JVC Gz Ex310bu User Manual

AUTHENTICATE
METHODSet this when the authentication method needs to
be changed.USERNAMEEnter the username.PASSWORDEnter the password.Caution : 
0 It is necessary to obtain an e-mail account in advance.
0 Some web-based mail addresses do not support this feature.
0 These are Gmail settings as of December 2012.
Perform setting manually if changes have been made to the Gmail
specifications.
0 To make use of addresses other than Gmail, please consult the mail
service provider (Internet provider, etc.) for...

.
7Tap “ADD”.
(Operation on this camera)
.
8Enter the recipient’s e-mail address.
.
0Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
“ABC”, for example, enter “A” by tapping once, “B” by tapping twice,
or “C” by tapping 3 times.
0 Tap “DELETE” to delete a character.
0 Tap “CANCEL” to exit.
0 Tap “A/a/1” to select character input type from upper case letter, lower
case letter, and number.
0 Tap  0026 or  0027 to move one space to the left or right.
0 After setting,...

Setting the Detection Method of this Camera (DETECT/MAIL
SETTING)
Sets the detection method to start recording.
1 Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
) icon.
(Operation on this camera)
.
3Tap “DETECT/MAIL” ( 0012).
(Operation on this camera)
.
4Tap “DETECTION METHOD”.
(Operation on this camera)
.
5Tap “MOTION DETECTION” or “FACE DETECTION” to make a
selection.
.
0Select “MOTION DETECTION” to start recording upon detection of
subject’s movements.
0...

Setting Self Recording on this Camera (DETECT/MAILSETTING)
Sets whether to record videos on this camera during detection.
1 Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
) icon.
(Operation on this camera)
.
3Tap “DETECT/MAIL” ( 0012).
(Operation on this camera)
.
4Tap “SELF RECORDING”.
(Operation on this camera)
.
5Tap “ON” or “OFF” to make a selection.
.
0Select “ON” to record videos on this camera.
0 Select “OFF” not to record videos on this camera....

.
5Tap “ACCESS POINTS”.
(Operation on this camera)
.
6Tap “ADD”.
(Operation on this camera)
.
7Tap “EZ REGISTRATION WPS”.
(Operation on this camera)
.
8Activate WPS of the access point (wireless LAN router) within 2 minutes.
0 To activate WPS, refer to the instruction manual of the device in use.
9 After registration is complete, tap “OK” on the camera’s screen.
(Operation on this camera)
.
oSearch and Register1
Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
)...

7Tap “SEARCH”.
(Operation on this camera)
.
0The search results appear on the camera’s screen.
8 Tap the name (SSID) of the desired access point from the list of search
results.
(Operation on this camera)
.
9Register a password.
(Operation on this camera)
.
0Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
“ABC”, for example, enter “A” by tapping once, “B” by tapping twice,
or “C” by tapping 3 times.
0 Tap “DELETE” to delete a character.
0 Tap “CANCEL” to exit.
0...

7Tap “MANUAL”.
(Operation on this camera)
.
8Enter the name (SSID) of the access point (wireless LAN router) and tap
“SET”.
(Operation on this camera)
.
0Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
“ABC”, for example, enter “A” by tapping once, “B” by tapping twice,
or “C” by tapping 3 times.
0 Tap “DELETE” to delete a character.
0 Tap “CANCEL” to exit.
0 Tap “A/a/1” to select character input type from upper case letter, lower
case letter, and number.
0 Tap...

oWPS PIN Registration1
Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
) icon.
(Operation on this camera)
.
3Tap  001D on the lower right of the screen.
(Operation on this camera)
.
4Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)
.
5Tap “ACCESS POINTS”.
(Operation on this camera)
.
6Tap “ADD”.
(Operation on this camera)
.
7Tap “WPS PIN”.
(Operation on this camera)
.
0The PIN code appears.
8 Enter the PIN code displayed on the camera to the access point...

Editing LAN Settings of Access Points (Wireless LAN Router)
Change accordingly such as when you want to fix the IP address for the
camera.
1 Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
) icon.
(Operation on this camera)
.
3Tap  001D on the lower right of the screen.
(Operation on this camera)
.
4Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)
.
5Tap “ACCESS POINTS”.
(Operation on this camera)
.
6Tap “LAN SETTINGS”.
(Operation on this camera)
.
0 Tap...

Setting the Password (DIRECT MONITORING)
Sets the password for direct monitoring. (8 to 32 characters)
1Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
) icon.
(Operation on this camera)
.
3Tap the “DIRECT MONITORING” ( 0010) icon in the “Wi-Fi” menu.
(Operation on this camera)
.
4Tap “PASSWORD”.
(Operation on this camera)
.
5Register a password.
(Operation on this camera)
.
0Tap on the on-screen keyboard to enter characters. The character
changes with every tap....