HP Pavilion Dv6100 Entertainment Notebook Pc Series Service Guide

							Removal and Replacement Procedures
Maintenance and Service Guide 5–25
8. Release the zero insertion force (ZIF) connector 1 to which 
the LED board cable is connected and disconnect the cable2 
from the LED board.
9. Remove the switch cover.
Disconnecting the LED Board Cable
Reverse the above procedure to install the switch cover. 
						

							5–26 Maintenance and Service Guide
Removal and Replacement Procedures
5.11 Keyboard
1. Prepare the computer for disassembly (Section 5.3).
2. Remove the switch cover (Section 5.10).
Keyboard Spare Part Number Information
For use with all computer models in the following countries or regions:
Belgium
The Czech Republic
France
French Canada
Germany
Greece
The Netherlands 
and Europe
Israel441427-A41
441427-221
441427-051
441427-121
441427-041
441427-151
441427-B31
441427-BB1Italy
Portugal
Russia
Saudi Arabia
Spain
Switzerland
Tu r k e y
The United Kingdom
The United States441427-061
441427-131
441427-251
441427-171
441427-071
441427-111
441427-141
441427-031
441427-001
For use only with computer models using Intel processors in the following 
countries or regions:
Japan
Korea
Po la nd441427-291
441427-AD1
441427-241Ta i w a n
Thailand441427-AB1
441427-291
For use only with computer models using AMD processors in the following 
countries or regions:
Denmark, Finland, 
Norway, and 
Sweden441427-DH1 Latin America 441427-161 
						

							Removal and Replacement Procedures
Maintenance and Service Guide 5–27
3. Remove the four Phillips PM2.5×7.0 screws that secure the 
keyboard to the computer.
Removing the Keyboard Screws 
						

							5–28 Maintenance and Service Guide
Removal and Replacement Procedures
4. Turn the computer display-side up with the front panel 
toward you.
5. Open the computer as far as possible.
6. Lift the rear edge of the keyboard 1 until it rests at an angle.
7. Slide the keyboard 2 back to disengage the tabs on the front 
edge of the keyboard from the top cover.
8. Swing the keyboard 3 forward until it rests on the palm rest.
Releasing the Keyboard 
						

							Removal and Replacement Procedures
Maintenance and Service Guide 5–29
9. Release the ZIF connector 1 to which the keyboard cable is 
connected and disconnect the keyboard cable 2 from the 
system board.
Disconnecting the Keyboard Cable
10. Remove the keyboard.
Reverse the above procedure to install the keyboard. 
						

							5–30 Maintenance and Service Guide
Removal and Replacement Procedures
5.12 Speaker Assembly
1. Prepare the computer for disassembly (Section 5.3).
2. Remove the switch cover (Section 5.10).
3. Remove the keyboard (Section 5.11).
4. Disconnect the speaker assembly cable 1 from the power 
button board.
5. Remove the two Phillips PM2.5×4.0 screws 2 that secure the 
speaker assembly to the computer.
6. Remove the speaker assembly 3.
Removing the Speaker Assembly
Reverse the above procedure to install the speaker assembly.
Speaker Assembly Spare Part Number Information
Speaker assembly 431447-001 
						

							Removal and Replacement Procedures
Maintenance and Service Guide 5–31
5.13 Power Button Board
1. Prepare the computer for disassembly (Section 5.3).
2. Remove the switch cover (Section 5.10).
3. Remove the keyboard (Section 5.11).
4. Disconnect the microphone cable 1 and the speaker 
assembly cable 2 from the power button board.
5. Release the ZIF connector 3 to which the power button board 
is connected and disconnect the cable 4.
6. Remove the power button board cable from the clip 5 in the 
top cover.
Disconnecting the Power Button Board Cables
Power Button Board Spare Part Number Information
Power button board (includes power button board cable) 431437-001 
						

							5–32 Maintenance and Service Guide
Removal and Replacement Procedures
7. Remove the two Phillips PM2.0×3.0 screws 1 that secure the 
power button board to the computer.
8. Remove the power button board 2.
Removing the Power Button Board
Reverse the above procedure to install the power button board. 
						

							Removal and Replacement Procedures
Maintenance and Service Guide 5–33
5.14 Display Assembly
1. Prepare the computer for disassembly (Section 5.3) and 
remove the following components:
❏Memory module compartment cover (Section 5.8)
❏Switch cover (Section 5.10)
❏Keyboard (Section 5.11)
❏Speaker assembly (Section 5.12)
Display Assembly Spare Part Number Information
For use with full-featured computer models with camera (includes camera, 
camera cable, and microphones)
15.4-inch, WXGA, TFT with BrightView for use only with 
computer models sold at Best Buy
15.4-inch, WXGA, TFT Antiglare for use only with computer 
models sold at Best Buy436258-001
436259-001
15.4-inch, WXGA, TFT with BrightView
15.4-inch, WXGA, TFT Antiglare432298-001
431380-001
For use with full-featured computer models without camera 
(includes microphones)
15.4-inch, WXGA, TFT with BrightView
15.4-inch, WXGA, TFT Antiglare432299-001
432301-001
For use with defeatured computer models (does not include camera, 
camera cable, or microphones)
15.4-inch, WXGA, TFT with BrightView
15.4-inch, WXGA, TFT Antiglare432296-001
432297-001 
						

							5–34 Maintenance and Service Guide
Removal and Replacement Procedures
2. Close the computer.
3. Turn the computer upside down with the rear panel 
toward you.
4. Make note of which wireless antenna cable is attached to 
which antenna clip on the Mini Card module before 
disconnecting the cables. Then disconnect the cables 1 from 
the module.
5. Remove the two Phillips PM2.5×7.0 screws 2 that secure the 
display assembly to the computer.
Removing the Display Assembly Screws