HP PhotoSmart C7283 User Manual

Solution:Check that the HP All-in-One is turned on, and then try the usb connection
again.
To retry the usb connection
1. Unplug the HP All-in-One power cord, and then plug it in again.
2. Verify that the USB cable and power cord are plugged in.
3.Click  Retry  to retry the connection. If this does not work, continue to the next step.
4. Verify that the USB cable is set up properly as follows:
• Unplug the USB cable and plug it in again or try plugging the USB cable into
a different USB port.
• Do not...

The registration screen does not appearCause: The registration screen did not launch automatically.
Solution: You can access the registration (Sign up now) screen from the Windows
taskbar by clicking  Start, pointing to  Programs or All Programs , HP , Photosmart
C7200 All-in-One series , and then clicking Product Registration .
Uninstall and reinstall the software
If your installation is incomplete, or if you connected the USB cable to the computer before
prompted by the software installation screen,...

4.Disconnect the HP All-in-One from your computer.
5. Restart your computer.
NOTE: It is important that you disconnect the HP All-in-One before restarting
your computer. Do not connect the HP All-in-One to your computer until after you
have reinstalle d the software.
6.Insert the HP All-in-One CD-ROM into your computer’s CD-ROM drive and then start
the Setup program.
7. Follow the onscreen instructions and the instructions provided in the Setup Guide that
came with the HP All-in-One.
To uninstall from a...

Solution:Turn the computer on.
Cause:The HP All-in-One is not properly connected to the computer.
Solution: Check the connection from the HP All-in-One to your computer. Verify
that the USB cable is securely plugged into the USB port on the back of the HP All-
in-One. Make sure the other end of the USB cable is plugged into a USB port on your
computer. After the cable is connected properly, turn the HP All-in-One off and then
on again.
For more information on setting up the HP All-in-One and connecting...

Solution:Check the following cables to ens ure they are connected properly.
• Cables between the HP All-in-One and the hub or router
• Cables between the hub or router and your computer
• Cables to and from your modem or HP All-in-One Internet connection (if
applicable)
Cause: Your computers Local Area  Network card (LAN card) is not set up properly.
Solution: Make sure that your LAN card is set up properly.
To check your LAN card (Windows 2000 and XP)
1. Right-click  My Computer .
2. In the  System...

Solution:Turn off the HP All-in-One, the computer, and the router. Wait 30
seconds. Turn on the router first, and then turn on the HP All-in-One and the computer.
Cause: The HP All-in-One and computer are not connected to the same network.
Solution: Try accessing the Embedded Web Server on the HP All-in-One. To find
the IP address, print a network configuration page.
Related topics
•“
View and print network settings” on page 49
•“
Use the Embedded Web Server” on page 52
The Printer not Found screen...

software. You can re-enable your firewall application after installation is complete. If
you still see firewall pop-up messages, you must always accept or allow the pop-up
messages.
For more information, see the documentation provided with the firewall software.
Cause:A Virtual Private Network (VPN) is preventing the HP All-in-One from
accessing your computer.
Solution: Try temporarily disabling the VPN before proceeding with the installation.
NOTE:The HP All-in-One is not accessible  during VPN...

bit. Assuming the equipment is functioning properly, try doing the following things
separately or in combination:
•If there is a long distance between your computer or wireless router and the
HP All-in-One, move them closer together.
• If there are metal objects (such as a metal bookcase or refrigerator) in the
transmission path, clear the path between the HP All-in-One and the computer or
wireless router.
• If a cordless telephone, microwave, or other device that emits radio signals
transmitting at 2.4...

on how to turn on the wireless router, see the documentation that came with your
wireless router.
Cause:The HP All-in-One is not receiving a signal.
Solution: Move the wireless router and the HP All-in-One closer together. Then run
the wireless setup again.
For more information, see:
“
Integrated wireless WLAN 802.11 network setup” on page 39
Cause: If you manually entered your network name (SSID), you might have entered
it incorrectly.
Solution: Run the wireless setup process again and enter your...

Solution:Run the wireless setup process again and enter the correct passphrase.
The passphrase is  case-sensitive.
The Printer Not Found screen appears during installation
Cause: A firewall, anti-virus, or anti-spyware application is preventing the HP All-
in-One from accessing your computer.
Solution: Uninstall the HP All-in-One software, and then reboot your computer.
Temporarily disable anti-virus or anti-spyware applications, and then reinstall the
HP All-in-One software. You can re-enable your...