JBL Synthesis Sdp-5 Manual

Basic Operation
JBL Synthesis
2-14
Button
Main Zone
Zone 2
Shift
The numbers in the SDP-5 remote control illustration shown at the left correspond to the numbered items in the
matrix above.16
Selects the DVD1 input for
the Main Zone.Selects the DVD1 input for
Zone 2.Increases the AUDIO
CONTROLS menu BASS
parameter in 0.5dB
increments (4-2).
Selects the DVD2 input for
the Main Zone.Selects the DVD2 input for
Zone 2.Increases the AUDIO
CONTROLS menu TREBLE
parameter in 0.5dB
increments (4-2).
DVD1
Selects...

Basic Operation
SDP-5
2-15
Button
Main Zone
Zone 2
Shift
Light
Off
Zone 2
SDP-5

M
o
d
e

V
O
L
On
ListeningModes
FP
Blue
OSD
Stat
Shift
Menu 
Mute
DVD1
DVD2
Sat
VCR
TV
CD
Tu n e r
Aux
Music
TV
7/5
2 CH
1918
17
The numbers in the SDP-5 remote control illustration shown at the left correspond to the numbered items in the
matrix above.17
18
19
Selects the LOGIC7 Film
mode family for the current
input source (5-3).Reserved for future
possibilities.Selects the PANORAMA listening
mode (5-11).
Selects the...

Basic Operation
JBL Synthesis
2-16Shift-DOLBY•When the Shift command bank is activated, pressing the
remote control DOLBY button while a 5.1-channel Dolby
Digital input source is present activates the DOLBY DIGITAL EX
or DOLBY DIGITAL listening mode. Subsequent presses toggle
the EX DECODING parameter, cycling through the AUTO, ON,
and OFF settings.Shift-dts•When the Shift command bank is activated, pressing the
remote control dts button while a dts(-ES) input source is
present toggles the ES DECODING...

Basic Operation
SDP-5
2-17
Zone 2 Two-Line StatusThe Zone 2 two-line status shown at the right
indicates the current input, input source, and
volume level selected in Zone 2. It appears on 
the on-screen and front panel displays when the SDP-5 detects a
Zone 2 change.STATUS MENUSWhen the Shift command bank is activated, pressing the remote
control Stat button opens the STATUS menu for the current input
source, which contains parameters that provide information about
the current input source and listening...

Basic Operation
JBL Synthesis
2-18If the STATUS menu includes a second page, the PG1 indicator
appears in the top-right corner of the menu. While the Shift
command bank is activated, press the Stat button to open the
second page. If the STATUS menu does not include a
second page, pressing the Stat button closes the menu. If this
occurs, begin again with step 1.
3. When the desired STATUS menu page has been opened,
release the Shift button to deactivate the Shift command bank.
Then, press the remote...

Basic Operation
SDP-5
2-19
DOLBY D STATUS•Provides information about Dolby Digital input sources.
•Features L, C, R, SL, SR, and SUB level meters (2-23).Parameter Possible SettingsINPUT The selected inputMODE The activated listening modeCHANNELS 3/2.1, 3/2, 3/1, 2/2, 2/1, 2/0, 1/0BIT RATE 32 to 640kbpsEX ENCODING ON, OFFSAMPLE RATE 48kHz2.0 ENCODING MATRIX, NONEDIALOG OFFSET -27 to +4dBMIX ROOM SMALL, LARGECENTER MIX LVL -3.0dB, -4.5dB, -6.0dBSURR MIX LVL +0.0dB, -3.0dB, -6.0dBSTATUS menu parameter...

Basic Operation
JBL Synthesis
2-20dts(-ES) STATUS•Provides information about dts(-ES) input sources.
•Features L, C, R, SL, SR, SB, and SUB level meters (2-23). The
SB level meter appears when a 6.1-channel input source is
present, or when a 5.1-channel input source is present and the
ES DECODING parameter (5-30) is set to ON.Parameter Possible SettingsINPUT The selected inputMODE The activated listening modeCHANNELS 3/3.1, 3/2.1BIT RATE 754.5 to 1509.7kbpsES ENCODING DISCRETE, MATRIX, OFFWORD LENGTH...

Basic Operation
SDP-5
2-21
DIGITAL STATUS•Provides information about digital input sources for which a
sample rate is detected, but no audio is present in the input
signal.Parameter Possible SettingsINPUT The selected inputMODE The activated listening modeINPUT TYPE ---SAMPLE RATE 44.1kHz, 48kHz, 88.2kHz, 96kHzSTATUS menu parameter descriptions begin on page 2-22.
2CH BYPASS STATUS•Provides information about 2-channel analog input sources
when the MAIN ADV menu 2-CH ANLG BYP parameter is set
to...

Basic Operation
JBL Synthesis
2-22STATUS MENU PARAMETER DESCRIPTIONS
2.0 ENCODING
MATRIX, NONE
Indicates whether or not a matrix-encoded source is detected.
When the parameter setting is MATRIX, a matrix-encoded source is
detected. When the parameter setting is NONE, a matrix-encoded
source is not detected. The SDP-5 cannot automatically detect
matrix encoding in non-flagged input sources.
BIT RATE
32 to 640 kbps or 754 to 1509.7kbps
Indicates the rate at which the input signal is encoded. A higher bit...

Basic Operation
SDP-5
2-23
WORD LENGTH
16bits, 20bits, 24bits
Indicates the word length of the audio data present in the input
signal.
STATUS MENU LEVEL METERSMost STATUS menus contain level meters that indicate fluctuating
input levels in the front left (L), center (C), front right (R), surround
left (SL), surround right (SR), surround back (SB), and subwoofer
(SUB) channels. These level meters indicate input levels for both
analog and digital input sources. For instance, the level meters
indicate...