Honeywell Hrhd 9 User Manual

Configuration
Document 900.0856
 Rev B41
02/08
CautionThe USB device must be FAT16 or FAT32 format.
7. You can import saved DVR settings or export the current DVR settings. To import 
saved DVR settings:
a. Connect the USB device containing the setup file (.dat) to the DVR.
b. Highlight Setup – Import… and press  .
c. Select the desired setup file and press Import to import the selected settings 
and change the DVR settings accordingly.
d. Highlight Include Network Setup and press   to toggle between On...

Configuration
42
Figure 3-10 System Log Screen
The System Log screen lists system activities (up to 5,000 from the latest activity) 
that have occurred along with the time and date. The   icon will be displayed in 
the last column for system activities of the remote site. You can scroll through the 
log pages by using the Up and Down arrows, or you can go directly to a log page 
by entering the log page number in the box at the bottom-left of the screen. 
Highlight Close and press   to exit the screen....

Configuration
Document 900.0856
 Rev B43
02/08
Figure 3-11 Date/Time Setup Screen
2. Highlight the first box beside Date and press  . The individual sections of the 
date will highlight. Use the Up and Down arrow buttons to change the number. 
Use the Left and Right arrow buttons to move between month, date and year. 
Once you have the correct date, press  .
3. Highlight the Format box beside Date and press  . Select from the three 
available date formats and press  to save your selected format.
4....

Configuration
44
Figure 3-12 Holiday Setup Screen
9. You can set up holidays by highlighting + and pressing  . The current date 
appears.
10. Highlight the month and day and change them by using the Up and Down arrow 
buttons. Press   to add the date. Dates can be deleted by highlighting   
beside the date and pressing  .
NoteHolidays that do not fall on the same date each year should be 
updated once the current year’s holiday has passed.
11. Highlighting the Time Sync tab causes the Time Sync screen to...

Configuration
Document 900.0856
 Rev B45
02/08
NoteYou can use the domain name instead of an IP address if you 
already set up the DVRNS Server when setting up the LAN.
14. Highlight the box beside Interval and press  . Set the time interval for 
synchronization from 30 minutes to 1 day at various time intervals.
Last Sync-Time displays the last time the DVR was synchronized with the time 
server.
15. Highlight Run as Server and press  . Pressing   toggles between On and 
Off. When it is On, the DVR you...

Configuration
46
Figure 3-15 Device Format Screen
NoteA USB hard disk drive can be formatted and used only for 
archiving.
NoteThe DVR does NOT support USB hard disk drives with a version 
lower than 2.0.
NoteSystem upgrades require formatting internal hard disk drives, so 
do not uninstall internal hard disk drives even though they are 
not used for either recording or archiving; for example, when 
using only external SCSI hard disk drives. Set the Use As for the 
internal hard disk drive to Not Using...

Configuration
Document 900.0856
 Rev B47
02/08
NoteWhen disconnecting a USB hard disk drive from the DVR, 
highlight Don’t Use first and then disconnect the device.
CautionDo NOT disconnect the USB cable or the power from the device 
while copying video clips. If the USB cable is disconnected while 
copying video clips, archived data might be lost.
6. Highlight the Status tab, and the Storage Status screen (Figure 3-17) displays.
Figure 3-17 Storage Status Screen
The Type column displays the type of...

Configuration
48
NoteTemperature and S.M.A.R.T. information will be available only 
for IDE hard disk drives supporting the SMART (Self-Monitoring 
Analysis and Reporting Technology) monitoring program.
7. Selecting Close and pressing   exits the screen.
User Setup Screen
1. Highlight User in the System menu and press  . The User setup screen 
(Figure 3-18) displays the authorized groups and users. You can add and delete 
groups and users. When adding a group, you can assign authority levels to the...

Configuration
Document 900.0856
 Rev B49
02/08
4. Highlighting a User Name and pressing   allows you to add or change the 
password assigned to that user. You can also change the group to which the user 
is assigned.
5. The   column can be used to delete a User Name or an entire Group. If the   
is grayed out, that Group or User cannot be deleted. Highlight the   and press 
. You will be asked to confirm that you want to delete the User or Group. To 
delete the User currently logged into the DVR on a...

Configuration
50
System Check — The user can view the remote system status or check the 
remote system status as a batch process on a PC running RAS.
Record Setup — The user can establish all Record settings on a local system 
or a PC running RAS.
Search — The user can access Search mode on a local system or a PC 
running RAS.
Clip-Copy — The user can copy video clips on a local system or a PC 
running RAS, and save video data in an AVI, bitmap or JPEG file format.
8. To add a User, highlight the + User…...