JVC Gz Ex310bu User Manual

.
0When iFrame is selected for “VIDEO REC FORMAT”, the following
display appears and recording mode is switched to the 60i mode in
AVCHD.
0 This display disappears automatically after approximately 3 seconds,
but disappears immediately if the screen is tapped.
.
5Tap “WPS”.
(Operation on this camera)
.
6Activate WPS on the smartphone (or computer) within 2 minutes.
(Operation on the smartphone (or computer))
.
0To activate WPS, refer to the instruction manual of the device in use.
7 A connection is...

0How to operate from a smartphone
“Using Smartphone Applications” ( A p. 175)
o Computer (Windows 7)1
Tap the URL button shown on the camera’s screen.
(displayed when the computer and the camera are connected
wirelessly.)
.
0The URL for the computer to connect to appears.
2 Check the URL being displayed on the camera screen, which starts from
“http://”.
.
0After checking the URL, tap “QUIT” to return to the previous screen.
3 Start Internet Explorer (web browser) on the computer and enter the
URL.
....

.
6Tap “EXECUTE”.
.
Read a QR code.
1Read a QR code.
(Operation on this camera)
.
2Tap “YES”.
.
3Tap “OK”.
.
0Step 2-  E is displayed.
0 Set contents are saved.
Registering the access points (wireless LAN router) to this
unit
o Wi-Fi Protected Setup (WPS) Registration
1
Tap “MENU”.
(Operation on this camera)
.
0 The top menu appears.
2 Tap the “Wi-Fi” ( 0014) icon.
(Operation on this camera)
.
3Tap  001D on the lower right of the screen.
(Operation on this camera)
.
4Tap “COMMON Wi-Fi SETTING”....

.
8Activate WPS of the access point (wireless LAN router) within 2 minutes.
0 To activate WPS, refer to the instruction manual of the device in use.
9 After registration is complete, tap “OK” on the camera’s screen.
(Operation on this camera)
.
oSearch the access point, and select from the list.
Set the name (SSID) of the access point (wireless LAN router) and the
password beforehand.
1 Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
) icon.
(Operation on this...

“ABC”, for example, enter “A” by tapping once, “B” by tapping twice,
or “C” by tapping 3 times.
0 Tap “DELETE” to delete a character.
0 Tap “CANCEL” to exit.
0 Tap “A/a/1” to select character input type from upper case letter, lower
case letter, and number.
0 Tap  0026 or  0027 to move one space to the left or right.
0 The password is not required if the wireless LAN router is not security
protected.
10 After registration is complete, tap “OK” on the camera’s screen.
(Operation on this camera)
.
0Other...

.
3The recording screen is displayed.
.
0How to operate from a smartphone
“Using Smartphone Applications” ( A p. 175)
o Monitoring from the computer (Windows7)
1
Tap the URL button shown on the camera’s screen.
(displayed when the computer and the camera are connected
wirelessly.)
.
0The URL for the computer to connect to appears.
2 Check the URL being displayed on the camera screen, which starts from
“http://”.
.
0 After checking the URL, tap “QUIT” to return to the previous screen.
3 Start Internet...

OUTDOOR MONITORING
o Setting (Once setting is done, start from the “Regular
Operation” below)
Obtaining a Dynamic DNS Account
By obtaining a dynamic DNS account, this unit may be used on the web as
usual even if the IP address changes when making an access to this unit via
internet.
0 Only the JVC dynamic DNS service can be set on this camera.
To obtain (register) an account, perform the following steps.
1 Access the following URL from a browser and register for an account.
(Operation on a computer or...

2Tap “YES”.
.
3Tap “OK”.
.
0Step 2-  E is displayed.
0 Set contents are saved.
Registering the access points (wireless LAN router) to this
unit
o Wi-Fi Protected Setup (WPS) Registration
1
Tap “MENU”.
(Operation on this camera)
.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014
) icon.
(Operation on this camera)
.
3Tap  001D on the lower right of the screen.
(Operation on this camera)
.
4Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)
.
5 Tap “ACCESS POINTS”.
(Operation on this camera)
.
6Tap...

.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014) icon.
(Operation on this camera)
.
3Tap  001D on the lower right of the screen.
(Operation on this camera)
.
4Tap “COMMON Wi-Fi SETTING”.
(Operation on this camera)
.
5Tap “ACCESS POINTS”.
(Operation on this camera)
.
6Tap “ADD”.
(Operation on this camera)
.
7Tap “SEARCH”.
(Operation on this camera)
.
0 The search results appear on the camera’s screen.
8 Tap the name (SSID) of the desired access point from the list of search
results.
(Operation on this...

.
0The top menu appears.
2 Tap the “Wi-Fi” ( 0014) icon.
(Operation on this camera)
.
3Tap “OUTDOOR MONITORING” ( 000F).
(Operation on this camera)
.
4Tap “START” ( 000C).
(Operation on this camera)
.
5Start making a connection.
(Operation on this camera)
.
0Name (SSID) of the access point (wireless LAN router) in connection
is displayed.
6 The following is displayed when the camera is connected to the access
point.
.
0The URL (WAN) for the smartphone to connect to appears.
(Does not appear if DDNS is...