Honeywell 1900ghd-2 User Manual

							2 - 5
Verifone® Ruby Terminal Default Settings
Scan the following Plug and Play code to program the scanner for a Verifone Ruby terminal.  This bar code sets the baud rate to 
1200 bps and the data format to 8 data bits, mark parity bit, 1 stop bit.  It also adds a line feed (LF) suffix and programs the fol-
lowing prefixes for each symbology:
Gilbarco® Terminal Default Settings
Scan the following Plug and Play code to program the scanner for a Gilbarco terminal.  This bar code sets the baud rate to 2400 
bps and the data format to 7 data bits, even parity, 2 stop bits.  It also adds a carriage return (CR) suffix and programs the follow-
ing prefixes for each symbology:
Honeywell Bioptic Aux Port Configuration
Scan the following Plug and Play code to program the scanner for a Honeywell bioptic scanner auxiliary port configuration.  This 
bar code sets the baud rate to 38400 bps and the data format to 8 data bits, no parity, 1 stop bit.  
SymbologyPrefix
UPC-A A
UPC-E A
EAN-8 FF
EAN-13 F
SymbologyPrefix
UPC-A A
UPC-E E0
EAN-8 FF
EAN-13 F
ReM On
Verifone Ruby Settings
Gilbarco Settings
Honeywell Bioptic Settings 
						

							2 - 6
Datalogic™ Magellan® Aux Port Configuration
Scan the following Plug and Play code to program the scanner for a Datalogic Magellan auxiliary port configuration.  This bar 
code sets the baud rate to 9600 bps and the data format to 8 data bits, no parity, 1 stop bit.  
NCR Bioptic Aux Port Configuration
Scan the following Plug and Play code to program the scanner for an NCR bioptic scanner auxiliary port configuration.  The fol-
lowing prefixes are programmed for each symbology:
Wincor Nixdorf Terminal Default Settings
Scan the following Plug and Play code to program the scanner for a Wincor Nixdorf terminal.  This bar code sets the baud rate 
to 9600 bps and the data format to 8 data bits, no parity, 1 stop bit.  
SymbologyPrefixSymbologyPrefix
UPC-A A Interleaved 2 of 5 b
UPC-E E0 Code 128 f
GS1 DataBar 
Omnidirecitonalr
EAN-8 FF GS1 DataBar 
Expandedr
EAN-13 F Codabar N
Code 39 a Code 32 
Pharmaceutical 
(PARAF)a
Datalogic Magellan Settings
NCR Bioptic Settings
Wincor Nixdorf Terminal Settings 
						

							2 - 7
Wincor Nixdorf Beetle™ Terminal Default Settings
Scan the following Plug and Play code to program the scanner for a Wincor Nixdorf Beetle terminal.  The following prefixes are 
programmed for each symbology:
Wincor Nixdorf RS232 Mode A
Scan the following Plug and Play code to program the scanner for a Wincor Nixdorf RS232 Mode A terminal.  This bar code sets 
the baud rate to 9600 bps and the data format to 8 data bits, odd parity, 1 stop bit.  The following prefixes are programmed for 
each symbology:
Note: This setting is not supported in Granit devices.
SymbologyPrefixSymbologyPrefix
Aztec Code V Interleaved 2 of 5 I
Codabar N MaxiCode T
Code 93 L MicroPDF417 S
Code 128 K PDF417 Q
Data Matrix R QR Code U
EAN-8 B Straight  2 of 5 IATA H
EAN-13 A UPC-A A0
GS1 DataBar E UPC-E C
GS1-128 P All other bar codes M
SymbologyPrefixSymbologyPrefix
Code 128 K EAN-13 A
Code 93 L GS1-128 K
Codabar N Interleaved 2 of 5 I
UPC-A A0 Plessey O
UPC-E C Straight 2 of 5 IATA H
EAN-8 B GS1 DataBar E
All other bar codes M
Wincor Nixdorf Beetle Settings
Wincor Nixdorf RS232 Mode A 
Settings 
						

							2 - 8
Keyboard Country Layout
If your interface is USB Keyboard or Keyboard Wedge, your keyboard layout default is a US keyboard.  To change this layout, 
scan the appropriate Keyboard Country bar code below.  By default, national character replacements are used for the follow-
ing characters:  #  $  @  [  \  ]  ^  ‘  {  |  }  ~.  Refer to the ISO 2022/ISO 646 Character Replacements on page A-7 to view the 
character replacements for each country. 
Keyboard Countries
* United States 
Albania
Azeri (Cyrillic)
Azeri (Latin)
Belarus
Belgium
Bosnia
Brazil
Brazil (MS)
Bulgaria (Cyrillic) 
						

							2 - 9
Keyboard Countries (Continued)
Bulgaria (Latin)
Canada (French legacy)
Canada (French)
Canada (Multilingual)
Croatia
Czech
Czech (Programmers)
Czech (QWERTY)
Czech (QWERTZ)
Denmark
Dutch (Netherlands) 
						

							2 - 10
Keyboard Countries (Continued)
Estonia
Faroese
Finland
France
Gaelic
Germany
Greek
Greek (220 Latin)
Greek (220)
Greek (319 Latin)
Greek (319) 
						

							2 - 11
Keyboard Countries (Continued)
Greek (Latin)
Greek (MS)
Greek (Polytonic)
Hebrew
Hungarian (101 key)
Hungary
Iceland
Irish
Italian (142)
Italy
Japan ASCII 
						

							2 - 12
Keyboard Countries (Continued)
Kazakh
Kyrgyz (Cyrillic)
Latin America
Latvia
Latvia (QWERTY)
Lithuania
Lithuania (IBM)
Macedonia
Malta
Mongolian (Cyrillic)
Norway 
						

							2 - 13
Keyboard Countries (Continued)
Poland
Polish (214)
Polish (Programmers)
Portugal
Romania
Russia
Russian (MS)
Russian (Typewriter)
SCS
Serbia (Cyrillic)
Serbia (Latin) 
						

							2 - 14
Keyboard Countries (Continued)
Slovakia
Slovakia (QWERTY)
Slovakia (QWERTZ)
Slovenia
Spain
Spanish variation
Sweden
Switzerland (French)
Switzerland (German)
Tatar
Turkey F