HP LaserJet P1102w User Manual

7 Manage and maintain the product
●Print the information pages
●
Use the HP Embedded Web Server (wireless models only)
●
Economy settings
●
Manage supplies and accessories
●
Clean the product
●
Product updates
ENWW 47 

Print the information pages
You can print the following information pages.
Configuration page
The configuration page lists current product settings and properties. It also contains a status log report. To
print a configuration page, do the following:
1. Open the printer driver , and then click the Properties  or Preferences button.
2. Click the Services  tab, and then, in the  Print Information Pages  drop-down list, click the  Config Page
list item.
3. Click the Print  button.
On wireless models, you...

Use the HP Embedded Web Server (wireless models only)
Use the HP Embedded Web Server (EWS) to view product and network status and to manage printing
functions from a computer.
●View product status information
● Determine the remaining life on all supplies and order new ones
● View and change the product default configuration settings
● View and change network configuration
You do not need to install any software on the computer. You only need to use one of these supported Web
browsers:
● Internet...

Settings tab
Use this tab to configure the product from your computer. If this product is networked, always consult with
the product administrator before changing settings on this tab.
The  Settings  tab contains the  Printing page where you can view and change the default print job settings.
Networking tab
Network administrators can use this tab to control  network-related settings for the product when it is
connected to an IP-based network.
Links
Links are located in the upper-right part of the status...

Economy settings
Auto-Off mode
Auto-Off is an energy-saving feature of this product. After a user-specified time period, the product
automatically reduces its power consumption (Auto-Of f). The product returns to the ready state when a
button is pressed or a print job is received. When the  product is in Auto-Off mode, all of the control-panel
LEDs and the power butto n backlight LED are off.
NOTE: Although the product ligh ts are off in Auto-Off mode, the product will work normally when it
receives a...

Manage supplies and accessories
Correctly using, storing, and monitoring the print cartridge can help ensure high-quality print output.
Check and order supplies
Print-cartridge storage
Do not remove the print cartridge from its package until you are ready to use it.
CAUTION:To prevent damage to the print ca rtridge, do not expose it to light for more than a few minutes.
HP Policy on non-HP print cartridges
HP Company cannot recommend the use of non-HP print cartridges, either new or remanufactured....

Replacement instructions
Redistribute toner
When a small amount of toner remains in print cartridge, faded or light areas might appear on the printed
page. You might be able to te mporarily improve print quality by redistributing the toner.
1. Open the print-cartridge door, and  then remove the print cartridge.
2.To redistribute the toner, gently rock the print cartridge from front to back.
CAUTION: If toner gets on your clothing, wipe it off  with a dry cloth and wash the clothing in cold
water.  Hot...

3.Reinsert the print cartridge in to the product, and then close the print-cartridge door.
If the print is still light, install a new print cartridge.
Replace the print cartridge
When a print cartridge approaches the end of useful life, you can continue printing with the current cartridge
until redistributing the toner no longer yields acceptable print quality.
1.Open the print-cartridge door, and th en remove the old print cartridge.
54 Chapter 7   Manage and maintain the product ENWW 

2.Remove the new print cartridge from the packaging. Place the used print cartridge in the bag and box
for recycling.
CAUTION: To prevent damage to the print cartridge, hold the print cartridge at each end. Do not touch
the cartridge shutter or the roller surface.
3. Grasp both sides of the print cartridge and gently rock the print cartridge to distribute the toner evenly
inside the cartridge.
ENWW Manage supplies and accessories 55 

4.Bend the tab on the left side of the cartridge until the tab breaks loose, and then pull the tab until all the
tape is removed from the cartridge. Place the tab  and tape in the print-cartridge box to return for
recycling.
5. Insert the print cartridge in the product,  and then close the print-cartridge door.
CAUTION:If toner gets on your clothing, wipe it off  with a dry cloth and wash the clothing in cold
water.  Hot water sets toner into the fabric .
56 Chapter 7   Manage and maintain the product ENWW