HP Color LaserJet 3600dn User Manual

							Laser statement for Finland
Luokan 1 laserlaite
Klass 1 Laser Apparat
HP Color LaserJet 3000, 3000n, 3000dn, 3000dtn, 3600, 3600n, 3600dn, 3800, 3800n,
3800dn, 3800dtn, laserkirjoitin on käyttäjän kannalta turvallinen luokan 1 laserlaite.
Normaalissa käytössä kirjoittimen suojakot elointi estää lasersäteen pääsyn laitteen
ulkopuolelle. Laitteen turvallisuusluokka on  määritetty standardin EN 60825-1 (1994)
mukaisesti.
VAROITUS !
Laitteen käyttäminen muulla kuin  käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän
turvallisuusluokan 1 ylittävälle  näkymättömälle lasersäteilylle.
VARNING !
Om apparaten används på annat sätt än i br uksanvisning specificerats, kan användaren
utsättas för osynlig laserstrålning, so m överskrider gränsen för laserklass 1.
HUOLTO
HP Color LaserJet 3000, 3000n, 3000dn,  3000dtn, 3600, 3600n, 3600dn, 3800, 3800n,
3800dn, 3800dtn -kirjoittimen sisällä ei ole käyttäjän huollettavissa olevia kohteita. Laitteen
saa avata ja huoltaa ainoastaan sen huoltamiseen koulutettu henkilö. Tällaiseksi
huoltotoimenpiteeksi ei katsota väriainekase tin vaihtamista, paperiradan puhdistusta tai
muita käyttäjän käsikirjassa luet eltuja, käyttäjän tehtäväksi tarkoitettuja ylläpitotoimia, jotka
voidaan suorittaa ilman erikoistyökaluja.
VARO !
Mikäli kirjoittimen suojakotelo avataan, olet  alttiina näkymättömällelasersäteilylle laitteen
ollessa toiminnassa. Älä katso säteeseen.
VARNING !
Om laserprinterns skyddshölje öppnas då appar aten är i funktion, utsättas användaren för
osynlig laserstrålning. Betrakta ej strålen.  Tiedot laitteessa käytettävän laserdiodin
säteilyominaisuuksista: Aallonpituus 775-795 nm Teho 5 m W Luokan 3B laser.
ENWW Safety statements 197
 
						

							198 Appendix D   Regulatory informationENWW
 
						

							E Working with memory
Printer memory
NOTEThe information in this appendix pertains to the HP Color LaserJet 3000 and 3800 Series
printers only.
The HP Color LaserJet 3000 and 3800 Series printers have one dual inline memory module (DIMM)
slot. Use the DIMM slot to upgrade th e printer with the following items:
● More printer memory — DIMMs are available in 128, 256, and 512 MB
● Other DIMM-based printer la
nguages and printer options
NOTESingle in-line memory module s (SIMMs) used on previous HP LaserJet printers are not
compatible with  the printer.
NOTETo order DIMMs, see Supplies and accessories .
You might want to add more memory to the printer  if you often print complex graphics or PostScript
documents, or if you use many do wnloaded fonts. Additional memory also allows the printer to print
multiple collate d copies at the maximum speed.
Before ordering additional memory, see how much  memory is currently installed by printing a
configuration page. See 
Using printer information pages .
ENWW Printer memory 199
 
						

							Installing memory DIMMs
You can install more memory for the printer, and you can also install a font DIMM to allow the printer to
print characters for lan guages such as Chinese or  the Cyrillic alphabet.
CAUTIONStatic electricity can damage DIMMs. When handling DIMMs, either wear an
antistatic wrist strap, or freque ntly touch the surface of the DI MM antistatic package and then
touch bare metal on the printer.
To install memory and font DIMMs
1. Turn the printer off, and then disconnect all power and interface cables.
2.On the right side of the printer, gently pull th e black tabs together, and then pull the formatter
assembly from the printer.
200 Appendix E   Working with memory ENWW
 
						

							3.Place the formatter board on a clean, flat, grounded surface.
To replace a DIMM that is currently installed, sp read the latches apart on each side of the DIMM
slot, lift the DIMM up at an angle, and pull it out.
4. Remove the new DIMM from the antistatic package , and then locate the alignment notch on the
bottom edge of the DIMM.
5. Holding the DIMM by the edges, align the notch on  the DIMM with the bar in the DIMM slot at an
angle and firmly press the DIMM into the slot until  it is fully seated. When installed correctly, the
metal contacts are not visible.
ENWW Installing memory DIMMs 201
 
						

							6.Push down on the DIMM until both latches engage the DIMM.
NOTE If you have difficulty inserting the DIMM, make sure that the notch on the bottom of
the DIMM is aligned with the bar in the slot. If the DIMM still does not go in, make sure that
you are using the correct DIMM type.
7. Align the edge of the formatter boar d in the tracks at the top and bottom of the slot, and then slide
the board back into the printer. Push the formatter firmly until you hear the formatter latches click
into place.
8. Reconnect the power cable and USB or netw ork cable, and then turn on the printer.
9. After installing a  memory DIMM, see 
Enabling memory.
Enabling memory
If you installed a memory DIMM, set the printer driver to recognize the newly added memory.
To enable memory  for Windows
1.On the  Start menu, point to  Settings, and click  Printers or Printers and Faxes .
2. Select this prin ter and select Properties.
3. On the  Configure  tab, click More.
4. In the  Total Memory  field, type or select the total amount of memory that is now installed.
202 Appendix E   Working with memory ENWW
 
						

							5.Click  OK.
6. Go to 
Checking DIMM installation .
Checking DIMM installation
Check that the DIMMs are installed correctly and working.
To check DIMM installation
1.Turn the printer on. Check that the printer is in the  Ready state after the it has gone through the
startup sequence. If an error message appears,  a DIMM may have been incorrectly installed.
2. Print a configuration page. See 
Using printer in formation pages .
3. Check the Installed Personalities and Options se ction on the configuration page and compare it
with the configuration page printed before the DIMM installation.
4. The DIMM may not be installed correctly. Repeat the installation procedure.
-or-
The DIMM may be defective. Try a new DIMM.
ENWW Installing memory DIMMs 203
 
						

							204 Appendix E   Working with memoryENWW
 
						

							Glossary
bidirectional communicationTwo-way data transmission.
bin A receptacle for holding printed pages.
BOOTP Abbreviation for “Bootstrap Protocol,” an Internet prot ocol that a computer uses to find its IP address.
calibration The process in which the printer makes internal  adjustments to produce the best print quality.
chooser A Macintosh accessory that you use to select a device.
control panel The area on the printer that contains buttons and a display screen. Use the control panel to set
printer settings and to get info rmation about the printer status.
default The normal or standard setting for hardware or software.
DHCP Abbreviation for “dynamic host configuration protoc ol.” Individual computers or peripherals that are
connected to a network use DHCP to find their own  configuration information, including the IP address.
DIMM Abbreviation for “dual inline memory module.” A small circuit board that holds memory chips.
duplex A feature that accommodates printing on both sides of a sheet of paper. Also called “2-sided printing.”
EIO Abbreviation for “enhanced input/output.” A hardware in terface that is used to add a print server, network
adaptor, hard disk, or other plug-in item for HP printers.
Emulated PostScript Software that emulates Adobe PostScript,  a programming language that describes the
appearance of the printed page. This printer language appears as “PS” in many menus.
EPS Abbreviation for “encapsulated Post Script,” a type of graphics file.
firmware Programming instructions that are stored in  a read-only memory unit inside the printer.
font A complete set of letters, numerals, and symbols in a typeface.
fuser The assembly that uses heat to fuse the toner onto the print media.
grayscale Various shades of gray.
halftone pattern A halftone pattern uses differing sizes of ink dots to produce a continuous-tone image such as
a photograph.
HP Easy Printer Care Software Software that provides the ability to track and maintain printers from your
computer desktop.
HP Jetdirect An HP product for network printing.
HP Web Jetadmin An HP-trademarked Web-based printer control software that you can use on a computer to
manage any peripheral that is connec ted to an HP Jetdirect print server.
ENWW Glossary 205
 
						

							I/OAbbreviation for “input/output,” refers to computer-port settings.
IP address The unique number assigned to a computer  device that is connected to a network.
IPX/SPX Abbreviation for “internetwork packet exchange/sequenced packet exchange.”
macro A single keystroke or command that results  in a series of actions or instructions.
media The paper, labels, transparencies, or other ma terial on which the printer prints the image.
memory tag A memory partition that has a specific address.
monochrome Black and white. Devoid of color.
network A system of computers interconnected by telephone wi res or other means in order to share information.
network administrator A person who manages a network.
page buffer Temporary printer memory used to hold page data while the printer creates an image of the page.
PCL Abbreviation for “Printer Control Language.”
peripheral An auxiliary device, such as a printer, modem, or  storage system, that works in conjunction with a
computer.
personality Distinctive features or characterist ics of a printer or printer language.
pixel Abbreviation for “picture element,” the smallest  unit of area in an image displayed on a screen.
PJL Abbreviation for “printer job language.”
PostScript A trademarked page-description language.
PPD Abbreviation for “PostScript printer description.”
printer driver A software program that a computer uses to gain access to printer features.
RAM Abbreviation for “random access memory,” a type of co mputer memory that stores data that can change.
raster image An image composed of dots.
render The process of producing text or graphics.
ROM Abbreviation for “read-only memory,” a type of comput er memory that stores data that should not change.
supplies Materials that the printer uses and that must be repl aced. Supply items for this printer are the four print
cartridges.
TCP/IP An internet protocol that has become the global standard for communications.
toner The fine black or colored powder that forms the image on the printed media.
transfer unit The black plastic belt that transports media insi de the printer and transfers toner from the print
cartridges onto the media.
tray The receptacle that holds blank paper.
206 Glossary ENWW