HP LaserJet M1120 User Manual

To change the settings for all print
jobs until the software program is
closedTo change the default settings for all
print jobsTo change the device configuration
settings
you must select the saved preset option
every time you open a program and print.NOTE:Configuration settings might
not be available in Classic mode.
Software installation types for Macintosh
Install Macintosh software for direct connections (USB)
1.Insert the device CD into the CD-ROM drive and run the installer. If the CD menu does not...

Supported utilities for Macintosh
Embedded Web server (network models only)
Network models are equipped with an embedded Web server, which provides access to information
about device and network activities. This information appears in a Web browser, such as Microsoft
Internet Explorer, Netscape Navigator, Apple Safari, or Firefox.
The embedded Web server resides on the device. It is not loaded on a network server.
The embedded Web server provides an interface to the device that anyone who has a network-...

Use features in the Macintosh printer driver
Print
Create and use printing presets in Macintosh
Use printing presets to save the current printer driver settings for reuse.
Create a printing preset
1.On the File menu, click Print.
2.Select the driver.
3.Select the print settings.
4.In the Presets box, click Save As..., and type a name for the preset.
5.Click OK.
Use printing presets
1.On the File menu, click Print.
2.Select the driver.
3.In the Presets box, select the printing preset that you want to...

Print multiple pages on one sheet of paper in Macintosh
You can print more than one page on a single sheet of paper. This feature provides a cost-effective way
to print draft pages.
1.On the File menu, click Print.
2.Select the driver.
3.Open the Layout pop-up menu.
4.Next to Pages per Sheet, select the number of pages that you want to print on each sheet (1, 2,
4, 6, 9, or 16).
5.Next to Layout Direction, select the order and placement of the pages on the sheet.
6.Next to Borders, select the type of...

Scan from the product and HP Director (Macintosh)
For more information about tasks and settings described in this section, see the HP Director online Help.
Scanning tasks
To scan to a software program, scan an item using the program itself. Any TWAIN-compliant program
can scan an image. If the program is not TWAIN-compliant, save the scanned image to a file then place,
open, or import the file in the software program.
Use page-by-page scanning
1.Lift the flatbed scanner lid and load the original that is...

26 Chapter 4   Use the product with Macintosh ENWW
 

5 Connectivity
●Connect the product directly to a computer with USB
●
Printer sharing disclaimer
●
Supported network operating systems
●
Supported network protocols
●
Install the product on a network (network models only)
ENWW27
 

Connect the product directly to a computer with USB
NOTE:Do not connect the USB cable from the product to the computer until the installer prompts you
to do so.
1.Insert the product CD into your computer. If the software installer does not start, navigate to the
setup.exe file on the CD and double-click the file.
2.Follow the installer instructions.
3.Allow the installation process to complete, and then restart the computer.
Printer sharing disclaimer
HP does not support peer-to-peer networking, as the...

Supported network protocols
●TCP/IP
Install the product on a network (network models only)
Connect the product to the network
To connect a network model to a network, you need the following items:
●Wired TCP/IP network
●Ethernet cable (RJ-45)
1.Connect the Ethernet cable to an available port on the Ethernet hub or router.
2.Connect the Ethernet cable to the Ethernet port on the back of the product.
3.Verify that the green light is illuminated on the network port located on the back of the product....

30 Chapter 5   ConnectivityENWW