HP C4280 User Manual

6.In the  Paper Type  drop-down list, click  More, and then select  HP CD/DVD tattoo
paper  from the list.
7. Click  OK, and then click  Print or OK  in the  Print dialog box.
Print using  Maximum dpi
Use Maximum dpi  mode to print high-quality, sharp images.
To get the most benefit from  Maximum dpi mode, use it to print high-quality images such
as digital photographs. When you select the  Maximum dpi setting, the printer software
displays the optimized dots per inch (dpi) that the HP All-in-One will...

4.Click the button that opens the  Properties dialog box.
Depending on your software application, this button might be called  Properties,
Options , Printer Setup , Printer , or Preferences .
5. Click the  Features  tab.
6. In the  Paper saving options  area, select Manual from the  Two-sided printing  drop-
down list.
7. For binding, do one of the following:
• For binding on the top like a notebook or calendar, select the  Flip Pages Up check
box.
This causes the odd and even pages of your document to...

Print a multiple-page document as a booklet
The HP All-in-One allows you to print your document as a small booklet, which you can
fold and then staple together.
For best results, design your document to fit on a multiple of four pages, such as an 8,
12, or 16-page program for a childs school play or for a wedding.
To print a multiple-page document as a booklet
1.Load paper into the input tray.
The paper should be thick enough that the images do not show through to the other
side.
2. On the  File menu in...

10.Follow the instructions that appear on your screen for reloading the paper to print on
the second side, and then click  Continue.
11. When the entire document has finished printing, fold the stack of paper in half, so that
the first page is on top, then staple the document along the crease.
TIP: For best results, use a saddle stapler, or a heavy-duty stapler with a long
reach to staple the booklet.
Figure 7-1 Left-edge  binding for left-to-right languages
Figure 7-2 Right-edge binding  for...

7.If you want a border to appear around each page image printed on the sheet of paper,
select the  Print page borders  check box.
8. In the  Page order  list, click an appropriate page order option.
The sample output graphic is numbered to show how the pages will be ordered if you
select each option.
9. Click  OK, and then click  Print or OK  in the  Print dialog box.
Print a multiple-page doc ument in reverse order
Because of the way the paper feeds through the HP All-in-One, the first page that...

6.In the  Layout Options  area, select Front to Back  in the Page Order  option.
NOTE:If you set your document to print on both sides of the page, the  Front to
back  option is not available. Your document will automatically print in the correct
order.
7. Click  OK, and then click  Print or OK  in the  Print dialog box.
When you are printing multiple copies, each set is printed completely before the next
set is printed.
Reverse an image for iron-on transfers
This feature reverses an image so you can use...

6.In the  Paper Type  drop-down list, click  More, and then select the appropriate paper
type.
TIP: If you want to make notations on the back of the transparencies and erase
them later without scratching the original, click the  Advanced tab, and select
the  Mirror Image  check box.
7.In the  Resizing Options  area, click an appr opriate size in the Size list.
8. Click  OK, and then click  Print or OK  in the  Print dialog box.
The HP All-in-One automatically waits for transparencies to dry before...

Print a poster
You can create a poster by printing a document on multiple pages. The HP All-in-One
prints dotted lines on some pages to indicate where to trim the pages before taping them
together.
To print a poster
1.Make sure you have paper loaded in the input tray.
2. On the  File menu in your software application, click  Print.
3. Make sure the HP All-in-One is the selected printer.
4. Click the button that opens the  Properties dialog box.
Depending on your software application, this button might...

To print a Web page
1.Make sure you have paper loaded in the input tray.
2. On the  File menu in your Web browser, click  Print.
The  Print  dialog box appears.
3. Make sure the HP All-in-One  is the selected printer.
4. If your Web browser supports it, select the items on the Web page that you want to
include in the printout.
For example, in Internet Explorer, click the  Options tab to select options such as  As
laid out on screen , Only the selected frame , and Print all linked documents .
5. Click...

3.Double-click the HP All-in-One icon.
TIP: You can also double-click the printer icon in the Windows taskbar.
4.Select the print job you want to cancel.
5. On the  Document  menu, click  Cancel Printing  or Cancel , or press the  Delete key
on your keyboard.
It can take a few moments for printing to be cancelled.
Stop a print job 47
Print