JVC Gz Ex310bu User Manual

oSetting the camera to the pan cradle.
0 For how to connect the pan cradle and the camera, refer to the instruction
manual of the pan cradle for further details.1 Set the camera to the pan cradle.
.
0For how to connect the pan cradle and the camera, refer to the
instruction manual of the pan cradle for further details.
2 Set the power of the pan cradle to “ON”.
.
3Wait until the pan cradle stops the rotation.
.
0When the power is turned ON, pan cradle moves to the left/right to
adjust the position.
o...

.
Memo : 
0Speed of the panning operation can be set in two steps.
“Changing the Panning Speed” ( A p. 173)Changing the Settings
To use the Wi-Fi function, it may be necessary to perform some settings on
the camera and smartphone (or computer).
0 Registering the access points to connect (wireless LAN router)
“Registering the Access Points of the Camera to Connect (ACCESS
POINTS)” ( A p. 164)
0 Obtaining a dynamic DNS account
“Obtaining a Dynamic DNS (DDNS) Account” ( A p. 157)
0 Setting the account on...

Menu SettingsSettingDetailsDIRECT MONITORINGConfigures various settings related to DIRECT MONITORING.
0 PASSWORD
Sets the password to access the camera.
“Setting the Password (DIRECT MONITORING/INDOOR MONITORING/OUTDOOR MONITORING)”
( A  p. 155)
0 ENFORCED GROUP OWNER (Default: “ON”)
Set whether or not to get the owner group permissions.
・ OFF: Set this if connection to devices that support Wi-Fi Direct fails. (When set to OFF, connection to
devices that do not support Wi-Fi Direct will be disabled.)
・...

Selects the recipient’s e-mail address for video mails.
“Sending Still Images via E-mail upon Detection of Face or Movement (DETECT/MAIL)” ( A p. 142)
0 MAIL SETTING
Sets the e-mail addresses of the sender and recipient.
“Setting the Sender’s E-mail Address of the Camera” ( A p. 159)
“Registering the Recipient’s E-mail Address of the Camera” ( A p. 161)TV MONITORING0
MAC ADDRESS FILTER (Default: “OFF”)
By setting to “ON”, Everio can be searched from the device (TV monitor); the MAC address of the device...

Setting the Password (DIRECT MONITORING/INDOORMONITORING/OUTDOOR MONITORING)
Sets the password required to access the camera.
0 Up to 8 characters (alphabets, numbers and symbols only), case-
sensitive.
1 Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
) icon.
(Operation on this camera)
.
3Tap “INDOOR MONITORING” ( 0011) or “OUTDOOR MONITORING”
( 000F ).
(Operation on this camera)
.
4Tap “PASSWORD”.
(Operation on this camera)
.
5Register a password.
(Operation on...

Setting the Enforced Group Owner (DIRECT MONITORING)
Sets whether to enforce authorization of the group owner.
1Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
) icon.
(Operation on this camera)
.
3Tap the “DIRECT MONITORING” ( 0010) icon in the “Wi-Fi” menu.
(Operation on this camera)
.
4Tap “ENFORCED GROUP OWNER”.
(Operation on this camera)
.
5Tap “ON” or “OFF”.
.
0It is recommended to select “ON” usually.
If connection to devices that support Wi-Fi Direct...

Setting the UPnP of this Camera (OUTDOOR MONITORING)
Sets the UPnP of the camera.
1Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
) icon.
(Operation on this camera)
.
3Tap “OUTDOOR MONITORING” ( 000F).
(Operation on this camera)
.
4Tap “UPnP”.
(Operation on this camera)
.
5Tap “ON” or “OFF” to make a selection.
.
0Select “ON” to enable UPnP.
0 Select “OFF” to disable UPnP.
Obtaining a Dynamic DNS (DDNS) Account
By obtaining a dynamic DNS account, this unit may be...

Setting Dynamic DNS on this Camera (OUTDOOR
MONITORING)
Sets the dynamic DNS information of the obtained account on the camera.
“Obtaining a Dynamic DNS (DDNS) Account” ( A p. 157)
1
Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
) icon.
(Operation on this camera)
.
3Tap “OUTDOOR MONITORING” ( 000F).
(Operation on this camera)
.
4Tap “DDNS SETTING”.
(Operation on this camera)
.
5Tap “DDNS”, then tap “ON”.
(Operation on this camera)
6 Enter the DDNS settings...

Setting the Sender’s E-mail Address of the Camera
Sets the address to be used for sending e-mails on the camera.
Memo : 
0By using Gmail as the sender’s mail address, some of the settings can be
omitted.
Use of Gmail is recommended for users who have a Gmail account.1 Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
) icon.
(Operation on this camera)
.
3Tap  001D on the lower right of the screen.
(Operation on this camera)
.
4Tap “COMMON Wi-Fi SETTING”.
(Operation...

0Tap “A/a/1” to select character input type from upper case letter, lower
case letter, and number.
0 Tap  0026 or  0027 to move one space to the left or right.
0 After setting, tap “SET”.
9 Tap “CHANGE” to change the SMTP port.
(In case of Gmail, tap “SKIP”)
(Operation on this camera)
.
0Change the SMTP port number (if necessary) and tap “SET”.
.
0Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
0 Tap “DELETE” to delete a character.
0 Tap “CANCEL” to exit.
0 Tap...