HP Pavilion Dv6100 Entertainment Notebook Pc Series Service Guide

							Removal and Replacement Procedures
Maintenance and Service Guide 5–35
6. Turn the comuter display-side up with the front toward you.
7. Open the computer to an upright position.
8. Disconnect the following cables:
1 Display cable
2 Microphone cable
3 Camera cable
9. Remove the wireless antenna cables 4 from the routing 
channels in the top cover.
Disconnecting the Display Cables 
						

							5–36 Maintenance and Service Guide
Removal and Replacement Procedures
ÄCAUTION: Support the display assembly when removing the following 
screws. Failure to support the display assembly can result in damage to 
the display assembly and other computer components.
10. Remove the two Phillips PM2.5×7.0 screws 1 that secure the 
display assembly to the computer.
11. Remove the display assembly 2.
Removing the Display Assembly 
						

							Removal and Replacement Procedures
Maintenance and Service Guide 5–37
12. Remove the following:
1 Four rubber screw covers on the display bezel top edge
2 Two rubber screw covers on the display bezel bottom edge
3 Four Phillips PM2.5×5.0 screws on the display bezel 
top edge
4 Two Phillips PM2.5×7.0 screws on the display bezel 
bottom edge
✎The display rubber screw covers are included in the Display 
Screw Kit, spare part number 431399-001.
Removing the Display Bezel Screws 
						

							5–38 Maintenance and Service Guide
Removal and Replacement Procedures
13. Flex the inside edges of the left and right sides 1 and the 
top and bottom sides 2 of the display bezel until the bezel 
disengages from the display enclosure.
14. Remove the display bezel 3.
Removing the Display Bezel
Display Assembly Subcomponents
Spare Part Number Information
Display bezels
For use only with full-featured computer models with camera 
sold at Best Buy (includes camera and microphone openings)
For use with full-featured computer models with camera 
(includes camera and microphone openings)
For use with full-featured computer models without camera 
(includes microphone openings)
For use with defeatured computer models436260-001
431388-001
433281-001
433282-001 
						

							Removal and Replacement Procedures
Maintenance and Service Guide 5–39
15. Remove the camera module 1 from the display enclosure.
16. Disconnect the camera cable 2 from the camera module.
Removing the Camera Module
Display Assembly Subcomponents
Spare Part Number Information
Camera module 431392-001 
						

							5–40 Maintenance and Service Guide
Removal and Replacement Procedures
17. Remove the inverter 1 from the display enclosure.
18. Disconnect the display cable 2 and the backlight cable 3 
from the display inverter.
Removing the Display Inverter
Display Assembly Subcomponents
Spare Part Number Information
Display inverter 431391-001 
						

							Removal and Replacement Procedures
Maintenance and Service Guide 5–41
19. Remove the four Phillips PM2.5×5.0 screws 1 that secure the 
display panel to the display enclosure.
20. Remove the display panel 2.
Removing the Display Panel
Display Assembly Subcomponents
Spare Part Number Information
Display panels
15.4-inch, WXGA, SVA display panel with BrightView
15.4-inch, WXGA, SVA display panel AntiGlare431386-001
431387-001 
						

							5–42 Maintenance and Service Guide
Removal and Replacement Procedures
21. Slide the left and right display hinge covers 1 off of the 
display hinges.
22. Remove the two Phillips PM2.0×3.0 screws 2 that secure 
each hinge to the display enclosure.
23. Remove the display hinges 3.
Removing the Display Hinges
Display Assembly Subcomponents
Spare Part Number Information
Display Hinge Kit 431395-001
Display hinge covers (not illustrated)
For use only with full-featured computer models sold at 
Best Buy
For use with full-featured computer models
For use with defeatured computer models436262-001
431396-001
433289-001 
						

							Removal and Replacement Procedures
Maintenance and Service Guide 5–43
24. If it is necessary to replace the wireless antenna transceivers 
and cables, remove the Phillips PM2.0×4.0 screw 1 that 
secures each transceiver to the display enclosure.
25. Remove the wireless antenna cables from the clips 2 built 
into the display enclosure.
26. Detach the wireless antenna transceivers 3 from the 
display enclosure.
27. Remove the wireless antenna cables 4.
Removing the Wireless Antenna Transceivers and Cables
Display Assembly Subcomponents
Spare Part Number Information
Wireless antenna transceivers and cables 431398-001 
						

							5–44 Maintenance and Service Guide
Removal and Replacement Procedures
28. If it is necessary to replace the microphones and cables, 
release the retention tabs 1 built into the display enclosure 
that secure the microphone cables to the display enclosure.
29. Remove the microphone receivers 2 from the clips in the 
display enclosure.
30. Remove the microphone cables 3 from the display enclosure.
Removing the Microphones
Display Assembly Subcomponents
Spare Part Number Information
Microphone 431393-001