Inter-Tel Imx/Gmx 256 Installation And Field Maintenance Manual

APPENDIX B - GMX STATION INSTRUMENTSIssue 1, November 1994lNTER-TELPRKTIcESIMWGMX 256 INSTALLAnON & MAINTENANCE
(6)
(7)b. Feature keys in this order: HOLD, XFR,
CNF, OUT 
@CR), ANS (AUTO), DAW,
REDL, SYS SPD, QUE, PAGE, SPKR, IC,
MUTE, FWD, DND, MSG, BGND MUSIC,
and SPCL.
c.Keypad keys in the following order: l-9, *,
0, and #.
d.Speed-dial keys inthis order: 1,6,2,7,3,8,4,
9,5, and 0.
12-Line Keysets:
a.
b.
C.
d.
e.The speed-dial keys in order: 1-8.
The call keys and station programmable keys
in order:...

INTER-TELPBACTICESWGMX 256 INSTAUATION & MAINTENANCEAPPENJMX B - GMX STATION INSTB-Issue 1, November 1994
FIGURE B-3.
GMX 24LINE KEYSET DATA PORT MODULE INSTALLATION
STRAPS -
MODULARJACK
DATA PORT
MODULE
SHORTINGPLUG 
-
LOCATION
I
Y/\
88/\
SElTlNG FOR
DATA DEVICE
PageB-7 

APPENDIX B - GMX STATION INSTRUMENTSINTER-TELPRACTICESIssue 1, November 1994IMX/GMX 256 INS~TION & MAINTENANCE
B.DSS/BLF UNIT INSTALLATION
38 Before performing the installation iustructions
outlined in this section, refer to the information begin-
ning on page 3-92.
DSWBLF Unit Self-Test
3.9
To perform the GMX DSS/BLF Unit self-test, fol-
low these instructions:
(1)
(2)
(3)
Remove the baseplate and locate the four DIP
switches on the bottom of the unit (see Figure
B-4 on the next page).NOTE: Most 
DSWBLF...

INTER-TELPRAcTxcESAPPENDIX B - GMX STATION INSTRUMEHTSIMX/GMX 256 INSTALLATION & MAINTENANCEIssue 1, November 1994
FIGURE B-4.GMX DSS/BLF UNIT BOTTOM,
NOTE: On most DSS/BLF Units, the DIP switches can be reached through the cutout in the bottom cover
(as shown above). With other units, the four screws on the bottom must be removed and the bottom cover
must be opened to access the switches.
Page B-9 

APIXNIBX B - GMX STATION INSTRUMENTSWTER-TELPRACTICESIssue 1, November 1994lMX/GMX 256 INSTALLATION & MAINTENANCE
4. FEATURES
4.1GMX keysets and SLIs have feature keys that al-low one-key dialing of feature codes. Information is
programmed in the database to determine the arrange-
ment of the feature keys and their default values. If de-
sired, some of the 
keyset feature keys can be designated
as user-programmable keys. All SLI feature keys are
user-programmable.
4.2Although their function is the same,...

lNTER-TELPBAcTIcESAPPENDIX B - GMX STATION JNSTRUMENTSIlMX/GMX 256 INSTALLATION & MAINTENANCEIssue 1, November 1994
FIGURE B-5.KEY ASSIGNMENTS (KEY)
TO USE: The following pages show the key numbering scheme and the default values of the keys on the GMX 244&e
and 12-line 
keysets. Copy the diagrams, identify the key maps, and change the names of the appropriate keys to reflect
their assignments in each 
keymap.
KEYSBT KEY MAF’ NUMBERDESCRIPTIONz
Page B-11 

APPENDIX B - GMX STATION INSTRUMENTSlNTEB-~PBAcTIcESIssue 1, November 1994llMWGMX256IN~TION 81 MAINTENANCE
FIGURE B-5.KEY ASSIGNMENTS (KEX) - Continued\?
=SET KEY MAP NUMBERDESCRIF’TION:
STmONS:
l-=--l
GMX 12-LINE KEYSET
GHIcl
4Page B-12 

INTER-TELPRACTICESINDEXIMx/GMx 256 INSTALLATION 8z MAINTENANCEIssue 1, November 1994
DEFAULT FEATURE CODES
Outside ‘Ihnk Access Codes:
Automatic Trunk Selection........................89Least-CostRouting(LCR).........................9
Select Trunk Group 147....................801-847
Extension Numbers:
Attendant......................................0SbtiOIlS.................................
loo-227Hunt Groups..............................231-250Modems:...

O+ route PUPS, 4-W S-98,sSQ, ~-ICO, s-101A
A-law/mu-law, 
2-l&2-19.4-35, S-122, S-129
Absorbed digits, 4-X,5-113AC ringing, 
2-l&2-29, d-40
Acxount code re-portq S-140
Acwlmtoodes,4-66capacity, l-8
class-of-savict, 4-28,4-66, S-56,5-67
feature code, 4-6
LcR-only. 4-33.4-66,5-32,5-54on outside call& 4-62
prognmmin& s-32.5-54SMDAreport,4-115validated, 4-66. S-32,5-33
ADMIN PEMURES key, 4-41AGC circuit, 
2-10
AIM keyset. See Inter-Tel AIM keyset
broadcast&, 5-68m=g-6-8Tl relay, 2-18
Alias& 5-133
Au-r@ hunt...

iEz!f&u~“ember 1994.-. lN7?ER-T& PRACTnxs4 /l.,,,.IIMX/GMX 256 INSTALLATION & MAINTENANCEBattery check button, 3-45
Baudrate,5-9B-Line keysets, 2-23r&d ports 5-169
S&DA output devioe, 2-32SMDR output device, 2-32
Bipolar eight zero substitution 
(B8ZS), 2-17.4-35, S-122, S-128
Bit-7 StufGng. see AlenateMark Inversion (AM-)
BFV @ilar violations) earor& 5-122
Buses See FCM highways
Busy signal, 4-54
.. ::>,:;c . .trunk& l-lA’ : h ,3, F
toB&M, 4-82,4-83G  :. ,,.‘.“C,(’i ;i-.::..4.. ‘_ .. i;, _ -.,t. _. ....