HP DeskJet F2280 User Manual

Cause:The original was placed incorrectly on the glass. 
If this did not solve the issue, try the next solution.
Solution 2: Check the ink levels in the print cartridges
Solution: Check the estimated ink levels remaining in the print cartridges.
NOTE:Ink level warnings and indicators provide estimates for planning 
purposes only. When you receive a low-ink warning message, consider having a 
replacement cartridge available to avoid possible printing delays. You do not need
to replace the print cartridges...

Cause:You were trying to make a borderless copy without using photo paper.
Scan troubleshooting
Use this section to solve these scan problems: 
•Scan halts 
•Scan fails
•Scanned image is blank 
•Scanned image is incorrectly cropped 
•Scanned image has incorrect page layout 
•Text format is incorrect 
•Scanned image shows dotted lines instead of text
•Text is incorrect or missing 
Scan halts 
Solution: Turn off the computer and then turn it back on. 
If this does not work, try changing the scan to a lower...

If this did not solve the issue, try the next solution.
Solution 3: Make sure the HP Photosmart Software is installed on your computer 
Solution: Insert the product installation CD and install the software. 
For more information, see the Setup Guide.
Cause: The HP Photosmart Software was not installed on your computer. 
If this did not solve the issue, try the next solution.
Solution 4: Make sure the HP Photosmart Software is running on your computer
Solution: Open the software you installed with the...

If this problem occurs frequently, or if you encounter memory problems while using 
other applications, you might need to add more memory to your computer. See the 
user guide that came with your computer for more information. 
Cause: Too many applications were running on your computer. These applications 
occupied your computer memory.
Scanned image is blank 
Solution: Load your original print side down on the right front corner of the glass.
Cause:The original was placed incorrectly on the glass....

Scanned image shows dotted lines instead of text 
Solution: Make a black-and-white copy of the original and then scan the copy. 
Cause: If you used the Text image type to scan text that you plan to edit, the 
scanner might not recognize color text. The  Text image type scans at 300 x 300 dpi, 
in black and white. 
If you are scanning an original that has graphics or artwork surrounding the text, the 
scanner might not recognize the text.
Text is incorrect or missing
Try the following solutions to resolve...

NOTE:If you are using the HP Photosmart Software, the Optical Character 
Recognition (OCR) software might not be installed on your computer. To install
the OCR software, you must re-ins ert the software disk and select OCR under the 
Custom  installation options.
See the documentation that came with Readiris, or whichever OCR software you use, 
for information on how to select the  OCR language. 
Cause: The scan document settings were not set to the correct optical character 
recognition (OCR) language....

On lightPaper lightCheckPrintCartridgelight
PaperTypelights
DescriptionSolution
Blink fasterfor 3secondsand thenOn
OffOff1 On, 
1 Off
The HP All- in-One isbusy.
Wait for the HP All-in-One tofinish.
Blink for 20secondsand thenOn
OffOff1 On, 
1 Off
Scan  was pressed,and therewas noresponsefrom thecomputer.
Make sure the computer isturned on, the HP All-in-Onesoftware is installed, and thecomputer is connected to theHP All-in-One with a USBcable.
OnBlinkingOff1 On, 
1 Off
The HP All- in-One is out of...

On lightPaper lightCheckPrintCartridgelight
PaperTypelights
DescriptionSolution
HP All-in-One.
The printcartridgemight bedefective.
1. Remove the black print cartridge. 
2. Close the print cartridge door. 
3. Check the On light.
•If the On light blinks, replace the tri-colorprint cartridge.
•If the  On light remains steadily lit, replacethe black printcartridge.
OnBlinkingBlinking1 On, 
1 Off
The print carriage isstalled.
Open the print cartridge door,and check that the carriage isnot blocked....

•Scan errors 
•Unable to print 
•Product might not be correctly installed
•Product was not found 
•Product could not find available scan destinations 
•Required software component was not found or was incorrectly installed
•Error occurred while communicating with the product 
Door open 
Solution: Close the print cartridge door.
Cause:The print cartridge door was open.
Firmware revision mismatch 
Solution: To find support and warranty information, go to the HP Web site at
www.hp.com/support. If prompted,...

Solution 2: Make sure the print carriage is not blocked 
Solution: Turn off the product, open the print cartridge door, and remove any 
objects that are blocking the print carriage (including any packing materials), and then 
turn on the product.
For more information, see:
The print carriage is stalled 
Cause: The print carriage was blocked.
Memory is full 
Solution: Try making fewer copies at a time. 
Cause: The document you are copying has exceeded the memory of the product.
Scan errors 
Review this...