HP LaserJet Enterprise M551n User Manual
Have a look at the manual HP LaserJet Enterprise M551n User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1114 HP manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Table 2-9 General Print Settings menu (continued)
First level Second level Values
Font NumberRange: 0 – 999
Default = 0
Font PitchRange: 0.44 – 99.99
Default = 10
Font Point SizeRange: 4.00 – 999.75
Default = 12.00
Symbol SetSelect from a list of symbol sets.
Append CR to LF No*
Yes
Suppress Blank PagesNo*
Yes
Media Source MappingStandard*
Classic
Default Print Options menu
In the following table, asterisks (*) indicate the factory default setting.
Table 2-10 Default Print Options menu
First level Second level Values
Number of Copies R ang e: 1 – X
Default = 1
Default Paper Size Select from a list of sizes
that the product supports.
Default Custom Paper
Size Unit of Measure Inches
X DimensionRange: 2.99 – 12.28
Default = 12.28
Y DimensionRange: 5.00 – 18.50
Default = 18.5
MMX DimensionRange: 76 – 312
Default = 312
Y DimensionRange: 127 – 470
Default = 470
ENWW Administration menu
23
Table 2-10 Default Print Options menu (continued) First level Second level Values Sides 1-sided * 2-sided 2-Sided Format Book-style * Flip-style Edge to Edge Enabled Disabled* 24 Chapter 2 Control panel menus ENWW
Display Settings menu In the following table, asterisks (*) indicate the factory default setting. Table 2-11 Display Settings menu First level Second level Values Display Brightness Range: -10 to 10 Default = 0 Language Select from a list of languages that the product supports. Show IP Address Display* Hide Inactivity Timeout Range: 10 – 300 seconds Default = 60 Clearable Warnings On Job* Continuable Events Auto continue (10 seconds)* Press OK to continue ENWW Administration menu 25
Manage Supplies menu In the following table, asterisks (*) indicate the factory default setting. Table 2-12 Manage Supplies menu First level Second levelThird levelFourth level Values Print Supplies Status Supply Settings Black Cartridge Very Low Settings Stop Prompt to continue* Continue Low Threshold Settings 1-100% Color Cartridges Very Low Settings Stop Prompt to continue* Continue Low Threshold SettingsCyan Cartridge Magenta Cartridge Yellow Cartridge1-100% Toner Collection Unit Very Low Settings Stop* Prompt to continue Continue Fuser KitVery Low Settings Stop Prompt to continue* Continue Low Threshold Settings 1-100% Color/Black Mix Auto * Mostly Color Pages Mostly Black Pages Supply Messages Low Message On * Off Level Gauge On * Off Reset Supplies New Fuser Kit No * Yes 26 Chapter 2 Control panel menus ENWW
Manage Trays menu In the following table, asterisks (*) indicate the factory default setting. Table 2-13 Manage Trays menu First level Values Use Requested Tray Exclusively* First Manually Feed Prompt Always* Unless loaded Size/Type Prompt Display* Do not display Use Another Tray Enabled* Disabled Alternative Letterhead Mode Disabled* Enabled Blank Pages Auto* Yes Override A4/Letter Yes* No ENWW Administration menu 27
Network Settings menu In the following table, asterisks (*) indicate the factory default setting. Table 2-14 Network Settings menu First level Values I/O Timeout Range: 5 – 300 sec Default = 15 Jetdirect Menu See the table that follows for details. Table 2-15 Jetdirect Menu First level Second level Third level Fourth level Fifth level Values Information Print Sec Report Yes No* TCP/IP Enable On * Off Host Name Use the arrow buttons to edit the host name. NPIXXXXXX * IPv4 Settings Config Method Bootp* DHCP Auto IP Manual Manual Settings NOTE:This menu is available only if you select the Manual option under the Config Method menu. IP Address Enter the address Subnet Mask Enter the address Default Gateway Enter the address Default IP Auto IP* Legacy DHCP Release Yes No* 28 Chapter 2 Control panel menus ENWW
Table 2-15 Jetdirect Menu (continued)
First level Second level Third level Fourth level Fifth level Values
DHCP Renew Yes
No*
Primary DNS Range: 0 – 255
Default =
xxx.xxx.xx.xx
Secondary DNS Range: 0 – 255
Default = 0.0.0.0
IPv6 Settings Enable On*
Off
AddressManual Settings Enable On
Off*
AddressSelect from a
provided list.
DHCPV6 Policy Router Specified
Router
Unavailable*
Always
Primary DNS Select from a
provided list.
Secondary DNS Select from a
provided list.
Proxy Server S ele ct fr o m a
provided list.
Proxy Port D efa ult = 00080
Idle Timeout D efa ult = 0270
General Security Secure Web HTTPS Required *
HTTPS Optional
IPSEC Keep
Disable*
802.1x Reset
Keep*
Reset Security Yes
No*
ENWW Administration menu
29
Table 2-15 Jetdirect Menu (continued) First level Second level Third level Fourth level Fifth level Values Diagnostics Embedded Tests LAN HW Test Yes No* HTTP Test Yes No* SNMP Test Yes No* Data Path Test Yes No* Select All Tests Yes No* Execution Time Range: 1 – 60 hours Default = 1 Execute Yes No* Ping TestDest Type IPv4 IPv6 Dest IPv4 Range: 0 – 255 Default = 127.0.0.1 Dest IPv6 Select from a provided list. Default = : : 1 Packet Size Default = 64 Timeout Default = 001 Count Default = 004 Print Results Yes No* Execute Yes No* Ping Results Packets Sent Default = 00000 Packets Received Default = 00000 Percent Lost Default = 000 30 Chapter 2 Control panel menus ENWW
Table 2-15 Jetdirect Menu (continued) First level Second level Third level Fourth level Fifth level Values RTT Min Default = 0000 RTT Max Default = 0000 RTT Average Default = 0000 Ping In Progress Yes No* Refresh Yes No* Link Speed Auto* 10T Half 10T Full 100TX Half 100TX Full 100TX Auto 1000T Full ENWW Administration menu 31
Troubleshooting menu In the following table, asterisks (*) indicate the factory default setting. Table 2-16 Troubleshooting menu First level Second levelThird levelFourth level Values Exit Troubleshooting NOTE: This item only displays if you are backing out of the Troubleshooting menu. NOTE: The product shuts down and restarts when this menu item is selected. Print Event Log View Event Log Print Paper Path Page Print Quality Pages Print PQ Troubleshooting Pages Print Diagnostic Page Color Band Test Print Test Page Copies Range: 1 – 30 Default = 1 Diagnostic Tests Disable Cartridge Check Paper Path Sensors Start Test Paper Path Test Print Test Page Print Source Tray Select from a list of the available trays. Test Duplex Path Off* On Number of Copies Range: 1 – 500 Default = 1 Manual Sensor Test Select from a list of the product sensors. Manual Tray/Bin Sensor Test Select from a list of the product sensors. 32 Chapter 2 Control panel menus ENWW