Konica Minolta bizhub 211 User Manual

Advanced copy operations6
bizhub 163/211 6-33Copying with a recalled copy program
1Position the document to be copied.
– Refer to Loading the document on page 4-18.
2Press the [Mode Memory] key.
3Press the [+] or [,] key until RECALL is selected, and then press the 
[OK] key.
4Press the [+] or [,] key until the desired program number is selected, 
and then press the [OK] key.
5Press the [Start] key.
MODE MEMORY
REGISTER
RECALL
MODE MEMORY REGIST.
PROGRAM2
PROGRAM1
Downloaded From ManualsPrinter.com Manuals 

6Advanced copy operations
6-34 bizhub 163/211
6.9 Copying using an account number
If account numbers have been specified, use of the machine can be limited 
to specific users or to a specified number of copies for each account.
The following procedure describes how to make copies after entering an 
account number.
Entering the account number
!
Detail 
If account numbers have been specified, the machine cannot be used 
unless the account number is entered first.
In order to use this function, the account...

Advanced copy operations6
bizhub 163/211 6-35
2Press the [Access] key.
The basic screen appears and 
copying can be started.
3Position the document(s) to be copied, and then select the desired 
copy settings.
– Refer to Before making copies on page 4-3.
– Refer to Advanced copy operations on page 6-3.
4Press the [Start] key.
5When you are finished making copies, press the [Access] key again.
Downloaded From ManualsPrinter.com Manuals 

6Advanced copy operations
6-36 bizhub 163/211
Downloaded From ManualsPrinter.com Manuals 

7Utility mode/Copy mode 
parameters
Downloaded From ManualsPrinter.com Manuals 

Downloaded From ManualsPrinter.com Manuals 

Utility mode/Copy mode parameters7
bizhub 163/211 7-3
7 Utility mode/Copy mode parameters
7.1 Utility mode
There are eight parameter in the Utility mode.
2
Note 
Depending on the options installed, some parameters may not be 
available. If an unavailable parameter is selected, an error message 
appears.
No.NameDescriptionPage reference
1 MACHINE SET-
TINGUsed to specify settings for the machine’s oper-
ating environment.p. 7-6
2PAPER SOURCE 
SETUPUsed to specify the size and type of paper load-
ed in the...

7Utility mode/Copy mode parameters
7-4 bizhub 163/211
7.2 Utility mode/Copy mode parameters
* indicates manufacturer’s default settings.
MenuParameterSettings
MACHINE SET-
TINGAUTO PANEL RESET OFF / 30sec / 1min* / 2min / 3min / 4min / 5min
ENERGY SAVE MODE 1 to 240 minutes (default: 15 minutes)
AUTO SHUT OFF OFF* / ON (15 to 240 minutes)
DENSITY (ADF) MODE 1* / MODE 2
DENSITY (BOOK) MODE 1* / MODE 2
PRINT DENSITY
LCD CONTRAST
KEY SPEED SETTING TIME TO START (0.1sec / 0.3sec / 0.5sec / 
1.0sec* / 1.5sec...

Utility mode/Copy mode parameters7
bizhub 163/211 7-5
COPY SETTING 1 PAPER PRIORITY TRAY1* / TRAY2 / TRAY3 / TRAY4 / TRAY5 / 
MULTI BYPASS
QUALITY PRIORITY TEXT/PHOTO* / TEXT / PHOTO
DENSITY PRIORITY AUTO* / MANUAL
DENSITY LEVEL AUTO
MANUAL
BINDING POSITION LEFT* / RIGHT
MARGIN SETTING 0 mm to 20 mm (default: 10 mm)
ERASE SETTING LEFT* / UPPER / FRAME
(5 to 20 mm; default: 10 mm)
SMALL ORIGINAL DISABLE* / ENABLE
COPY SETTING 2 COPY PRIORITY AUTO PAPER SELECT* / AUTO ZOOM / MAN-
UAL
OUTPUT PRIORITY...

7Utility mode/Copy mode parameters
7-6 bizhub 163/211
7.3 MACHINE SETTING
From the MACHINE SETTING menu, the following machine settings can be 
changed.
MACHINE SETTING parameters
No.MACHINE SET-
TINGDescription
1 AUTO PANEL RE-
SETThis parameter can be used to specify the length of time until the 
auto panel reset operation is performed after copying or the oper-
ation for the last key pressed is finished. When the auto panel reset 
operation is performed, the machine automatically returns to the...