HP Designjet T7100 User Manual

6.Select the  Device and Document Settings  tab, and press the Custom Properties  button.
7.In the Paper/Quality  tab, check the Show preview before printing  box, and select the
paper type that you intend to use.
NOTE: If you select neither the paper source nor th e paper type, the printer will not print on any
protected roll (see 
Roll protection on page 91 ).
8. Select the print quality (your own choice 
between speed and quality of printing).
ENWW Print a project
123
Printing examples
 

9.Press the  Margins/Layout  button and select a layout option.
If the job is 10 mm smaller in both dimensions than the page size you have chosen, select
Standard margins . See 
Select margins options on page 83.
If the job is the same size as the page you have chosen, but has at least 5 mm of white space
around the edges, select  Clip contents by margins .
If the job is the same size as the page you ha ve chosen, and does not have 5 mm of white space
around the edges, select  Oversize. The final output...

11.Press the  OK button and save your configu ration changes to a PC3 file.
12.When you have pressed the  OK button in the Plot window, the printer will construct a print
preview.
Using the Embedded Web Server to submit files
From the HP Utility or the Embedded Web Server, select  Job Center > Submit Job . With some Web
browsers, you will see the window below; with ot her Web browsers, the mechanism for adding files is
slightly different.
ENWW Print a project
125
Printing examples
 

Press the Add files  button (or  Choose File,  Add another file) to choose the files from your
computer that you want to print. The files must be in one of the following formats:
● HP-GL/2
● RTL
● CALS/G4
● PDF (with the PostScript upgrade only)
● PostScript (with the PostScript upgrade only)
● TIFF (with the PostScript upgrade only)
● JPEG (with the PostScript upgrade only)
NOTE:
When you print to a file, the file should be  in one of the above formats, but its name may
have an extension such as  .plt...

Using clip contents by margins
You can select this margins option from Advanced settings > Paper  > Layout/Margins  > Print
with margins  > Layout > Clip contents by margins .
Use this option when the contents to be printed ha ve white borders and a size equal to that of the
paper you have selected. The printer will use the wh ite border for its margins and you will get a page
of size equal to that which  is selected in the driver.
Print a presentation
This section demonstrates how to print a pr...

4.Select the  Device and Document Settings  tab, and press the Custom Properties  button.
5.In the Paper/Quality  tab, check the Show preview before printing  box, and select the
paper type that you intend to use.
NOTE: If you select neither the paper source nor th e paper type, the printer will not print on any
protected roll (see 
Roll protection on page 91 ).
6. Select the print quality (your own choice 
between speed and quality of printing).
128 Chapter 12   Practical printing examples ENWW
Printing...

7.Press the  Margins/Layout  button and select a layout option.
If the job is 10 mm smaller in both dimensions than the page size you have chosen, select
Standard margins . See 
Select margins options on page 83.
If the job is the same size as the page you have chosen, but has at least 5 mm of white space
around the edges, select  Clip contents by margins .
If the job is the same size as the page you ha ve chosen, and does not have 5 mm of white space
around the edges, select  Oversize. The final output...

9.Press the  OK button and save your configu ration changes to a PC3 file.
10.When you have pressed the  OK button in the Plot window, the printer will construct a print
preview.
Using Adobe Photoshop
1. Select File  > Page Setup  > Printer , select your printer and click  OK.
130 Chapter 12   Practical printing examples ENWW
Printing examples
 

2.Choose from the available paper sizes.
If you do not find the paper size 
that you intend to use, select Printer > Properties > Paper/
Quality > Custom  > Paper Size. Enter the width, the length and the name of your custom
paper size. Press the  Save and OK  buttons.
3.Select File  > Print with Preview .
ENWW Print a presentation
131
Printing examples
 

4.Select Print > Properties . In the Document Properties window, select Paper Source, Paper
Type  and Print Quality.
5.In the Color  tab, the default color management option is  Printer Managed Colors, and this is
the correct option because  you have already selected Let Printer Determine Colors  in
Photoshop.
Print and scale from Microsoft Office
This section demonstrates how to print and scale from Microsoft Office.
132 Chapter 12   Practical printing examples ENWW
Printing examples