HP LaserJet M1120 User Manual

Embedded Web server (network models only)
Network models are equipped with an embedded Web server (EWS), which provides access to
information about product and network activities. A Web server provides an environment in which web
programs may run, much in the same way that an operating system, such as Windows, provides an
environment for programs to run on a computer. The output from these programs can then be displayed
by a Web browser, such as Microsoft Internet Explorer, Safari, or Netscape...

Manage supplies
Check and order supplies
You can check the supplies status by using the product control panel. Hewlett-Packard recommends
that you place an order for a replacement print cartridge when Low message for a print cartridge first
appears. Use a new, authentic HP print cartridge to obtain the following types of supplies information:
●Amount of cartridge life remaining
●Estimated number of pages remaining
●Number of pages printed
●Other supplies information
If the supplies levels are low, you...

a language line interpreter will connect approximately one minute after the beginning of the call. The
language line interpreter is a service that will translate between you and the representative for the HP
fraud hotline.
Recycle supplies
To install a new HP print cartridge, follow the instructions that are included in the box that contains the
new supply, or see the getting started guide.
To recycle supplies, place the used supply in the box in which the new supply arrived. Use the enclosed
return...

2.Grasp the handle on the print cartridge and then pull the cartridge straight out to remove it. See
the recycling information inside the print cartridge box.
3.Rock the print cartridge back and forth.
4.Remove the new print cartridge from its packaging, remove the orange cover from the print
cartridge, and then pull the orange tab straight out to remove the sealing tape.
5.Insert the cartridge into the product until it is firmly in place.
74 Chapter 10   Manage and maintain the product ENWW
 

6.Close the print-cartridge door.
CAUTION:If toner gets on any clothing, wipe it off with a dry cloth and wash the clothing in cold water.
Hot water sets toner into the fabric.
Clean the product
Clean the paper path
During the printing process, paper, toner, and dust particles can accumulate inside the product. Over
time, this buildup can cause print-quality problems such as toner specks or smearing. This product has
a cleaning mode that can correct and prevent these types of problems.
Specks Smearing...

2.Clean the white document lid backing by using a soft cloth or sponge that has been moistened with 
a mild soap and warm water. Wash the backing gently to loosen debris; do not scrub the backing.
3. Dry the backing by using a chamois or soft cloth.
CAUTION:Do not use paper-based wipes because they might scratch the backing.
4.If this does not clean the backing well enough, repeat the previous steps and use isopropyl alcohol 
to dampen the cloth or sponge, and then wipe the backing thoroughly with a damp...

11 Problem solve
●Problem-solving checklist
●
Control-panel messages
●
Control-panel display problems
●
Clear jams
●
Solve image-quality problems
●
Solve connectivity problems
●
Solve software problems
ENWW77
 

Problem-solving checklist
Follow these steps when trying to solve a problem with the product.
Step
numberVerification stepPossible problemsSolutions
1Is the power on?No power due to failed power source, cable,
switch, or fuse.1.Verify that the product is plugged in.
2.Verify that the power cable is functional
and that the power switch is on.
3.Check the power source by plugging
the product directly into the wall or into
a different outlet.
2Does Ready appear in the
product control panel?
The control...

Step
numberVerification stepPossible problemsSolutions
6 Does the product scan to the
computer?
Initiate a scan from the basic
desktop software at your
computer.The cable is not connected correctly.Reconnect the cable.
Software is not installed correctly or an error
occurred during software installation.Uninstall and then reinstall the product
software. Verify that you are using the
correct installation procedure and the
correct port setting.
If the error persists, turn off the product and then turn on...

Control-panel messages
The majority of the control-panel messages are intended to guide the user through typical operation.
The control-panel messages indicate the status of the current operation, and include a page count on
the second line of the display, if appropriate. When the product is receiving print data or scanning
commands, control-panel messages indicate this status. In addition, alert messages, warning
messages, and critical error messages indicate situations that might require some action....