Konica Minolta bizhub 211 User Manual
Here you can view all the pages of manual Konica Minolta bizhub 211 User Manual. The Konica manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 211
![Page 211
Utility mode/Copy mode parameters7
bizhub 163/211 7-7Displaying the MACHINE SETTING menu
1Press the [Utility] key.
The UTILITY MODE menu appears.
2Press the [+] or [,] key until MACHINE SETTING is selected, and
then press the [OK] key.
3Press the [+] or [,] key until the desired MACHINE SETTING parameter
is selected.
– The following MACHINE SETTING parameters are available.
AUTO PANEL RESET
ENERGY SAVE MODE
AUTO SHUT OFF
DENSITY (ADF)
DENSITY (BOOK)
PRINT DENSITY
LCD CONTRAST
KEY SPEED SETTING...](http://img.usermanuals.tech/thumb/2790/37202/w300_Konica_Minolta_bizhub_211-210.png "Page 211
Utility mode/Copy mode parameters7
bizhub 163/211 7-7Displaying the MACHINE SETTING menu
1Press the [Utility] key.
The UTILITY MODE menu appears.
2Press the [+] or [,] key until MACHINE SETTING is selected, and
then press the [OK] key.
3Press the [+] or [,] key until the desired MACHINE SETTING parameter
is selected.
– The following MACHINE SETTING parameters are available.
AUTO PANEL RESET
ENERGY SAVE MODE
AUTO SHUT OFF
DENSITY (ADF)
DENSITY (BOOK)
PRINT DENSITY
LCD CONTRAST
KEY SPEED SETTING...")
Utility mode/Copy mode parameters7 bizhub 163/211 7-7Displaying the MACHINE SETTING menu 1Press the [Utility] key. The UTILITY MODE menu appears. 2Press the [+] or [,] key until MACHINE SETTING is selected, and then press the [OK] key. 3Press the [+] or [,] key until the desired MACHINE SETTING parameter is selected. – The following MACHINE SETTING parameters are available. AUTO PANEL RESET ENERGY SAVE MODE AUTO SHUT OFF DENSITY (ADF) DENSITY (BOOK) PRINT DENSITY LCD CONTRAST KEY SPEED SETTING...
Page 212
![Page 212
7Utility mode/Copy mode parameters
7-8 bizhub 163/211Changing settings for the auto panel reset operation (AUTO PANEL
RESET parameter)
1Display the MACHINE SETTING menu.
– Refer to Displaying the MACHINE SETTING menu on page 7-7.
2Press the [+] or [,] key until AUTO PANEL RESET is selected, and
then press the [OK] key.
3Press the [+] or [,] key until OFF, 30sec, 1min, 2min, 3min,
4min or 5min is selected, and then press the [OK] key.
The MACHINE SETTING menu appears again.
UTILITY MODE
PAPER SOURCE...](http://img.usermanuals.tech/thumb/2790/37202/w300_Konica_Minolta_bizhub_211-211.png "Page 212
7Utility mode/Copy mode parameters
7-8 bizhub 163/211Changing settings for the auto panel reset operation (AUTO PANEL
RESET parameter)
1Display the MACHINE SETTING menu.
– Refer to Displaying the MACHINE SETTING menu on page 7-7.
2Press the [+] or [,] key until AUTO PANEL RESET is selected, and
then press the [OK] key.
3Press the [+] or [,] key until OFF, 30sec, 1min, 2min, 3min,
4min or 5min is selected, and then press the [OK] key.
The MACHINE SETTING menu appears again.
UTILITY MODE
PAPER SOURCE...")
7Utility mode/Copy mode parameters 7-8 bizhub 163/211Changing settings for the auto panel reset operation (AUTO PANEL RESET parameter) 1Display the MACHINE SETTING menu. – Refer to Displaying the MACHINE SETTING menu on page 7-7. 2Press the [+] or [,] key until AUTO PANEL RESET is selected, and then press the [OK] key. 3Press the [+] or [,] key until OFF, 30sec, 1min, 2min, 3min, 4min or 5min is selected, and then press the [OK] key. The MACHINE SETTING menu appears again. UTILITY MODE PAPER SOURCE...
Page 213
![Page 213
Utility mode/Copy mode parameters7
bizhub 163/211 7-9Specifying energy-saving (Power Save mode) settings (ENERGY SAVE
MODE parameter)
1Display the MACHINE SETTING menu.
– Refer to Displaying the MACHINE SETTING menu on page 7-7.
2Press the [+] or [,] key until ENERGY SAVE MODE is selected, and
then press the [OK] key.
3Use the keypad to type in the length of time until the machine enters
Power Save mode, and then press the [OK] key.
– The time can be set between 1 and 240 minutes.
UTILITY MODE
PAPER...](http://img.usermanuals.tech/thumb/2790/37202/w300_Konica_Minolta_bizhub_211-212.png "Page 213
Utility mode/Copy mode parameters7
bizhub 163/211 7-9Specifying energy-saving (Power Save mode) settings (ENERGY SAVE
MODE parameter)
1Display the MACHINE SETTING menu.
– Refer to Displaying the MACHINE SETTING menu on page 7-7.
2Press the [+] or [,] key until ENERGY SAVE MODE is selected, and
then press the [OK] key.
3Use the keypad to type in the length of time until the machine enters
Power Save mode, and then press the [OK] key.
– The time can be set between 1 and 240 minutes.
UTILITY MODE
PAPER...")
Utility mode/Copy mode parameters7 bizhub 163/211 7-9Specifying energy-saving (Power Save mode) settings (ENERGY SAVE MODE parameter) 1Display the MACHINE SETTING menu. – Refer to Displaying the MACHINE SETTING menu on page 7-7. 2Press the [+] or [,] key until ENERGY SAVE MODE is selected, and then press the [OK] key. 3Use the keypad to type in the length of time until the machine enters Power Save mode, and then press the [OK] key. – The time can be set between 1 and 240 minutes. UTILITY MODE PAPER...
Page 214
![Page 214
7Utility mode/Copy mode parameters
7-10 bizhub 163/211– To correct the entered number, press the [Clear/Stop] key, and then
type in the correct number.
The MACHINE SETTING menu appears again.
Downloaded From ManualsPrinter.com Manuals](http://img.usermanuals.tech/thumb/2790/37202/w300_Konica_Minolta_bizhub_211-213.png "Page 214
7Utility mode/Copy mode parameters
7-10 bizhub 163/211– To correct the entered number, press the [Clear/Stop] key, and then
type in the correct number.
The MACHINE SETTING menu appears again.
Downloaded From ManualsPrinter.com Manuals")
7Utility mode/Copy mode parameters 7-10 bizhub 163/211– To correct the entered number, press the [Clear/Stop] key, and then type in the correct number. The MACHINE SETTING menu appears again. Downloaded From ManualsPrinter.com Manuals
Page 215
Utility mode/Copy mode parameters7 bizhub 163/211 7-11Changing settings for the auto shut-off operation (AUTO SHUT OFF parameter) Select whether or not to turn off the auto shut-off feature. If it is turned on, specify the length of time until the auto shut-off operation is performed. 2 Note If the machine is turned off with the auto shut-off operation, copies/print- outs cannot be printed. To print copies/printouts, turn on the machine. The auto shut-off feature cannot be turned off if the AUTO SHUT...
Page 216
![Page 216
7Utility mode/Copy mode parameters
7-12 bizhub 163/211
3Press the [+] or [,] key until OFF or ON is selected.
– If OFF was selected, press the [OK] key.
– If ON was selected, use the keypad to type in the length of time
until the auto shut-off operation is performed, and then press the
[OK] key.
– The time can be set between 15 and 240 minutes.
– To correct the entered number, press the [Clear/Stop] key, and then
type in the correct number.
– If the AUTO SHUT OFF parameter in the ADMIN.
MANAGEMENT...](http://img.usermanuals.tech/thumb/2790/37202/w300_Konica_Minolta_bizhub_211-215.png "Page 216
7Utility mode/Copy mode parameters
7-12 bizhub 163/211
3Press the [+] or [,] key until OFF or ON is selected.
– If OFF was selected, press the [OK] key.
– If ON was selected, use the keypad to type in the length of time
until the auto shut-off operation is performed, and then press the
[OK] key.
– The time can be set between 15 and 240 minutes.
– To correct the entered number, press the [Clear/Stop] key, and then
type in the correct number.
– If the AUTO SHUT OFF parameter in the ADMIN.
MANAGEMENT...")
7Utility mode/Copy mode parameters 7-12 bizhub 163/211 3Press the [+] or [,] key until OFF or ON is selected. – If OFF was selected, press the [OK] key. – If ON was selected, use the keypad to type in the length of time until the auto shut-off operation is performed, and then press the [OK] key. – The time can be set between 15 and 240 minutes. – To correct the entered number, press the [Clear/Stop] key, and then type in the correct number. – If the AUTO SHUT OFF parameter in the ADMIN. MANAGEMENT...
Page 217
![Page 217
Utility mode/Copy mode parameters7
bizhub 163/211 7-13Changing the image quality level when the document feeder is used
(DENSITY (ADF) parameter)
1Display the MACHINE SETTING menu.
– Refer to Displaying the MACHINE SETTING menu on page 7-7.
2Press the [+] or [,] key until DENSITY (ADF) is selected, and then
press the [OK] key.
3Press the [+] or [,] key until MODE1 or MODE2 is selected, and
then press the [OK] key.
The MACHINE SETTING menu appears again.
UTILITY MODE
PAPER SOURCE SETUP
MACHINE...](http://img.usermanuals.tech/thumb/2790/37202/w300_Konica_Minolta_bizhub_211-216.png "Page 217
Utility mode/Copy mode parameters7
bizhub 163/211 7-13Changing the image quality level when the document feeder is used
(DENSITY (ADF) parameter)
1Display the MACHINE SETTING menu.
– Refer to Displaying the MACHINE SETTING menu on page 7-7.
2Press the [+] or [,] key until DENSITY (ADF) is selected, and then
press the [OK] key.
3Press the [+] or [,] key until MODE1 or MODE2 is selected, and
then press the [OK] key.
The MACHINE SETTING menu appears again.
UTILITY MODE
PAPER SOURCE SETUP
MACHINE...")
Utility mode/Copy mode parameters7 bizhub 163/211 7-13Changing the image quality level when the document feeder is used (DENSITY (ADF) parameter) 1Display the MACHINE SETTING menu. – Refer to Displaying the MACHINE SETTING menu on page 7-7. 2Press the [+] or [,] key until DENSITY (ADF) is selected, and then press the [OK] key. 3Press the [+] or [,] key until MODE1 or MODE2 is selected, and then press the [OK] key. The MACHINE SETTING menu appears again. UTILITY MODE PAPER SOURCE SETUP MACHINE...
Page 218
![Page 218
7Utility mode/Copy mode parameters
7-14 bizhub 163/211Changing the image quality level when the original glass is used
(DENSITY (BOOK) parameter)
1Display the MACHINE SETTING menu.
– Refer to Displaying the MACHINE SETTING menu on page 7-7.
2Press the [+] or [,] key until DENSITY (BOOK) is selected, and then
press the [OK] key.
3Press the [+] or [,] key until MODE1 or MODE2 is selected, and
then press the [OK] key.
The MACHINE SETTING menu appears again.
UTILITY MODE
PAPER SOURCE SETUP
MACHINE...](http://img.usermanuals.tech/thumb/2790/37202/w300_Konica_Minolta_bizhub_211-217.png "Page 218
7Utility mode/Copy mode parameters
7-14 bizhub 163/211Changing the image quality level when the original glass is used
(DENSITY (BOOK) parameter)
1Display the MACHINE SETTING menu.
– Refer to Displaying the MACHINE SETTING menu on page 7-7.
2Press the [+] or [,] key until DENSITY (BOOK) is selected, and then
press the [OK] key.
3Press the [+] or [,] key until MODE1 or MODE2 is selected, and
then press the [OK] key.
The MACHINE SETTING menu appears again.
UTILITY MODE
PAPER SOURCE SETUP
MACHINE...")
7Utility mode/Copy mode parameters 7-14 bizhub 163/211Changing the image quality level when the original glass is used (DENSITY (BOOK) parameter) 1Display the MACHINE SETTING menu. – Refer to Displaying the MACHINE SETTING menu on page 7-7. 2Press the [+] or [,] key until DENSITY (BOOK) is selected, and then press the [OK] key. 3Press the [+] or [,] key until MODE1 or MODE2 is selected, and then press the [OK] key. The MACHINE SETTING menu appears again. UTILITY MODE PAPER SOURCE SETUP MACHINE...
Page 219
![Page 219
Utility mode/Copy mode parameters7
bizhub 163/211 7-15Changing the print density (PRINT DENSITY parameter)
1Display the MACHINE SETTING menu.
– Refer to Displaying the MACHINE SETTING menu on page 7-7.
2Press the [+] or [,] key until PRINT DENSITY is selected, and then
press the [OK] key.
3Press the [*] or [)] key until the desired density level is selected, and
then press the [OK] key.
The MACHINE SETTING menu appears again.
UTILITY MODE
PAPER SOURCE SETUP
MACHINE SETTING
CUSTOM SIZE MEMORY
MACHINE...](http://img.usermanuals.tech/thumb/2790/37202/w300_Konica_Minolta_bizhub_211-218.png "Page 219
Utility mode/Copy mode parameters7
bizhub 163/211 7-15Changing the print density (PRINT DENSITY parameter)
1Display the MACHINE SETTING menu.
– Refer to Displaying the MACHINE SETTING menu on page 7-7.
2Press the [+] or [,] key until PRINT DENSITY is selected, and then
press the [OK] key.
3Press the [*] or [)] key until the desired density level is selected, and
then press the [OK] key.
The MACHINE SETTING menu appears again.
UTILITY MODE
PAPER SOURCE SETUP
MACHINE SETTING
CUSTOM SIZE MEMORY
MACHINE...")
Utility mode/Copy mode parameters7 bizhub 163/211 7-15Changing the print density (PRINT DENSITY parameter) 1Display the MACHINE SETTING menu. – Refer to Displaying the MACHINE SETTING menu on page 7-7. 2Press the [+] or [,] key until PRINT DENSITY is selected, and then press the [OK] key. 3Press the [*] or [)] key until the desired density level is selected, and then press the [OK] key. The MACHINE SETTING menu appears again. UTILITY MODE PAPER SOURCE SETUP MACHINE SETTING CUSTOM SIZE MEMORY MACHINE...
Page 220
![Page 220
7Utility mode/Copy mode parameters
7-16 bizhub 163/211Changing the display contrast (LCD CONTRAST parameter)
1Display the MACHINE SETTING menu.
– Refer to Displaying the MACHINE SETTING menu on page 7-7.
2Press the [+] or [,] key until LCD CONTRAST is selected, and then
press the [OK] key.
3Press the [*] or [)] key until the desired contrast is selected, and then
press the [OK] key.
The MACHINE SETTING menu appears again.
UTILITY MODE
PAPER SOURCE SETUP
MACHINE SETTING
CUSTOM SIZE MEMORY
MACHINE...](http://img.usermanuals.tech/thumb/2790/37202/w300_Konica_Minolta_bizhub_211-219.png "Page 220
7Utility mode/Copy mode parameters
7-16 bizhub 163/211Changing the display contrast (LCD CONTRAST parameter)
1Display the MACHINE SETTING menu.
– Refer to Displaying the MACHINE SETTING menu on page 7-7.
2Press the [+] or [,] key until LCD CONTRAST is selected, and then
press the [OK] key.
3Press the [*] or [)] key until the desired contrast is selected, and then
press the [OK] key.
The MACHINE SETTING menu appears again.
UTILITY MODE
PAPER SOURCE SETUP
MACHINE SETTING
CUSTOM SIZE MEMORY
MACHINE...")
7Utility mode/Copy mode parameters 7-16 bizhub 163/211Changing the display contrast (LCD CONTRAST parameter) 1Display the MACHINE SETTING menu. – Refer to Displaying the MACHINE SETTING menu on page 7-7. 2Press the [+] or [,] key until LCD CONTRAST is selected, and then press the [OK] key. 3Press the [*] or [)] key until the desired contrast is selected, and then press the [OK] key. The MACHINE SETTING menu appears again. UTILITY MODE PAPER SOURCE SETUP MACHINE SETTING CUSTOM SIZE MEMORY MACHINE...