Inter-Tel Axxess System Manual Issue 4 Addendum
Here you can view all the pages of manual Inter-Tel Axxess System Manual Issue 4 Addendum. The Inter-Tel manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 61
ADDENDUM TO ISSUE 4 OF THE AXXESS MANUAL OCTOBER 1997 Page 61 of 73 Digital Keyset Layouts: 12 11 123456 78 9101112 13 14 15 16 2728 29 13 14 15 16 2728 29 EXECUTIVE KEYSETSTANDARD KEYSET 1 2 3 4 5 67 8 9 10 11 12 13 14 15 16 2728 29 BASIC KEYSET 1 2 3 45 6 2631 30 322631 30 322631 30 32 The keys are numbered to show the functions of the keys on the various maps. (Note that when a key is changed on one map, the corresponding key on any other keyset type in that map is automatically changed to match.)...
Page 62
ADDENDUM TO ISSUE 4 OF THE AXXESS MANUAL OCTOBER 1997 Page 62 of 73 Keyset Light-Emitting Diode (LED) Indications STEADY 0IPMSLOW 30 IPMMEDIUM 120 IPMFAST 240 IPMFLUTTER 60/960 IPM DATAAuto--dial modem is dialing and the data port is unavailable. (Red LED)Ring signal is being sent to the data de-- vice. (Red LED)Data call is in prog-- ress and accessible. A continuous flutter indicates that the data device is off hook. (Red LED) ICIntercom call is in progress. (Green LED*)Recalling intercom call is...
Page 63
ADDENDUM TO ISSUE 4 OF THE AXXESS MANUAL OCTOBER 1997 Page 63 of 73 ¬ NEW OPTION “Enable Database Server Compression” Preferences Flag As shown above, a new“Enable Database Server Com- pression” flag was added to the Preferences drop-down menu in the Main programming screen. When this flag is checked, database programming information going through the CPU to the AXXESSORYTalk PC will be compressed to speed up data transfers. When the system is in the default state, the databaseinformation from...
Page 64
ADDENDUM TO ISSUE 4 OF THE AXXESS MANUAL OCTOBER 1997 Page 64 of 73 ¬ NEW FLAG “Forced Delayed Major Reset” System Flag As shown above, a new“Forced Delayed Major Reset” flag was added to the System Flags screen. Normally, the system will not perform a major reset if there are any active calls. However, if this flag is en- abled, the system will force a major reset at a specified time. The time is either the default delayed major time or the user-specified delayed major time programmed in the...
Page 65
ADDENDUM TO ISSUE 4 OF THE AXXESS MANUAL OCTOBER 1997 Page 65 of 73 NEW OPTION® “CO Provides Progress Tones” T1 Programming Flag As shown above, the“CO Provides Progress Tones” flag was added to the Trunk Programming — T1 Pro- gramming screen. This flag is used for T1C and T1/PRI boards only. This flag was added because, when theAXXESS Sys- tem provides local ringback, some central offices take too long to send the AXXESS System the connect mes- sage when a call is received. (This is particularly true...
Page 66
ADDENDUM TO ISSUE 4 OF THE AXXESS MANUAL OCTOBER 1997 Page 66 of 73 Canadian Information The AXXESS System has been tested and certified for installation in Canada. Following is a list of Industry Canada regulations which are similar to the FCC regu- lations already included in the manual. INDUSTRY CANADA REGULATIONS NOTICE:The Industry Canada label identifies certi- fied equipment. This certification means that the equip- ment meets certain telecommunications network protective, operational, and safety...
Page 67
ADDENDUM TO ISSUE 4 OF THE AXXESS MANUAL OCTOBER 1997 Page 67 of 73 CHANGES AND CORRECTIONS TO THE ISSUE 4 AXXESS MANUAL Please note the following changes and corrections to Issue 4 of the manual. Various locations throughout the manual:Japanese prompts can be viewed only on“digital” display key- sets. Analog keysets do not support Japanese displays. Page xx, step 1:Add the following to the list of FCC registration numbers: BE2USA–24359–PF–E. Page xxi:The FCC chart at the top of the page should contain...
Page 68
ADDENDUM TO ISSUE 4 OF THE AXXESS MANUAL OCTOBER 1997 Page 68 of 73 Page 3–59, paragraph 8.18:The middle part of the sentence should read:...(as measured in step 6 on page 3–48, 3–51, or 3–54)... Page 3–59, paragraph 8.18, step 2:The end of the sentence should read:...(see Figure 3–30, 3–31, or 3–32 on page 3–49, 3–52, or 3–55). Page 3–75, step 11:Some keyset models (even newer ones) do not have potentiometers. Page 3–78, paragraph 9.10, step 4 and page 3–80, paragraph 9.12, step 4:Add the following note...
Page 69
ADDENDUM TO ISSUE 4 OF THE AXXESS MANUAL OCTOBER 1997 Page 69 of 73 —Intercom callerswill hear busy signals. —Callers on a trunk that does not have to be seized for AXXESS to return busy signal(such as a T1 E&M) will hear busy signals. —Callers on a trunk that has to be seized for AXXESS to return busy signal(such as a non-T1 loop-start) will hear ringing and the call will be sent to the primary attendant. Page 4–14, paragraph 6.11, second bullet:The first sentence should read as follows: Stations that...
Page 70
ADDENDUM TO ISSUE 4 OF THE AXXESS MANUAL OCTOBER 1997 Page 70 of 73 Page 4–58, paragraph 9.3, NOTE:The last sentence should read as follows: There can be up to20DSS/BLF Units in the system. Page 4–61, paragraph 12.4 and page 6–98, transfer audio flag:Remove these paragraphs. The Transfer Audio flag does not perform correctly, as described. Callers will hear music-on-hold (or silence if a music source is not available). Page 4–87 to 4–88, paragraph 24.5, Step (5):There is a cut-and-paste error in this...