IPS 308/416 For Use With Ivt-16/16d Key Phone Users Guide

							Page 55 Tone Type Description
Clear
Forwarding
ToneThe Clear Forwarding tone is on for 1 second, off for 160 ms,
on for 80 ms, off for 160 ms, on for 80 ms, then off for 160
ms, then switching to system dial tone.  This tone is generated
when the PBX detects, through the clear forwarding detection
or polarity reversal detection, that the outside caller has hung
up.
Wait Tone The Wait tone is on for 64 ms, then off for 240 ms for as long
as a resource is unavailable.  This tone is generated when an
extension is waiting for an unavailable system resource.
Alarm Tone The Alarm tone is on for 400 ms, off for 160 ms, on for 80
ms, off for 160 ms, on for 80 ms, then off for 824 ms.  This
tone is generated when an extension answers the phone after
an alarm clock rings.
Stutter Tone The Stutter tone is on for 80 ms and off for 80 ms, lasting for
about 3 seconds.  This tone is generated when a non-key
phone extension picks up the phone while its message waiting
indicator is active.  This informs the non-key phone extension
that someone has left a message. 
						

							Page 56
Command Summary
The following table presents the commands for accessing the special features of
the IPS system.  Your System Administrator may have configured your system
to require a “*” key to be pressed before dialing sequences beginning with a ‘4’
or ‘5’ digit.
Pg# Sequence Description
56 From the Operator station only, set Night Mode.
57 From the Operator station only, set Day Mode.
27 DSS or 1 nn Place an Intercom Call to extension or to one of the Hunt
Groups.
29 3 Pick up an intercom call ringing at another extension.
35 CO 1-4 Retrieve CO calls placed on hold.
41 FWD, DSS Forward all calls from this extension to another
extension.
41 FWD Cancel the forwarding of calls from this extension.
42 43, DSS Forward all calls from another extension to this extension
(Follow Me).
42 53, DSS Cancel calls being forwarded from another extension to
this extension.  (Clear Follow Me)
43 40 nnnnnn Enter the 6-digit Call Unbarring Password.
44 59 Force this extension to use the restricted calling list.
44 50 nnnnnn The correct password ‘nnnnnn’ will cause this extension
to no longer use the restricted calling list.
46 410 Connect to the paging system.
46 411 Connect to the key phones and door phones in Pager
Group #1 and the external paging system.
46 412 Connect to the key phones and door phones in Pager
Group #2.
47 MSG, DSS Turn on the Message light / tone at another extension.
47 55, DSS Turn off the Message light / tone at another extension.
48 DND Place the phone at this extension into the Do Not Disturb
mode.
48 DND Take the phone at this extension out of the Do Not
Disturb mode.
49 45, hh, mm Set the alarm clock for ‘hh’ hours (0-23) and ‘mm’
minutes (0-59).
49 46 Cancel the alarm clock setting.
50 49 Start the Emergency Alarm signal to all extensions. 
						

							Page 57 51 MEM nn Place an outside call using one of the speed dial numbers.