HP Officejet Pro 8000 User Manual

Prepare the device for shipment
If after contacting HP Customer Support or returning to the point of purchase, you are requested
to send the device in for service, make sure you remove and keep the following items before
returning your device:
• The ink cartridges and printheads
• The power cord, USB cable, and any other cable connected to the device
• Any paper loaded in the input tray
• Remove any originals you might have loaded in the device
This section contains the following topics:
•
Remove the ink...

To remove printheads before shipment
1.Open the top cover.
2.
If the print carriage does not move to the left automatically, press and hold the 
 Resume
button until the carriage moves to the left. Wait for the print carriage to stop moving, and then
unplug the power cord from the printer.
NOTE:If the printer cannot be powered on, use a pen to remove the printhead cover.
3.Lift the printhead latch.
4.Lift the handle of a printhead, and use it to pull the printhead out of its slot.
Appendix B
108
Support...

5.Place the printheads in an airtight plastic container--nozzles facing up and not touching each
other or the container--so they will not dry out, and put them aside. Do not send them with the
device unless the HP customer support call agent instructs you to.
6.Close the top cover.
NOTE:If you have opened the printhead cover, use your thumb to press the catch, and
reinsert the printhead cover.
7.After the printer is idle and the print carriage has returned to its parked position, press the
Power button...

If you do not have the original packaging materials, please use other adequate packaging
materials. Shipping damage caused by improper packaging and/or improper transportation is
not covered under the warranty.
2.Place the return shipping label on the outside of the box.
3.Include the following items in the box:
• A complete description of symptoms for service personnel (samples of print quality
problems are helpful).
• A copy of the sales slip or other proof of purchase to establish the warranty...

C
Device specifications
For media and media-handling specifications, see Understand specifications for supported media.
•
Physical specifications
•
Product features and capacities
•
Processor and memory specifications
•
System requirements
•
Network protocol specifications
•
Embedded Web server specifications
•
Print resolution
•
Environmental specifications
•
Electrical specifications
•
Acoustic emission specifications (print in Draft mode, noise levels per ISO 7779)
Physical specifications
Size (width...

Product features and capacities
FeatureCapacity
Connectivity•
USB 2.0-compliant high speed
• Fast Ethernet 10/100Base-TX for wired
network connection (some models only)
• Wireless 802.11b/g (some models only)
Print methodDrop-on-demand thermal inkjet printing
Ink cartridgesFour ink cartridges (one each for black, cyan,
magenta, and yellow)
PrintheadsTwo printheads (one black and yellow, and
one magenta and cyan)
Supply yieldsVisit www.hp.com/go/learnaboutsupplies/ for
more information on estimated ink...

Minimum requirements
• Microsoft Windows® 2000 Service Pack 4: Intel® Pentium II or Celeron® processor, 128 MB
RAM, 160 MB free hard disk space, Microsoft Internet Explorer 6.0
• Microsoft Windows XP (32-bit) Service Pack 1: Intel Pentium II or Celeron processor, 512 MB
RAM, 225 MB free hard disk space, Microsoft Internet Explorer 6.0
• Microsoft® Windows x64 Service Pack 1: AMD Athlon 64 or AMD Opteron processor, Intel
Xeon or Pentium processor with Intel EM64T support, 512MB RAM, 160 MB free hard disk...

Network management
Embedded Web server
Features
◦Ability to remotely configure and manage network devices
◦myPrintMileage
Embedded Web server specifications
Requirements
• A TCP/IP-based network (IPX/SPX-based networks are not supported)
• A Web browser (either Microsoft Internet Explorer 6.0 or higher, Mozilla Firefox 1.0 or higher,
Opera 8.0 or higher, or Safari 1.2, or higher)
• A network connection (you cannot use the embedded Web server connected directly to a
computer with a USB cable)
• An...

Acoustic emission specifications (print in Draft mode, noise levels
per ISO 7779)
Sound pressure (bystander position)
LpAd 54 (dBA)
Sound power
LwAd 6.7 (BA)
Acoustic emission specifications (print in Draft mode, noise levels per ISO 7779)115
 

D Regulatory information
This section contains the following topics:
•
FCC statement
•
Notice to users in Korea
•
VCCI (Class B) compliance statement for users in Japan
•
Notice to users in Japan about the power cord
•
Toxic and hazardous substance table
•
Regulatory information for wireless products
•
Regulatory model number
•
Declaration of conformity
•
Environmental product stewardship program
•
Third-party licenses
FCC statement
FCC statement
The United States Federal Communications Commission (in 47...