HP LaserJet P1102w User Manual

Change printer-driver settings for Macintosh
Change the settings for all print jobs
until the software program is closedChange the default settings for all print
jobsChange the product configuration
settings
1. On the File  menu, click  Print.
2. Change the settings that you want on
the various menus. 1.
On the  File menu, click  Print.
2. Change the settings that you want on
the various menus.
3. On the  Presets  menu, click  Save as
and type a name for the preset.
These settings are saved in the...

Software for Mac computers
HP Printer Utility for Mac
Use the HP LaserJet Utility to print the product information pages and to change the Auto-Off setting from a
Mac computer.
To open the HP LaserJet Utility, complete the procedure below.
▲Open the Print Queue, and then click the  Utility icon.
Install software for Mac computers on a wireless network
Before installing the product software, make sure  the product is not connected to the network using a
network cable.
NOTE: You must have Mac OS X V10.6 to...

The embedded Web server provides an interface to the device that anyone who has a network-connected
computer and a standard Web browser can use. No special software is installed or configured, but you must
have a supported Web browser on your computer. To gain access to the embedded Web server, type the IP
address for the device in the address line of the browser.  (To find the IP address, print a configuration page.)
ENWW Software for Mac 19 

Print with Mac
Create and use printing presets in Macintosh
Use printing presets to save the current printer driver settings for reuse.
Create a printing preset 1.On the  File menu, click Print .
2. Select the driver.
3. Select the print settings.
4. In the  Presets  box, click  Save As..., and type a name for the preset.
5. Click OK.
Use printing presets 1.On the  File menu, click Print .
2. Select the driver.
3. In the  Presets  box, select the printing preset that you want to use.
NOTE: To use...

Print multiple pages on one sheet of paper in Macintosh
You can print more than one page on a single sheet of paper. This feature provides a cost-effective way to
print draft pages.
1.On the  File menu, click  Print.
2. Select the driver.
3. Open the  Layout menu.
4. Next to Pages per Sheet , select the number of pages that you want to print on each sheet (1, 2, 4, 6, 9,
or 16).
5. Next to Layout Direction , select the order and placement of the pages on the sheet.
6. Next to Borders , select the type of...

22 Chapter 3   Use the product with MacENWW 

4 Connect the product
●Supported network operating systems (wireless models only)
●
USB connection
●
Network connection (wireless models only)
ENWW 23 

Supported network operating systems (wireless models only)
The product supports the following operating systems for wireless printing:
●
Windows Vista (32-bit and 64-bit)
● Windows XP (32-bit and 64-bit)
● Windows 7
● Windows Server 2003 (32-bit and 64-bit)
● Windows Server 2008 (32-bit and 64-bit)
● Mac OS X v10.4, v10.5, and v10.6
24 Chapter 4   Connect the product ENWW 

USB connection
This product supports a Hi-Speed USB 2.0 connection. You must use an A-to-B type USB cable that is no
longer than 2 m (6.56 ft).
CD installation
1. Insert the software installation CD into the computer CD drive.
NOTE: Do not connect the USB cable until prompted.
2.If the installation program does not start automatically, browse the CD contents and run the SETUP.EXE
file.
3. Follow the onscreen instructions to install the software.
When you use the CD to install the software, you can choose...

Network connection (wireless models only)
The product can connect to wireless networks.
Supported network protocols
To connect a networking-equipped product to a network,  you need a network that uses one of the following
protocols.
● TCP/IP (IPv4 or IPv6)
● Port 9100
● LPR
● DHCP
● AutoIP
● SNMP
● Bonjour
● SLP
● WSD
● NBNS
Install the product on a wireless network with the software CD
1.Insert the software CD into the computer CD tray.
If the installation program does not start automatically, browse...