HP Color LaserJet CM2320nf User Manual

Color copies or black and white copies (Mono)
1.On the product control panel, press  Setup, and then press  OK.
2. Use the arrow buttons to select  Copy setup, and then press  OK
3. Use the arrow buttons to select  Advanced, and then press  OK
4. Use the arrow buttons to select  Color Copy, and then press  OK
5. Use the arrow buttons and select  On or  Off . When set to  Off, the control panel displays  Color
copy restricted  if Start Copy Color  is pressed.
6. Press  OK.
Copy settings
Copy quality
Five...

Clean the scanner glass
Dirt, fingerprints, smudges, hair and other marks on the scanner glass slows scanner performance and
affects the accuracy of special features such as fit-to-page and copy. To improve the quality of your
copies and scans, clean the scanner glass. See 
Clean the scanner glass on page 195.
Adjust the lighter/darker (contrast) setting
The lighter/darker setting affects the lightness or darkness (contrast) of the copy. Use the following
procedure to change the contrast for the current...

Considerations for printing or scanning documents with cropped edges:●When the original is smaller than the output size, move the original 4 mm (1/6 inch) away from the
bottom and right edges of the scanner glass. Recopy or scan in this position.
● When the original is the size of the desired output, make a copy with smaller edges by:
◦Select 
Reduce/Enlarge , and press the navigation arrows to select  Full Page=91%, then press
Start Copy  Black  or Start Copy  Color .
Copy onto media of different types...

Change the media size and type for the current job
NOTE:Change the default media size and type settings to change the media size and type.
1.On the product control panel, press  Copy Features.
-or-
For products with a graphical display, press  Copy Menu, then use the arrow keys to select
Options , and then press  OK.
2. Use the arrow buttons to select  Copy Paper, and then press  OK.
3. Use the arrow buttons to select a media size, and then press  OK.
4. Use the arrow buttons to select a media type, and...

Copy a book
1.Lift the lid and place the book on the flatbed scanner with the page that you want to copy at the
upper-left corner of the glass.
2.Gently close the lid.
ENWW Copy a book 83
 

3.Gently press down on the lid to press the book to the flatbed scanner surface.
CAUTION: Pressing on the flatbed cover with too much force can break the lid hinges.
4.Press  Start Copy .
Copy photos
NOTE:Photographs should be copied from the product flatbed scanner, not from the automatic
document feeder (ADF).
1. Place the photo on the flatbed scanner, picture-side down at the corner indicated by the icon on
the scanner.
2.Gently close the lid.
3. Adjust the copy quality settings on the product as...

Copy mixed-size originals
Use the flatbed scanner when making copies of mixed-size originals. Do not use the ADF.
Duplex (two-sided) copy jobs
Copy two-sided documents automatically (HP Color LaserJet CM2320 MFP
Memory-Card Model only)
Make two-sided copies from one-sided documents1.Load the documents to be copied into the automatic document feeder (ADF) input tray with the first
page facing up, and with the top of the page leading into the ADF.
2.On the product control panel, press  Copy Menu.
3. Use...

Make two-sided copies from two-sided documents1.Load the documents to be copied into the automatic document feeder (ADF) input tray with the first
page facing up, and with the top of the page leading into the ADF.
2.On the product control panel, press  Copy Menu.
3. Use the arrow buttons to select  Options, and then press  OK.
4. Use the arrow buttons to select  Copy 2-sided, and then press  OK.
5. Use the arrow buttons to select  2-sided to 2-sided, and then press OK.
6. Press  Start Copy Black  or...

Copy two-sided documents manually
Set the multiple-page flatbed copy settingThe multiple-page flatbed copy setting must be set to  On before the product will produce two-sided
copies from the flatbed scanner.
1. On the product control panel, press  Setup.
2. Use the arrow buttons to select  Copy setup, and then press  OK.
3. Press  OK to select  Default Multi-page .
4. Use the arrow buttons to select  On or  Off.
5. Press  OK to save the selection.
NOTE: The factory-set default for automatic copy...

88 Chapter 9   CopyENWW