Konica Minolta bizhub 211 User Manual

Utility mode/Copy mode parameters7
bizhub 163/211 7-37
7.7 ADMIN. MANAGEMENT
From the ADMIN. MANAGEMENT menu, various parameters for 
controlling the use of the machine can be specified. In order to specify 
settings for the ADMIN. MANAGEMENT parameters, the administrator 
access code must be entered.
ADMIN. MANAGEMENT parameters
No.ADMIN. MANAGEMENTDescription
1 ADMINISTRATOR NO. This parameter can be used to change the currently speci-
fied administrator access code to a different number.
2 AUTO SHUT...

7Utility mode/Copy mode parameters
7-38 bizhub 163/211
2
Note 
For details on programming and specifying settings for the administrator 
access code, contact your service representative.
2
Reminder 
The administrator should be sure to keep the administrator access code 
in a safe place.
Downloaded From ManualsPrinter.com Manuals 

Utility mode/Copy mode parameters7
bizhub 163/211 7-39Displaying the ADMIN. MANAGEMENT menu
1Press the [Utility] key.
The UTILITY MODE menu appears.
2Press the [+] or [,] key until ADMIN. MANAGEMENT is selected, and 
then press the [OK] key.
3Use the keypad to type in the administrator access code, and then 
press the [OK] key.
– The default administrator access code is 000000.
– To correct the entered number, press the [Clear/Stop] key, and then 
type in the correct number.
The ADMIN. MANAGEMENT menu...

7Utility mode/Copy mode parameters
7-40 bizhub 163/211
4Press the [+] or [,] key until the desired ADMIN. MANAGEMENT 
parameter is selected, and then press the [OK] key.
– [NETWORK SETTING], [E-MAIL SETTING 1], [E-MAIL SETTING 2], 
[LDAP SETTING] and [USER SETTING] appear only when optional 
image controller IC-206 or network interface card NC-503 is 
installed.
– The following ADMIN. MANAGEMENT parameters are available.
ADMINISTRATOR NO.
AUTO SHUT OFF
ACCOUNT TRACK
NETWORK SETTING
E-MAIL SETTING 1...

Utility mode/Copy mode parameters7
bizhub 163/211 7-41Changing the administrator access code (ADMINISTRATOR NO. 
parameter)
1Display the ADMIN. MANAGEMENT menu.
– Refer to Displaying the ADMIN. MANAGEMENT menu on 
page 7-39.
2Press the [+] or [,] key until ADMINISTRATOR NO. is selected, and 
then press the [OK] key.
3Use the keypad to type in the current administrator access code, and 
then press the [OK] key.
UTILITY MODE
ADMIN. MANAGEMENT
USER MANAGEMENT
COPY SETTING 1
ADMIN. MANAGEMENT
AUTO SHUT OFF...

7Utility mode/Copy mode parameters
7-42 bizhub 163/211– To correct the entered number, press the [Clear/Stop] key, and then 
type in the correct number.
4Use the keypad to type in the new administrator access code, and then 
press the [OK] key.
5Use the keypad to type in the new administrator access code again for 
confirmation, and then press the [OK] key.
The ADMIN. MANAGEMENT menu appears again.
ADMINISTRATOR NUMBER
 NEW NUMBER:******
ADMINISTRATOR NUMBER
 CONFIRM NO.:******
Downloaded From...

Utility mode/Copy mode parameters7
bizhub 163/211 7-43Enabling the AUTO SHUT OFF parameter to be set to OFF (AUTO 
SHUT OFF parameter)
1Display the ADMIN. MANAGEMENT menu.
– Refer to Displaying the ADMIN. MANAGEMENT menu on 
page 7-39.
2Press the [+] or [,] key until AUTO SHUT OFF is selected, and then 
press the [OK] key.
3Press the [+] or [,] key until ENABLE is selected, and then press the 
[OK] key.
The ADMIN. MANAGEMENT menu appears again.
UTILITY MODE
ADMIN. MANAGEMENT
USER MANAGEMENT
COPY SETTING...

7Utility mode/Copy mode parameters
7-44 bizhub 163/211
4In the UTILITY MODE menu, select MACHINE SETTING.
– Refer to Displaying the MACHINE SETTING menu on page 7-7.
5Press the [+] or [,] key until AUTO SHUT OFF is selected, and then 
press the [OK] key.
6Press the [+] or [,] key until OFF is selected, and then press the [OK] 
key.
The MACHINE SETTING menu appears again.
UTILITY MODE 
PAPER SOURCE SETUP
MACHINE SETTING
CUSTOM SIZE MEMORY
MACHINE SETTING
ENERGY SAVE MODE
AUTO PANEL RESET
AUTO SHUT OFF...

Utility mode/Copy mode parameters7
bizhub 163/211 7-45Enabling/disabling account number management
1Display the ADMIN. MANAGEMENT menu.
– Refer to Displaying the ADMIN. MANAGEMENT menu on 
page 7-39.
2Press the [+] or [,] key until ACCOUNT TRACK is selected, and then 
press the [OK] key.
3Press the [+] or [,] key until ACCOUNT TRACK MODE is selected, 
and then press the [OK] key.
UTILITY MODE
ADMIN. MANAGEMENT
USER MANAGEMENT
COPY SETTING 1
ADMIN. MANAGEMENT
AUTO SHUT OFF
ADMINISTRATOR NO.
ACCOUNT TRACK...

7Utility mode/Copy mode parameters
7-46 bizhub 163/211
4Press the [+] or [,] key until ON is selected, and then press the [OK] 
key.
The ACCOUNT TRACK menu appears again.
ACCOUNT TRACK MODE
ON
OFF
Downloaded From ManualsPrinter.com Manuals