HP LaserJet P2055dn User Manual

2 Control panel
●Control-panel layout
●
Use the control-panel menus
●
Reports menu
●
System setup menu
●
Service menu
●
Network config. menu
ENWW 9
 

Control-panel layout
Use the control panel to obtain product and job status information and to configure the product.
OK
1
7
6
5
4
3
2
8
NumberButton or lightFunction
1Control-panel displayShows status information, menus, and error messages
2 Up arrowNavigates to the next submenu or the next value in a menu selection list, moves
the cursor forward a single position, or increases the value of numeric items
3OK button● Saves the selected value for an item
● Performs the action that is associated with the...

Use the control-panel menus
To gain access to the control-panel menus, complete the steps below.
Use the menus
1.Press  OK.
2. Press the down arrow 
 or the up arrow  to navigate the listings.
3. Press  OK to select the appropriate option.
4. Press the back button 
 to return to the previous level.
The following are the main menus.
Main menus Reports
System setup
Service
Network config.
ENWW Use the control-panel menus 11
 

Reports menu
Use the Reports  menu to print reports that provide information about the product.
Menu itemDescription
Demo pagePrints a page that demonstrates print quality.
Menu structurePrints a map of the control-panel-menu layout. The active settings for each menu
are listed.
Config reportPrints a list of all the product settings. Includes network information when the product
is connected to a network.
Supplies statusPrints the status for the print cartridge, including the following information:...

System setup menu
Use this menu to establish basic product settings. The System setup menu has several sub-menus.
Each is described in the following table.
Menu itemSub-menu itemSub-menu itemDescription
Language  Select the language for the control-panel
display messages and the product reports.
Quiet mode On
OffEnable or disable quiet mode. When quiet
mode is turned on, the product prints at a
slower speed.
The default setting is Off .
Paper setupDef. paper sizeA list of available paper sizes...

Menu itemSub-menu itemSub-menu itemDescription
Courier fontRegular
Dark Select a version of the Courier font.
The default is Regular.
Display contrast Medium
Darker
Darkest
Lightest
Lighter  
Adjust the contrast of the LCD.
14 Chapter 2   Control panel ENWW
 

Service menu
Use this menu to restore default settings, clean the product, and activate special modes that affect print
output.
Menu itemDescription
Cleaning modeUse this option to clean the product if you see toner specks or other marks on the
printed output. The cleaning process removes dust and excess toner from the paper
path.
When you select this item, the product prompts you to load plain paper in Tray 1 and
then press OK to start the cleaning process. Wait until the process is complete.
Discard...

Network config. menu
Use this menu to establish network configuration settings.
Menu itemDescription
CFG TCP/IPAccess the TCP/IP menu and set TCP/IP protocol parameters.
●BOOTP=YES*
 Enable IPv4 configuration by a BOOTP Server.
● DHCP=YES*
 Enable IPv4 configuration by a DHCP Server.
If DHCP=YES*  and the print server has a DHCP lease,  you can configure the following DHCP
settings:
● RELEASE
: Select whether to release ( YES) or save (NO) the current lease.
● RENEW
: Select whether to renew ( YES or NO)...

Menu itemDescription
WEBEmbedded Web server accepts communications using HTTPS (Secure HTTP) only, or both HTTP
and HTTPS.
●HTTPS
: Accept only HTTPS (print server appears as a secure site).
● HTTP/HTTPS: Accept either HTTP or HTTPS.
SECURITYReset current security settings to factory defaults.
●
KEEP
 (default): Retain current security settings.
● RESET
: Reset security settings to factory defaults.
FIREWALLDisable Firewall.
●KEEP
 (default): Retain Firewall operation as configured.
● DISABLE
: Disable...

18 Chapter 2   Control panelENWW