HP Color LaserJet CM2320nf User Manual

Use features in the Macintosh printer driver
Print
Create and use printing presets in Macintosh
Use printing presets to save the current printer driver settings for reuse.
Create a printing preset 1.On the  File menu, click  Print.
2. Select the driver.
3. Select the print settings.
4. In the  Presets  box, click  Save As... , and type a name for the preset.
5. Click  OK.
Use printing presets 1.On the  File menu, click  Print.
2. Select the driver.
3. In the  Presets  box, select the printing preset...

Use watermarks
A watermark is a notice, such as “Confidential,” that is printed in the background of each page of a
document.
1.On the  File menu, click  Print.
2. Open the  Watermarks  menu.
3. Next to  Mode, select the type of watermark to use. Select  Watermark to print a semi-transparent
message. Select  Overlay to print a message that is not transparent.
4. Next to  Pages, select whether to print the watermark on all pages or on the first page only.
5. Next to  Text, select one of the standard...

Print on both sides of the page (duplex printing)
Use automatic duplex printing1.Insert enough paper into one of the trays to accommodate the print job. If you are loading special
paper such as letterhead, load it in one of the following ways:
●For tray 1, load the letterhead paper face-up with the bottom edge feeding into the printer first.
● For all other trays, load the letterhead paper face-up with the top edge at the back of the tray.
CAUTION:
To avoid jams when duplexing, only load paper that is...

Scan
For more information about tasks and settings described in this section, see the HP Director online Help.
Scanning tasks
To scan to a software program, scan an item using the program itself. Any TWAIN-compliant program
can scan an image. If the program is not TWAIN-compliant, save the scanned image to a file then place,
open, or import the file in the software program.
Use page-by-page scanning 1.Lift the flatbed scanner lid and load the original that is to be scanned face-down on the flatbed...

4.To include a fax cover page, select  Use Cover Page, and then enter the cover page subject and
message (optional).
5. Click  Fax.
Photo
In HP Director, click the  Photo icon to launch the Photosmart Essential software. Use the software to
import photos from a memory card, edit photos, and print photos from the PC.
ENWW Use features in the Macintosh printer driver 43
 

44 Chapter 4   Use the product with Macintosh ENWW
 

5 Connectivity
●Supported network operating systems
●
USB connection
●
Printer sharing disclaimer
●
Supported network protocols
●
Install the product on a network
●
Configure the network product
NOTE: Configuring TCP/IP settings is complicated and should be performed only by experienced
network administrators. BOOTP will require a server to configure specific TCP/IP settings for the
product. DHCP will also require a server, but the TCP/IP settings will not be fixed for the product. Finally,
the manual...

Supported network operating systems
The following operating systems support network printing:Full software installation
● Windows XP (32-bit and 64-bit)
● Windows Vista (32-bit and 64-bit)
● Mac OS X v10.3, v10.4, and later
Print and scan driver
●Windows 2000
● Windows 2003 Server (32-bit and
64-bit)
Printer driver only
●Linux (Web only)
● UNIX model scripts (Web only)
USB connection
NOTE:
Do not connect the USB cable before installing the software. The installation program will notify
you when the USB...

Printer sharing disclaimer
HP does not support peer-to-peer networking, as the feature is a function of Microsoft operating systems
and not of the HP printer drivers. Go to Microsoft at 
www.microsoft.com.
Supported network protocols
The product supports the TCP/IP network protocol. It is the most widely used and accepted networking
protocol. Many networking services utilize this protocol. This product also supports IPv4 and IPv6. The
following tables list the networking services/protocols that are...

Service nameDescription
BOOTP (bootstrap protocol)For Automatic IP address assignment. BOOTP server
provides the product with an IP address. Requires
administrator to input the product MAC hardware address on
BOOTP server in order for product to obtain an IP address from
that server.
Auto IP For Automatic IP address assignment. If neither a DHCPserver nor a BOOTP server is present, this service allows the
product to generate a unique IP address.
Install the product on a network
In this configuration,...