HP LaserJet M4345 User Manual

							Table C-3  Power requirements for the HP LaserJet M4345 Series MFP
Specification110-volt models230-volt models
Power requirements110to127volts (10%)
50/60Hz (2Hz)220to240volts (10%)
50/60Hz (2Hz)
Rated current 10.0Amps 4.5Amps
Table C-4  Power consumption for the HP LaserJet M4345 Series MFP (average, in watts)1
Product modelCopyingPrinting2ReadySleepOff
HPLaserJet M4345 MFP800W790W344W15W0.25W
HPLaserJet M4345x MFP800W790W349W15W0.25W
HPLaserJet M4345xs MFP800W790W349W15W0.25W
HPLaserJet M4345xm MFP800W790W349W15W0.25W
1Values subject to change. See http://www.hp.com/support/ljm4345mfp  for current information.2Power numbers are the highest values  measured using all standard voltages.3HPLaserJet M4345 Series MFP printing and copying speeds  are 45ppm Letter size and 43ppm A4 size.4Default time from Ready mode to Sleep = 60minutes.5Recovery time from Sleep to start of printing = less than 10seconds.6Heat dissipation in Ready mode = 167BTU/hour.
Acoustic specifications
Table C-5  Sound power and pressure level for the HP LaserJet M4345 Series MFP1
Sound power levelDeclared per ISO 9296
Printing2LWAd= 7.0Bels (A) [70dB(A)]
CopyingLWAd= 7.2Bels (A) [72dB(A)]
ReadyLpAm=33dB (A)
Sound pressure levelDeclared per ISO 9296
Printing2LpAm=55dB (A)
CopyingLpAm=56dB (A)
ReadyLpAm=33dB (A)
1Values subject to change. See http://www.hp.com/support/ljm4345mfp  for current information.2HPLaserJet M4345 Series MFP speed is 43ppm A4 size.3Configuration tested (HPLaserJet M4345 MFP): Base model, simplex printing with A4 paper size.
ENWW Acoustic specifications 249
 
						

							Operating environment
Table C-6  Necessary conditions
Environmental condition PrintingStorage/standby
Temperature (printer and print cartridge)15to32.5C (59to89F)-20to40C (-4to104F)
Relative humidity 10%to80% 10%to90%
250 Appendix C   Specifications ENWW
 
						

							D Regulatory information
This section contains the following regulatory information:
●
FCC regulations
●
Environmental product stewardship program
●
Telecom statement
●
Declaration of conformity
●
Safety statements
ENWW 251
 
						

							FCC regulations
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules.  These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy. If this equipment is not installed and used in accordance with the
instructions, it may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try  to correct the interference by one or more of the
following measures:
● Reorient or relocate the receiving antenna.
● Increase separation between equipment and receiver.
● Connect equipment to an outlet on a circuit different from that to which the receiver is located.
● Consult your dealer or an experienced radio/TV technician.
NOTE
Any changes or modifications to the printer  that are not expressly approved by HP
could void the user’s authority to operate this equipment.
Use of a shielded interface cable is required to comply with the Class B limits of Part 15 of
FCC rules.
252 Appendix D   Regulatory information ENWW
 
						

							Environmental product stewardship program
Protecting the environment
Hewlett-Packard Company is committed to providing quality products in an environmentally sound
manner. This product has been designed with several attributes to minimize impacts on our
environment.
Ozone production
This product generates no appreciable ozone gas (O3).
Power consumption
Power usage drops significantly while in Ready and Sleep modes, which saves natural resources
and saves money without affecting the high performance of this product. This product qualifies for
ENERGY STAR® (Version 3.0), which is a voluntary program to encourage the development of
energy-efficient office products.
ENERGY STAR® and the ENERGY STAR mark are U.S. registered marks. As an ENERGY STAR
partner, Hewlett-Packard Company has determined that this product meets ENERGY STAR
Guidelines for energy efficiency. For more information, see 
www.energystar.gov.
Toner consumption
Economode uses significantly less toner, which might  extend the life of the print cartridge.
Paper use
This product’s manual/optional automatic duplex feature (two-sided printing, see Use automatic
duplex printing (Windows) or Use automatic duplex printing (Mac)) and N-up printing (multiple pages
printed on one page) capability can reduce paper usage and the resulting demands on natural
resources.
Plastics
Plastic parts over 25 grams are marked according to international standards that enhance the ability
to identify plastics for recycling purposes at the end of the product’s life.
ENWW Environmental product stewardship program 253
 
						

							HP LaserJet print supplies
It’s easy to return and recycle your empty HP LaserJet print cartridges—free of\
 charge—with
HP Planet Partners. HP is committed to providing inventive, high-quality products and services that
are environmentally sound, from product design and manufacturing to distribution, operation and
recycling processes. We ensure your returned HP LaserJet print cartridges are recycled properly,
processing them to recover valuable plastics and metals for new products and diverting millions of
tons of waste from landfills. Since this cartridge is being recycled and used in new materials, it will
not be returned to you. Your empty HP LaserJet print cartridges are recycled responsibly when you
participate in the HP Planet Partners program.  Thank you for being environmentally responsible!
In many countries/regions, this product’s printing supplies (for example, print cartridges) can be
returned to HP through the HP Printing Supplies Returns and Recycling Program. An easy-to-use
and free take back program is available in more than 35 countries/regions. Multilingual program
information and instructions are included in every new HP LaserJet print cartridge and supplies
package.
HP print supplies returns and recycling program information
Since 1992, HP has offered HP LaserJet supplies return and recycling free of charge. In 2004,
HP Planet Partners for LaserJet Supplies was available  in 85% of the world market where
HP LaserJet supplies are sold. Postage-paid and  pre-addressed labels are included within the
instruction guide in most HP LaserJet print cartridge boxes. Labels and bulk boxes are also available
through the Web site: 
www.hp.com/recycle .
Use the label to return empty,  original HP LaserJet print cartridges only. Please do not use this label
for non-HP cartridges, refilled or remanufactured cartridges, or warranty returns. Printing supplies or
other objects inadvertently sent to the  HP Planet Partners program cannot be returned.
More than 10 million HP LaserJet print cartridges  were recycled globally in 2004 through the
HP Planet Partners supplies recycling program. This record number represents 26 million pounds of
print cartridge materials diverted from landfills. Worldwide, in 2004, HP recycled an average of 59%
of the print cartridge by weight consisting primarily of plastic and metals. Plastics and metals are
used to make new products such as HP  products, plastic trays, and spools. The remaining materials
are disposed of in an environmentally responsible manner.
● U.S. returns.  For a more environmentally responsible return of used cartridges and supplies,
HP encourages the use of bulk returns. Simply  bundle two or more cartridges together and use
the single, pre-paid, pre-addressed UPS label that is supplied in the package. For more
information in the U.S., call 1-800-340-2445 or visit the HP Web site at 
www.hp.com/recycle .
● Non-U.S. returns.
 Non-U.S. customers should visit the 
www.hp.com/recycle Web site for
further information regarding availability of the HP Supplies Returns and Recycling Program.
Paper
This product is capable of using recycled papers when  the paper meets the guidelines outlined in the
HP LaserJet Printer Family Print Media Guide . This product is suitable for the use of recycled paper
according to EN12281:2002.
254 Appendix D   Regulatory information ENWW
 
						

							Material restrictions
This HP product contains mercury in the fluorescent lamp of the scanner and/or control panel liquid
crystal display that may require special handling at end-of-life.
This HP product contains a battery that might require special handling at end-of-life. The batteries
contained in or supplied by Hewlett-Packard for this product include the\
 following:
HP LaserJet M4345 device
TypeCarbon monofluoride lithium battery BR1632
Weight(1.5 g)
LocationOn formatter board
User-removableNo
For recycling information, you can go to www.hp.com/recycle, or contact your local authorities or the
Electronics Industries Alliance: 
www.eiae.org .
Disposal of waste equipment by users  in private households in the
European Union
This symbol on the product or on its packaging  indicates that this product must not be disposed of
with your other household waste. Instead, it is your responsibility to dispose of your waste equipment
by handing it over to a designated collection point for the recycling of waste electrical and electronic
equipment. The separate collection and recycling of your waste equipment at the time of disposal will
help to conserve natural resources and ensure that it is recycled in a manner that protects human
health and the environment. For more information about where you can drop off your waste
equipment for recycling, please contact your local city office, your household waste disposal service
or the shop where you purchased the product.
ENWW Environmental product stewardship program 255
 
						

							Material Safety Data Sheet (MSDS)
Material Safety Data Sheets (MSDS) for supplies containing chemical substances (for example,
toner) can be obtained by contacting the HP Web site at 
www.hp.com/go/msds or www.hp.com/
hpinfo/community/environment/productinfo/safety .
For more information
To obtain information about these environmental topics:
●Product environmental profile sheet for this and many related HP products
● HP’s commitment to the environment
● HP’s environmental management system
● HP’s end-of-life product return and recycling program
● Material Safety Data Sheets
Visit 
http://www.hp.com/go/environment  or http://www.hp.com/hpinfo/community/environment/
productinfo/safety .
256 Appendix D   Regulatory information ENWW
 
						

							Telecom statement
The HP LaserJet M4345x, HP LaserJet M4345xs, and HP LaserJet M4345xm models have the HP
LaserJet Analog Fax Accessory 300 already installed to provide communication to the public switch
telephone network (PSTN) for fax functionality. See the  HP LaserJet Analog Fax Accessory 300
User Guide  for all regulatory approval information and regulatory notices associated with the fax
functionality and that device.
ENWW Telecom statement 257
 
						

							Declaration of conformity
Declaration of Conformity
according to ISO/IEC Guide 22 and EN 45014
Manufacturers Name:Hewlett-Packard Company
Manufacturers Address: 11311 Chinden Boulevard,
Boise, Idaho 83714-1021, USA
declares, that the product
Product Name: HP LaserJet M4345 series
Regulatory Model Number
3): BOISB-0407-00 and BOISB-0407-01
Including: CB425A, CB426A, CB427A, CB428A, BOISB-030800
4
Product Options:
ALL
Toner Cartridges: Q5945A
conforms to the following Product Specifications:
Safety: IEC 60950-1:2001 / EN60950-1: 2001 +A11
IEC 60825-1:1993 +A1 +A2 / EN 60825-1:1994  +A1 +A2 (Class 1 Laser/LED Product)
GB4943-2001
EMC: CISPR 22:1993 +A1 +A2 / EN 55022:1994 +A1 +A2 -- Class B
1)
EN 61000-3-2:2000
EN 61000-3-3:1995 +A1
EN 55024:1998 +A1 +A2
FCC Title 47 CFR, Part 15 Class B
2 / ICES-003, Issue 42)
GB9254-1998, GB17625.1-2003
Supplementary Information:
The product herewith complies with the requirements of the EMC Directive 89/336/EEC and the Low Voltage Directive 73/23/EEC, an d
carries the CE-Marking accordingly.
1) The product was tested in a typical configuration with Hewlett-Packa\
rd Personal Computer Systems.
2) This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device ma y not cause
harmful interference, and (2) this device must accept any  interference received, including interference that may cause undesire d operation.
3) For regulatory purposes, this product is assigned a Regulatory model  number. This number should not be confused with the product
name or the product number(s).
4) All worldwide modular approvals for analog fax accessory obtained by Hewlett-Packard under the regulatory model number
BOISB-030800 incorporate the Multi-Tech Systems MT5634SMI Socket Modem Module.
Boise, Idaho , USA
March 29, 2006
For regulatory topics only:
Australia Contact: Product Regulations Manager, Hewlett-Packard Australia Ltd., 31-41 Joseph Street, Blackburn, Victoria 3130, A ustralia
European Contact: Your Local Hewlett-Packard Sales and Service Office or Hewlett-Packard GmbH, Department HQ-TRE / Standards Europe, Herrenberger Strasse 140, D-71034 Bblingen, Germany, (FAX: +49-7031-14-3143)
USA Contact: Product Regulations Manager, Hewlett-Packard Company, PO Box 15, Mail Stop 160, Boise, ID 83707-0015, USA, (Phone: 208-396-6000)
258 Appendix D   Regulatory information ENWW