JVC Gz Ex310bu User Manual

.
0The URL (WAN) for the smartphone to connect to appears.
(Does not appear if DDNS is not set or set incorrectly.)
0 “L UPnP” is displayed when UPnP cannot be used.
7 Check the URL (WAN).
.
0After checking the URL, tap “QUIT” to return to the previous screen.
0 “L UPnP” is displayed when UPnP cannot be used.
o Operation on the smartphone
1
Start “Everio sync. 2” on the smartphone after setting “OUTDOOR
MONITORING”.
.
0Tap “START” in OUTDOOR MONITORING on the camera to start.
2 Tap “OUTDOOR MONITORING”....

0The username is “everio” and the default password is “0000”.
“Changing the Settings” ( A p. 153)
0 Operations from the Web browser
“Using the Wi-Fi Function from a Web Browser” ( A p. 188)Caution : 
0
To monitor images while you are out, make sure in advance that you can
establish a connection via the Internet by entering the URL (WAN)
displayed in “Network Information”.
However, you cannot monitor (operate) in the same way as while you are out when your smartphone (or computer) is connected via access...

.
4Tap “DETECT/MAIL ATTN.”.
.
5Select “DETECT/MAIL ATTN.”, then tap  0029.
.
0 To display the  0012 icon, tap the e-mail address.
0 To cancel the e-mail address, press the icon one more time.
0 Up to 8 e-mail addresses can be selected.
6 Tap “START” ( 000C).
.
7 Start making a connection.
.
8DETECT/MAIL detection standby
.
0Detection is suspended for the first 5 seconds.
9 DETECT/MAIL detection in progress (an e-mail is automatically sent out
after detection is completed)
.
0 The “PHOTO” icon appears on...

Record and Send Videos via E-mail (VIDEOMAIL)
Videos of up to 15 seconds can be recorded and sent via e-mail.
With this function, short videos can be delivered easily even on a daily basis, such as to show the growing up of small children to their distant
grandparents.
.Memo : 
0Specifications of the videos sent via video mail are as follows:
System: MP4
Video:
- H.264/MPEG-4 AVC baseline profile codec
- 640 x 360 resolution
- 30p frame rate
- 1 Mbps bit rate
Audio:
- Advanced Audio Coding (AAC) system
-...

9Tap “SEND”.
.
0Sending of the video mail starts.
0 To check the file, tap “PLAY TO CHECK”.
0 When it is complete, tap “OK”.
Caution : 
0
Be careful not to cause too much sending of e-mails. Depending on the
internet provider that provides the e-mail service, the e-mails may be
marked as spam or the usage limited may be exceeded.
Be sure to check the terms of the internet provider in advance to find out
if there are any restrictions on the number or size of e-mails that can be
sent.
0 When setting...

(Operation on this camera).
6Connection in progress
.
7After the connection is completed, wait for the DLNA device to start up.
(Operation on this camera)
.
0If a considerable number of videos/still images are recorded in the
camera, it may take some time to start.
8 Operate from the DLNA device
0 From the DLNA device, access to the still image folder on Everio to
select the images to playback.
0 For operation details, refer to the instruction manual of the DLNA
device in use.
9 Images appear on the...

5Connection is established; backup starts.
(Operation on this camera)
.
6Everio Watcher appears on the task bar of the computer.
0 To see the status of backing up and remaining time, move the arrow
to it.
7 Backup is completed.
(Operation on this camera)
.
0Tap “OK”, or wait for about 10 seconds to turn off the power
automatically.
Memo : 
0
0Recording the Location Information
You can record the location information of the venue where recording is
taking place via direct connection (Wi-Fi Direct) with a...

.
4Tap “START” ( 000C).
(Operation on this camera)
.
0When iFrame is selected for “VIDEO REC FORMAT”, the following
display appears and recording mode is switched to the 60i mode in
AVCHD.
.
5Check the SSID and the PASS being displayed on the screen of the
camera.
.
6Select the SSID in step 5 from the Wi-Fi network selection screen of your
smartphone, and enter the PASS on the password screen.
(Operation on the smartphone (or computer))
.
0For details on connecting your smartphone (or computer) to a...

5Tap “WPS”.
(Operation on this camera)
.
6Activate WPS on the smartphone (or computer) within 2 minutes.
(Operation on the smartphone (or computer))
0 To activate WPS, refer to the instruction manual of the device in use.
7 A connection is established and  0014
 appears on the camera’s screen.
.
Operation Method
1 Activate the GPS function of the smartphone.
(Operation on the smartphone)
.
0For details on using the smartphone, refer to the instruction manual
of the device in use.
2 Start “Everio sync. 2”...

.
0Press the “START/STOP” button to start a normal recording.
Memo : 
0Manual recording cannot be performed.
0 It is not possible to switch to the playback mode.Using the Pan Cradle (Sold Separately)
Panning operation (moving the camera to the left/right, horizontal direction) can be controlled via smartphone by setting the camera on the pan cradle.To use a pan cradle, change the setting of “AV TERMINAL” in advance.
Change the setting from the menu screen of the camera.
o Changing the setting of the AV...