HP LaserJet P2055dn User Manual

Change printer-driver settings for Macintosh
Change the settings for all print jobs
until the software program is closedChange the default settings for all
print jobsChange the product configuration
settings
1.On the File  menu, click  Print.
2. Change the settings that you want
on the various menus. 1.
On the  File menu, click  Print.
2. Change the settings that you want
on the various menus.
3. On the  Presets  menu, click  Save
as and type a name for the preset.
These settings are saved in the
Presets...

Use features in the Macintosh printer driver
Print
Create and use printing presets in Macintosh
Use printing presets to save the current printer driver settings for reuse.
Create a printing preset 1.On the File  menu, click  Print.
2. Select the driver.
3. Select the print settings.
4. In the  Presets  box, click  Save As..., and type a name for the preset.
5. Click  OK.
Use printing presets 1.On the File  menu, click  Print.
2. Select the driver.
3. In the  Presets  box, select the printing preset that...

Use watermarks
A watermark is a notice, such as “Confidential,” that is printed in the background of each page of a
document.
1.On the File  menu, click  Print.
2. Open the  Watermarks  menu.
3. Next to  Mode, select the type of watermark to use. Select  Watermark to print a semi-transparent
message. Select  Overlay to print a message that is not transparent.
4. Next to  Pages, select whether to print the watermark on all pages or on the first page only.
5. Next to Text , select one of the standard...

Print on both sides of the page
Use automatic two-sided printing (duplex models only)1.Set the product for the correct width of paper that you are using. At the back of the product, lift the
duplex jam-release door, and locate the blue paper-width selection lever.
●Letter and Legal-size paper
: Push the lever in.
● A4-size paper
: Pull the lever out.
2.Insert enough paper into one of the trays to accommodate the print job. If you are loading special
paper such as letterhead, load it in one of the...

Use the Services menu
If the product is connected to a network, use the Services menu to obtain product and supply-status
information.
1. On the File  menu, click  Print.
2. Open the  Services menu.
3. To open the embedded Web server and perform a maintenance task, do the following:
a.Select  Device Maintenance .
b. Select a task from the drop-down list.
c. Click  Launch .
4. To go to various support Web sites for this device, do the following:
a.Select  Services on the Web .
b. Select  Internet Services...

34 Chapter 4   Use the product with MacintoshENWW
 

5 Connectivity
●USB configuration
●
Network configuration
ENWW 35
 

USB configuration
The product has a Hi-Speed USB 2.0 port. The USB cable can be a maximum of 2 meters (6 feet) long.
Connect the USB cable
Plug the USB cable into the product. Plug the other end of the USB cable into the computer.
1Type B USB port
2Type B USB connector
36 Chapter 5   ConnectivityENWW
 

Network configuration
You might need to configure certain network parameters on the product. You can configure these
parameters from the control panel, the embedded Web server, or for most networks, from the HP Web
Jetadmin software.
Supported network protocols
The product supports the TCP/IP network protocol. It is the most widely used and accepted networking
protocol. Many networking services utilize this protocol. This product also supports IPv4 and IPv6. The
following tables list the networking...

Service nameDescription
SNMP (simple network management protocol)Used by network programs for product management. SNMP
V3 and standard MIB-II (Management Information Base)
objects are supported.
Web Jetadmin (WJA)Management application that provides controlled access to
HP Jetdirect and printer features.
EPCHP Easy Printer Care Software 2.0 (EPC 2.0) provides
HP Web Jetadmin-type functions for small and micro
businesses with up to 15 HP LaserJet products. EPC 2.0
delivers effortless laser printer upkeep...