JBL Synthesis Sdp-5 Manual

SETUP
SDP-5
3-11LEVEL METERSIndicate fluctuating input levels in the front left (L) and front right
(R) channels for the selected input. These level meters are also
included on the STATUS menus, allowing them to indicate input
levels for both analog and digital audio input sources. However,
ANLG IN LVL menu input level adjustments only affect 2-channel
analog audio input sources.
Level meters appear in combinations of green, yellow, and red
when the on-screen display is configured for a blue-screen...

SETUP
JBL Synthesis
3-12COMPONENT IN
COMPONENT 1 to 3, NONE
Opens the COMPONENT menu shown above, which can be used
to assign a component video input connector for the selected
input. The SDP-5 has eight configurable inputs, each of which can
be assigned to any of its 3 component video input connectors.
Please note the following:
•Composite video output connectors are available when a
composite or S-video source is present.
•S-video output connectors are available when an S-video
source is present....

DVD1 INPUT SETUP
NAME DVD1
DIGITAL IN COAX-1
ANALOG IN NONE
ANLG IN LVL +0dB
VIDEO IN S-VIDEO-1
COMPONENT IN 1
2-CHL7FILM
%!D5.1 L7FILM
DTS-ES DTS-ES L7FILM
MAIN ADVANCED
ZONE2 IN DIGITALdts-ESL7FILM
SETUP
SDP-5
3-13
DDD5.1 L7FILM2-CHL7FILM
SELECTING PREFERRED LISTENING MODES
. . . Selecting Preferred Listening Modes continues on page 3-14
CD INPUT SETUP
NAME CD
DIGITAL IN COAX-3
ANALOG IN NONE
ANLG IN LVL +0dB
VIDEO IN COMPOSITE-1
COMPONENT IN NONE
2-CH L7 MUSIC
%!D5.1 L7MUSIC
DTS-ES DTS-ES L7MUSIC
MAIN...

SETUP
JBL Synthesis
3-14When the 2-CH parameter is set to USE LAST:
•The SDP-5 will not automatically activate the 2-CHANNEL
listening mode if the remote control 2 CH button was used to
activate the 2-CHANNEL listening mode the last time a
2-channel source was present. Instead, it will activate the
2-channel listening mode (i.e. L7 FILM) that was activated prior
to the 2-CHANNEL listening mode.
•The SDP-5 will automatically activate a dts NEO:6 listening
mode if a dts NEO:6 listening mode was activated...

DOLBY DOpens the DOLBY D MODE menu shown above, which can be
used to select a preferred listening mode for Dolby Digital input
sources. The SDP-5 automatically activates the selected listening
mode whenever a new input is selected or a new Dolby Digital
source is present. When set to USE LAST, the SDP-5 activates the
listening mode that was activated the last time a Dolby Digital
source was present whenever a new input is selected or a new
Dolby Digital source is present.
&&D


DVD1


INPUTS


SETUP...

SETUP
JBL Synthesis
3-16When the dts-ES parameter is set to USE LAST:
•The SDP-5 will automatically activate the dts THX MUSIC
listening mode if this listening mode was activated the last time
a dts(-ES) source was present. However, the dts THX MUSIC
listening mode cannot be selected as the preferred listening
mode for dts(-ES) sources.dts-ESOpens the dts-ES MODE menu shown above, which can be used
to select a preferred listening mode for dts(-ES) input sources. The
SDP-5 automatically activates the...

SETUP
SDP-5
3-17CONFIGURING ADVANCED ZONE SETTINGS
MAIN ADVANCEDSelecting the INPUT SETUP menu MAIN ADVANCED option opens
the MAIN ADV menu shown above. The parameters on the left side
of this menu are identical regardless of which input is selected. The
settings on the right side are adjustable. Default parameter settings
differ from input to input. The MAIN ADV menus shown at the
right indicate default parameter settings for each input.
. . . MAIN ADVANCED continues on page 3-18
MAIN ADVANCED


DVD1

...

SETUP
JBL Synthesis
3-18
Note:When the INPUT SELECT parameter is set to AUTO,
the SDP-5 will not select the assigned analog audio
input connector when a valid digital audio input
source is present. Some DVD and CD players output
digital signals (data) when the player is paused or
stopped or when the player is powered on and the
disc drawer is empty. When this occurs, the SDP-5
automatically selects the assigned digital audio inputconnector.
INPUT SELECT
DIGITAL, ANALOG, AUTO
Controls the interaction of...

SETUP
SDP-5
3-19
DIGITAL
ANALOG
AUTO
The SDP-5 automatically sets the INPUT
SELECT parameter to DIGITAL when the
ANALOG IN parameter is set to NONE.
•The SDP-5 sends the assigned digital
audio input connector to the Main Zone
audio output connectors. The SDP-5
ignores the assigned analog audio input
connector.
•The digital audio input connectors are
compatible with PCM (44.1, 48, 88.2,
and 96kHz), Dolby Digital, and dts(-ES)
sources. If an incompatible digital audio
source (i.e. MPEG or MP3) is present,...

SETUP
JBL Synthesis
3-202-CH ANLG BYP
ON, OFF
Allows 2-channel analog audio input sources to bypass A/D
conversion and internal processing. When set to ON, the SDP-5
passes analog audio input signals to the corresponding Main Zone
audio output connectors. When a 5.1-channel analog audio source
is present, the SDP-5 passes only (L) and (R) analog audio input
signals to the Main Zone audio output connectors labeled Front
L/R. When set to OFF, all analog audio input signals are sent
through A/D conversion...