HP Deskjet F735 User Manual
Here you can view all the pages of manual HP Deskjet F735 User Manual. The HP manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 61
To make a borderless copy of a photo from the control panel 1. Load photo paper in the input tray. For more information on loading photo paper, see “Load photo paper” on page 26 . 2. Load your original print side down on the right front corner of the glass. NOTE:When loading a 10 x 15 cm (4 x 6 inch) original, ensure that the longer side of the original is perfectly aligned with the front edge of the glass. 3. Press the Paper Selection button to select either Photo (Large) or Photo (Small) depending...
Page 62
To copy a two-page document from the control panel 1. Make sure you have paper loaded in the input tray. 2. Load your original print side down on the right front corner of the glass. TIP:For quality copies, ensure that the scanner glass is clean and that there are no foreign materials adhering to it. For more information, see “Clean the glass” on page 65 . 3.Press the Paper Selection button to set the paper type. 4. Press Start Copy Black. 5. Wait until the product has finished printing the first...
Page 64
9 Use the scan features Scanning is the process of converting text and pictures into an electronic format for your computer. You can scan almost anything (photos, magazine articles and text documents) on the HP All-in-One. NOTE: When scanning, the HP Photosmart Software enables you to save an image in the following file formats: BMP, DC X, FPX, GIF, JPG, PCD, PCX, and TIF. You can use the scanning features of the HP All-in-One to do the following: • Scan text from an article into your word processor...
Page 65
computer, look for the HP Digital Imaging Monitor icon in the system tray at the lower right side of the screen, near the time. NOTE: Closing the HP Digital Imaging Monitor icon in the Windows system tray can cause the HP All-in-One to lose some of its scan functionality. If this happens, you can restore full functionality by restarting your computer or by starting the HP Photosmart Software. The HP Photosmart Software that you installed on your computer has many tools that you can use to edit and...
Page 66
Edit a scanned image You can edit a scanned image, such as a photo or graphic, using the software you installed with the HP All-in-One. Using this software, you can rotate or crop the image, as well as adjust the brightness, contrast, and color saturation. NOTE: If you are using the HP Photosmart Software, the Optical Character Recognition (OCR) software might not be installed on your computer. To install the OCR software, you must re-insert the software disk and select OCR under the Custom...
Page 68
10 Maintain the HP All-in-One The HP All-in-One requires little maintenance. Sometimes you might want to clean the glass and lid backing to remove surface dust and ensure that your copies and scans remain clear. You will also need to replace, align, or clean your print cartridges from time to time. This section provides instructions for keeping the HP All-in-One in top working condition. Perform these simple maintenance procedures as necessary. This section contains the following topics: •Clean the HP...
Page 69
3.Dry the glass with a dry, soft, lint-free cloth to prevent spotting. 4. Plug in the power cord, and then turn on the product. Clean the lid backing Minor debris can accumulate on the white document backing located underneath the lid of the HP All-in-One. To clean the lid backing 1. Turn off the product, unplug the power cord, and raise the lid. 2. Clean the white document backing with a soft cloth or sponge slightly moistened with a mild soap and warm water. Wash the backing gently to loosen...
Page 70
4.If further cleaning is needed, repeat the previous steps using isopropyl (rubbing) alcohol, and wipe the backing thoroughly with a damp cloth to remove any residual alcohol. CAUTION: Be careful not to spill alcohol on the glass or exterior of the product, as this might damage it. 5. Plug in the power cord, and then turn on the product. Print a self-test report If you are experiencing problems with printing, print a self-test report before you replace the print cartridges. This report provides...