter 12
12.3 Index
Symbols
[Power] (auxiliary power key) ......... 2-22
×1.0 setting
 .................................... 3-29
Numerics
1st tray ........................................... 2-54
2 in 1
 .............................................. 3-47
2 staples setting
 ............................ 3-52
2nd tray
 .......................................... 2-54
4 in 1
 .............................................. 3-48
A
Access lock...