HP Color LaserJet Enterprise CM4540f MFP User Manual

							Table 2-14  Embedded Jetdirect Menu /EIO  Jetdirect Menu (continued)
First level Second levelThird levelFourth level Values
  IPV6 SettingsEnable  Off
On*
   AddressManual SettingsEnable
Address
   DHCPV6 Policy Router Specified
Router Unavailable*
Always
   Primary DNS  
   Secondary DNS  
Security Secure Web  HTTPS Required *
HTTPS Optional
  IPSEC  Keep
Disable*
  802.1X  Reset
Keep*
  Reset Security  Yes
No*
Diagnostics Embedded TestsLAN HW Test  Yes
No*
   HTTP Test Yes
No*
   SNMP Test Yes
No*
   Data Path Test Yes
No*
   Select All Tests Yes
No*
   Execution Time [M] Range: 1 – 60 hours
Default = 1 hour
ENWW Administration menu
41
 
						

							Table 2-14  Embedded Jetdirect Menu /EIO  Jetdirect Menu (continued)
First level Second levelThird levelFourth level Values
   Execute No*
Yes
Link Speed    Auto *
10T Half
10T Full
100TX Half
100TX Full
Troubleshooting menu
To display : At the product control panel, select the  Administration menu, and then select the
Troubleshooting menu.
In the following table, asterisks (*)  indicate the factory default setting.
Table 2-15  Troubleshooting menu
First level Second levelThird levelFourth level Values
Event Log    View *
Print
Paper Path Page    View *
Print
Fax Fax T.30 TracePrint T.30 Report When to Print Report Print
Never automatically
print*
Print after every fax
Print only after fax send
jobs
Print after any fax error
Print only after fax send
errors
Print only after fax receive
errors
Save
  Fax V.34  Normal *
Off
42 Chapter 2   Control panel menus ENWW
 
						

							Table 2-15  Troubleshooting menu (continued)
First level Second levelThird levelFourth level Values
  Fax Speaker Mode  Normal *
Diagnostic
Print Quality Pages PQ Troubleshooting Pages  Print
  Diagnostic Page  Print
  Color Band TestPrint Test Page  Print
   Copies Range: 1 – 30
Diagnostic Tests Disable Cartridge Check    
  Paper Path SensorsSelect from a list of the
product sensors.  
  Paper Path TestTest Page  Print
   Source Select from a list of the
available trays.
   Destination Select from a list of the
available bins.
   Duplex Off*
On
   Copies 1*
10
50
100
500
   Stacking Off
On
  Manual Sensor Test  Select from a list of
available components.
  Tray/Bin Manual Sensor
Test 
 Select from a list of
available components.
  Component Test  Select from a list of
available components.
  Print/Stop Test  Range:  0 – 60,000
  Scanner Tests  Select from a list of
available components.
ENWW Administration menu
43