HP LaserJet M3035xs MFP User Manual

3 Input/output (I/O) configuration
This chapter describes how to configure certain network parameters on the device. The following topics
are covered:
●
USB configuration
●
Network configuration
ENWW 49
 

USB configuration
This device supports a USB 2.0 connection. You must use an A-to -B type USB cable for printing.
Figure 3-1  USB connection
1USB connector
2USB port (type B)
50 Chapter 3   Input/outpu t (I/O) configuration ENWW
 

Network configuration
You might need to configure certain network parameters on the device. You can configure these
parameters in the following locations:
●Installation software
● Device control panel
● Embedded Web server
● Management software (HP Web Jetadmin or HP LaserJet Utility for Macintosh)
NOTE
For more information about using the embedded Web server, see Use the embedded
Web server
For more information on supported networks  and network configuration tools, see the HP Jetdirect Print
Server...

6.Touch  IPV4 Settings .
7. Touch  Config Method .
8. Touch  Manual .
9. Touch  Save.
10. Touch  Manual Settings .
11. Touch  IP Address .
12. Touch the IP Address text box.
13. Use the touchscreen keypad to type the IP address.
14. Touch  OK.
15. Touch  Save.
Set the subnet mask
1.Scroll to and touch  Administration.
2. Scroll to and touch  Initial Setup.
3. Touch  Networking and I/O .
4. Touch  Embedded Jetdirect .
5. Touch  TCP/IP .
6. Touch  IPV4 Settings .
7. Touch  Config Method .
8. Touch  Manual...

5.Touch  TCP/IP .
6. Touch  IPV4 Settings .
7. Touch  Config Method .
8. Touch  Manual .
9. Touch  Save.
10. Touch  Manual Settings .
11. Touch  Default Gateway .
12. Touch the Default Gateway text box.
13. Use the touchscreen keyboard to type the default gateway.
14. Touch  OK.
15. Touch  Save.
Configure TCP/IPv6 parameters
For information about configuring the device for a  TCP/IPv6 network, see the HP Jetdirect Embedded
Print Server Administrators Guide.
Disable network protocols (optional)
By factory...

7.Touch  Off.
8. Touch  Save.
Disable AppleTalk
1.Scroll to and touch  Administration.
2. Scroll to and touch  Initial Setup.
3. Touch  Networking and I/O .
4. Touch  Embedded Jetdirect .
5. Touch  AppleTalk .
6. Touch  Enable .
7. Touch  Off.
8. Touch  Save.
Disable DLC/LLC
1.Scroll to and touch  Administration.
2. Scroll to and touch  Initial Setup.
3. Touch  Networking and I/O .
4. Touch  Embedded Jetdirect .
5. Touch  DLC/LLC .
6. Touch  Enable .
7. Touch  Off.
8. Touch  Save.
HP Jetdirect EIO print...

4 Media and trays
This chapter describes how to use some basic product features:
●
General guidelines for media
●
Media considerations
●
Select print media
●
Printing and paper-storage environment
●
Load media
●
Control print jobs
●
Select output bins
ENWW 55
 

General guidelines for media
Before purchasing any paper or specialized forms in quantity, verify that your paper supplier has
obtained and understands the print-media requirements that are specified in the HP LaserJet Printer
Family Print Media Guide .
See 
HP Customer Care  to order the HP LaserJet Printer Fam ily Print Media Guide. To download a copy
of the guide, go to 
www.hp.com/support/ljpaperguide .
It is possible that paper could meet all of the guidelines in this chapter or the  HP LaserJet...

●Do not use any media that produces hazardous emissi
ons, or that melts, offsets, or discolors when
exposed to the temperature of the fuser.
● Do not use paper that is embossed or coated, or 
any media that is not designed to withstand the
fusing temperature of the device. Do not use lett erhead paper or preprinted forms that are made
with dyes or inks that cannot  withstand the heat of the fuser.
To order HP LaserJet printing supplies, see 
Order parts, accessories, and supplies .
General media...

Media considerations
Envelopes
Envelope construction is critical. Envelope fold lines can vary considerably, not only between
manufacturers, but also within a box from the sa me manufacturer. Successful printing on envelopes
depends upon the quality of the envelopes. W hen selecting envelopes, consider the following
components:
● Weight
: The weight of the envelope paper should not exceed 105 g/m
2 (28 lb) or jamming might
occur.
● Construction
: Prior to printing, envelopes should lie flat with less...