HP PhotoSmart C7283 User Manual

To change the ECM setting from the control panel
1. Press  Setup.
2. Press 
 to highlight  Advanced Fax Setup , and then press OK.
The  Advanced Fax Setup  menu appears.
3. Press 
 to highlight  Error Correction Mode , and then press OK.
The  Error Correction Mode  menu appears.
4. Press 
 to highlight  Off or On.
5. Press  OK.
Receive a fax
The HP All-in-One can receive faxes automatically or manually. If you turn off the  Auto
Answer  option, you will need to receive faxes manually. If you turn on the...

To receive a fax manually
1.Make sure the HP All-in-One is turned on and you have paper loaded in the input tray.
2. Remove any originals from the document feeder tray.
3. Set the  Rings to Answer  setting to a high number to allow you to answer the incoming
call before the HP All-in-One answers. Or, turn off the  Auto Answer setting so that
the HP All-in-One does not automatically answer incoming calls.
4. If you are currently on the phone with the sender, instruct the sender to press Start
on their...

NOTE:If Backup Fax Reception  is enabled and you turn off the HP All-in-One, all
faxes stored in memory are deleted, including any unprinted faxes that you might have
received while the HP All-in-One was in an error condition. You will need to contact
the senders to ask them to resend any unprinted faxes. For a list of the faxes you
have received, print the  Fax Log. The Fax Log  is not deleted when the HP All-in-One
is turned off.
To set backup fax reception from the control panel
1. Press  Setup.
2....

To reprint all faxes in memory
▲Press 
 to highlight  All faxes in memory , and then press OK.
6. If you want to stop reprinting the faxes in memory, press  Cancel.
To delete all the faxes in me mory from the control panel
1. Press  Setup.
2. Press 
 to highlight  Tools, and then press  OK.
The  Tools  menu appears.
3. Press 
 to highlight  Clear Fax Log , and then press  OK.
NOTE: You can also delete any faxes stored in memory by turning off the HP All-in-
One. Press the  On button to turn off th e HP...

To forward faxes from the control panel
1.Press  Setup.
2. Press 
 to highlight  Advanced Fax Setup , and then press OK.
The  Advanced Fax Setup  menu appears.
3. Press 
 to highlight  Fax Forwarding , and then press OK.
The  Fax Forwarding  menu appears.
4. Press 
 until  On-Forward  or On-Print & Forward  appears, and then press  OK.
• Choose  On-Forward  if you want to forward the fax to another number without
printing a backup copy on the HP All-in-One.
NOTE: If the HP All-in-One is not able to...

from printing faxes on photo or transparency paper left in the input tray from a previous
job.
If you have plain paper loaded and the HP All-in-One is erroneously detecting your paper
as a type other than plain, you can change the Paper Checking setting, so this detection
does not take place before printing faxes.
NOTE: The HP All-in-One always checks the  paper size before printing faxes,
regardless of the  Paper Checking setting. This is to preven t ink from overprinting into
the device if a full-size...

NOTE:This feature is not supported in all countries/regions. If it is not supported in
your country/region,  Junk Fax Blocker Set Up  does not appear in the Basic Fax
Setup  menu.
Set the junk fax mode
By default,  Block Junk Fax  mode is turned On. If you do not subscribe to a caller ID
service through your phone provider, or do not want to use this feature, you can turn off
this setting.
To set the junk fax mode
1. Press  Setup.
2. Press 
 to highlight  Basic Fax Setup , and then press OK.
The  Basic...

3.Press  to highlight  Junk Fax Blocker Set Up , and then press OK.
The  Junk Fax Blocker  menu appears.
4. Press 
 to highlight  Add number to Junk List , and then press OK.
The  How to Add  menu appears.
5. Press 
 to highlight  Enter new number , and then press OK.
The  Enter Junk Number  menu appears.
6. Use the keypad to enter a fax number to block, and then press  OK.
Make sure you accurately enter the caller ID of the number you want to block. On
many junk faxes, the number that is printed in the...

use a slower fax speed. You can do this by changing the Fax Speed setting from  Fast
(33600)  (the default) to  Medium (14400) .
You should also check with your telephone company to make sure their Internet phone
service supports faxing. If they do not support faxing, you might encounter intermittent
problems when trying to send and receive faxes through the Internet.
Related topics
“
Set the fax speed” on page 30
Stop faxing
You can cancel a fax you are sending or receiving at any time.
To stop faxing...

12 Print reports and forms
The HP All-in-One enables you to print reports and to control when reports are printed
automatically. You can also print forms such as  ruled papers and checklists.
This section contains the following topics:
•
Print reports
•
Print forms
Print reports
The HP All-in-One allows you to print reports and to control when reports are printed
automatically. Use the reporting features to print self-test reports and fax reports.
NOTE: Some reports might not be available in your...