HP LaserJet M1120 User Manual

8 Copy
●Load originals
●
Use copy
●
Copy settings
●
Copy a book
●
Copy photos
●
Duplex (two-sided) copy jobs
ENWW51
 

Load originals
1.Lift the flatbed scanner cover.
2.Place the original document face-down on the flatbed scanner with the upper-left corner of the
document at the corner indicated by the icon on the scanner.
3.Gently close the lid.
Use copy
One-touch copy
1.Load the document onto the flatbed scanner.
2.Press Start Copy on the product control panel to start copying.
3.Repeat the process for each copy.
Multiple copies
Change the number of copies for the current job
1.On the product control panel, press # of...

4.Use the arrow buttons to set the number of copies (between 1 and 99) that you want as the default.
5.Press OK to save your selection.
Cancel a copy job
To cancel a copy job, press Cancel on the product control panel. If more than one process is running,
pressing Cancel clears the process that currently appears on the product control-panel display.
NOTE:If you cancel a copy job, clear the document from the flatbed scanner.
Reduce or enlarge copies
Reduce or enlarge copies for the current job
1.On the...

Reduction/enlargement settings
●Original=100%
●A4 > Ltr=94%
●Ltr > A4=97%
●Full Page=91%
●2 pages/sheet
●4 pages/sheet
●Custom: 25-400%
NOTE:When using the 2 pages/sheet or 4 pages/sheet setting, select the page orientation (portrait
or landscape).
Copy settings
Copy quality
Five copy-quality settings are available: Text, Draft, Mixed, Film photo, and Picture.
The factory-set default for copy quality is Text. This setting is the best for items that contain mostly text.
When making a copy of a photo or...

Clean the scanner glass
Dirty glass, from fingerprints, smudges, hair, and so on, slows down performance and affects the
accuracy of special features such as fit-to-page and copy.
1.Turn off the product, unplug the power cord from the electrical socket, and raise the lid.
2.Clean the glass by using a soft, lint-free cloth or sponge that has been moistened with nonabrasive
glass cleaner.
CAUTION:Do not use abrasives, acetone, benzene, ammonia, ethyl alcohol, or carbon
tetrachloride on any part of the...

4.Use the arrow buttons button to adjust the setting. Move the slider to the left to make all of the
copies lighter than the original, or move the slider to the right to make all of the copies darker than
the original.
5.Press OK to save the selection.
Change copy job print density
Increasing the print density at the product control panel darkens the print on the page.
1.On the control panel, press Setup.
2.Use the arrow buttons to select System setup, and then press OK.
3.Use the arrow buttons to select...

●Bond
●Recycled
●Color
●Light
●Heavy
●Cardstock
●Envelope #10
●Rough
Change the default media-size setting
1.On the product control panel, press Setup.
2.Use the arrow buttons to select System setup, and then press OK.
3.Use the arrow buttons to select Paper setup, and then press OK.
4.Use the arrow buttons to select Def. paper size, and then press OK.
5.Use the arrow buttons to select a media size, and then press OK.
6.Press OK to save the selection.
Change the default media-type setting
1.On the...

Copy a book
1.Lift the lid and place the book on the flatbed scanner with the page that you want to copy at the
corner indicated by the icon on the scanner.
2.Gently close the lid.
3.Gently press down on the lid to press the book to the flatbed scanner surface.
CAUTION:Pressing on the flatbed cover with too much force can break the lid hinges.
4.Press Start Copy.
58 Chapter 8   CopyENWW
 

Copy photos
1.Lift the lid and place the photo on the flatbed scanner with the picture-side down and the upper-
left corner of the photo at the corner indicated by the icon on the scanner.
2.Gently close the lid.
3.Adjust the copy quality setting to Film photo.
4.Press Start Copy.
Duplex (two-sided) copy jobs
Copy a two-sided original to a one-sided document
Copies resulting from these procedures are printed on one side, and need to be hand-collated.
1.Load the first page of the document to be copied...

Copying a two-sided original to a two-sided document
1.Load the first page of the document to be copied face-down onto the flatbed scanner, and then
close the scanner lid.
2.Press Start Copy.
3.Flip the page on the scanner to the second side, and then close the scanner lid.
4.Remove the copied page from the output bin and place it face down into the priority input tray with
the top edge feeding into the device first.
5.Press Start Copy.
6.Remove the copied page from the output bin, and then set it aside...