Honeywell 1900ghd-2 User Manual

							14 - 5
Is the scanner having trouble reading your symbols?
If the scanner isn’t reading symbols well, check that the symbols:
 Aren’t smeared, rough, scratched, or exhibiting voids.
 Aren’t coated with frost or water droplets on the surface.
 Are enabled in the base or Access Point to which the scanner connects.
Is the bar code displayed but not entered into the application?
The bar code is displayed on the host device correctly, but you still have to press a key to enter it (the Enter/Return key or 
the Tab key, for example).
 You need to program a suffix.  Programming a suffix enables the scanner to output the bar code data plus the key you 
need (such as “CR”) to enter the data into your application.  Refer to Prefix/Suffix Overviewon page 6-1 for further 
information.
Does the scanner read the bar code incorrectly?
If the scanner reads a bar code, but the data is not displayed correctly on the host screen:
 The base or Access Point may not be programmed for the appropriate terminal interface.  For example, you scan “12345” 
and the host displays “@es%.”
Reprogram the base/Access Point with the correct Plug and Play bar code.  See Programming the Interfacebeginning on 
page 2-1.
 The bas or Access Point may not be programmed to output your bar code data properly.  For example, you scan “12345” 
and the host displays “A12345B.”
Reprogram the base/Access Point with the proper symbology selections.  See Chapter 8.
The scanner won’t read your bar code at all.
 Scan the sample bar codes in the back of this manual.  If the scanner reads the sample bar codes, check that your bar 
code is readable.
Verify that your bar code symbology is enabled (see Chapter 8).  
If the scanner still can’t read the sample bar codes, scan All Symbologieson page 8-1. 
						

							14 - 6 
						

							15 - 1
15
Customer Support
Technical Assistance
If you need assistance installing or troubleshooting your device, please contact us by using one of the methods below:
Knowledge Base: www.hsmknowledgebase.com
Our Knowledge Base provides thousands of immediate solutions. If the Knowledge Base cannot help, our Technical Support 
Portal (see below) provides an easy way to report your problem or ask your question.
Technical Support Portal: www.hsmsupportportal.com
The Technical Support Portal not only allows you to report your problem, but it also provides immediate solutions to your techni-
cal issues by searching our Knowledge Base.  With the Portal, you can submit and track your questions online and send and 
receive attachments. 
Web form: www.hsmcontactsupport.com
You can contact our technical support team directly by filling out our online support form.  Enter your contact details and the 
description of the question/problem.
Telephone: www.honeywellaidc.com/locations
For our latest contact information, please check our website at the link above.
Product Service and Repair
Honeywell International Inc. provides service for all of its products through service centers throughout the world.  To obtain war-
ranty or non-warranty service, please visit www.honeywellaidc.com and select Support > Contact Service and Repair to see 
your regions instructions on how to obtain a Return Material Authorization number (RMA #).  You should do this prior to return-
ing the product.
Limited Warranty
Honeywell International Inc. (HII) warrants its products to be free from defects in materials and workmanship and to conform to 
HII’s published specifications applicable to the products purchased at the time of shipment.  This warranty does not cover any 
HII product which is (i) improperly installed or used; (ii) damaged by accident or negligence, including failure to follow the proper 
maintenance, service, and cleaning schedule; or (iii) damaged as a result of (A) modification or alteration by the purchaser or 
other party, (B) excessive voltage or current supplied to or drawn from the interface connections, (C) static electricity or electro-
static discharge, (D) operation under conditions beyond the specified operating parameters, or (E) repair or service of the prod-
uct by anyone other than HII or its authorized representatives.
This warranty shall extend from the time of shipment for the duration published by HII for the product at the time of purchase 
(Warranty Period).  Any defective product must be returned (at purchaser’s expense) during the Warranty Period to HII factory 
or authorized service center for inspection.  No product will be accepted by HII without a Return Materials Authorization, which 
may be obtained by contacting HII.  In the event that the product is returned to HII or its authorized service center within the 
Warranty Period and HII determines to its satisfaction that the product is defective due to defects in materials or workmanship, 
HII, at its sole option, will either repair or replace the product without charge, except for return shipping to HII.
EXCEPT AS MAY BE OTHERWISE PROVIDED BY APPLICABLE LAW, THE FOREGOING WARRANTY IS IN LIEU OF ALL 
OTHER COVENANTS OR WARRANTIES, EITHER EXPRESSED OR IMPLIED, ORAL OR WRITTEN, INCLUDING, WITHOUT 
LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR 
NON-INFRINGEMENT.
HII’S RESPONSIBILITY AND PURCHASER’S EXCLUSIVE REMEDY UNDER THIS WARRANTY IS LIMITED TO THE 
REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT WITH NEW OR REFURBISHED PARTS.  IN NO EVENT 
SHALL HII BE LIABLE FOR INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, AND, IN NO EVENT, SHALL ANY 
LIABILITY OF HII ARISING IN CONNECTION WITH ANY PRODUCT SOLD HEREUNDER (WHETHER SUCH LIABILITY 
ARISES FROM A CLAIM BASED ON CONTRACT, WARRANTY, TORT, OR OTHERWISE) EXCEED THE ACTUAL AMOUNT 
PAID TO HII FOR THE PRODUCT.  THESE LIMITATIONS ON LIABILITY SHALL REMAIN IN FULL FORCE AND EFFECT  
						

							15 - 2
EVEN WHEN HII MAY HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH INJURIES, LOSSES, OR DAMAGES.  SOME 
STATES, PROVINCES, OR COUNTRIES DO NOT ALLOW THE EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CONSE-
QUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
All provisions of this Limited Warranty are separate and severable, which means that if any provision is held invalid and unen-
forceable, such determination shall not affect the validity of enforceability of the other provisions hereof.  Use of any peripherals 
not provided by the manufacturer may result in damage not covered by this warranty. This includes but is not limited to: cables, 
power supplies, cradles, and docking stations. HII extends these warranties only to the first end-users of the products.  These 
warranties are non-transferable.
The duration of the limited warranty for the Xenon 1900 and 1910 scanners is five (5) years. 
The duration of the limited warranty for the Xenon 1902 and 1912 scanners and CCB01-010BT Charge Base is three (3) years. 
The duration of the limited warranty for the Granit 1910i and 1911i scanners and CCB02-100BT Charge Base is three (3) years. 
The duration of the limited warranty for the Granit 1980i and 1981i scanners and CCB05-100BT Charge Base is three (3) years. 
The duration of the limited warranty for the Xenon or Granit battery is one (1) year. 
						

							A - 1
A
Reference Charts
Symbology Charts
Note: “m” represents the AIM modifier character.  Refer to International Technical Specification, Symbology Identifiers, for AIM 
modifier character details.
Prefix / Suffix entries for specific symbologies override the universal (All Symbologies, 99) entry.
Refer to Data Editingbeginning on page 6-1 and Data Formattingbeginning on page 7-1 for information about using Code ID 
and AIM ID.
Linear Symbologies
AIMHoneywell
SymbologyIDPossible  modifiers 
(m)IDHex
All Symbologies99
Codabar ]Fm0-1 a 61
Code 11 ]H3 h 68
Code 128 ]Cm0, 1, 2, 4 j 6A
Code 32 Pharmaceutical (PARAF) ]X0 < 3C
Code 39 (supports Full ASCII mode) ]Am0, 1, 3, 4, 5, 7 b 62
TCIF Linked Code 39 (TLC39) ]L2 T 54
Code 93 and 93i ]Gm0-9, A-Z, 
a-mi69
EAN ]Em0, 1, 3, 4 d 64
EAN-13 (including Bookland EAN) ]E0 d 64
EAN-13 with Add-On ]E3 d 64
EAN-13 with Extended Coupon Code ]E3 d 64
EAN-8 ]E4 D 44
EAN-8 with Add-On ]E3 D 44
GS1
GS1 DataBar ]em0y79
GS1 DataBar Limited ]em{ 7B
GS1 DataBar Expanded ]em}7D
GS1-128 ]C1 I 49
2 of 5
China Post (Hong Kong 2 of 5) ]X0 Q 51
Interleaved 2 of 5 ]Im0, 1, 3 e 65
Matrix 2 of 5 ]X0 m 6D
NEC 2 of 5 ]X0 Y 59
Straight 2 of 5 IATA ]Rm0, 1, 3 f 66
Straight 2 of 5 Industrial  ]S0 f 66
MSI ]Mm0, 1 g 67
Telepen ]Bmt74
UPC 0, 1, 2, 3, 8, 9, A, B, C 
						

							A - 2
2D Symbologies
Postal Symbologies
UPC-A ]E0 c 63
UPC-A with Add-On ]E3 c 63
UPC-A with Extended Coupon Code ]E3 c 63
UPC-E ]E0 E 45
UPC-E with Add-On ]E3 E 45
UPC-E1 ]X0 E 45
Add Honeywell Code ID5C80
Add AIM Code ID5C81
Add Backslash5C5C
Batch mode quantity535
AIMHoneywell
SymbologyIDPossible  modifiers 
(m)IDHex
All Symbologies99
Aztec Code ]zm0-9, A-C z 7A
Chinese Sensible Code (Han Xin Code) ]X0 H 48
Codablock A ]O6 0, 1, 4, 5, 6 V 56
Codablock F ]Om0, 1, 4, 5, 6 q 71
Code 49 ]Tm0, 1, 2, 4 l 6C
Data Matrix ]dm0-6 w 77
GS1 ]em0-3 y 79
GS1 Composite  ]em0-3 y 79
GS1 DataBar Omnidirectional ]em0-3 y 79
MaxiCode ]Um0-3 x 78
PDF417 ]Lm0-2 r 72
MicroPDF417 ]Lm0-5 R 52
QR Code  ]Qm0-6 s 73
Micro QR Code ]Qms73
AIMHoneywell
SymbologyIDPossible  modifiers 
(m)IDHex
All Symbologies99
Australian Post ]X0 A 41
AIMHoneywell
SymbologyIDPossible  modifiers 
(m)IDHex 
						

							A - 3
ASCII Conversion Chart (Code Page 1252)
In keyboard applications, ASCII Control Characters can be represented in 3 different ways, as shown below.  The CTRL+X func-
tion is OS and application dependent.  The following table lists some commonly used Microsoft functionality.  This table applies 
to U.S. style keyboards.  Certain characters may differ depending on your Country Code/PC regional settings.  British Post ]X0 B 42
Canadian Post ]X0 C 43
China Post ]X0 Q 51
InfoMail ]X0 , 2c
Intelligent Mail Bar Code  ]X0 M 4D
Japanese Post ]X0 J 4A
KIX (Netherlands) Post ]X0 K 4B
Korea Post ]X0 ? 3F
Planet Code ]X0 L 4C
Postal-4i ]X0 N 4E
Postnet ]X0 P 50
Non-printable            ASCII control 
charactersKeyboard Control + ASCII (CTRL+X) Mode 
Control + X Mode Off (KBDCAS0)
Windows Mode Control + X Mode On (KBDCAS2)
DECHEXCharCTRL + XCTRL + X function
000 NUL Reserved CTRL+ @  
101 SOH NP Enter CTRL+ A Select all
202 STX Caps Lock CTRL+ B Bold
303 ETX ALT Make CTRL+ C Copy
404 EOT ALT Break CTRL+ D Bookmark
505 ENQ CTRL Make CTRL+ E Center
606 ACK CTRL Break CTRL+ F Find
707 BEL Enter / Ret CTRL+ G  
808 BS(Apple Make)CTRL+ H History
909 HT Tab CTRL+ I Italic
100A LF(Apple Break)CTRL+ J Justify
110B VT Tab CTRL+ K hyperlink
120C FF Delete CTRL+ Llist, 
left align
130D CR Enter / Ret CTRL+ M  
140E SO Insert CTRL+ N New
150F SI ESC CTRL+ O Open
1610 DLE F11 CTRL+ P Print
1711 DC1 Home CTRL+ Q Quit
1812 DC2 PrtScn CTRL+ R  
1913 DC3 Backspace CTRL+ S Save
2014 DC4 Back Tab CTRL+ T  
2115 NAK F12 CTRL+ U  
2216 SYN F1 CTRL+ V Paste 
AIMHoneywell
SymbologyIDPossible  modifiers 
(m)IDHex 
						

							A - 4
Lower ASCII Reference Table
Note: Windows Code page 1252 and lower ASCII use the same characters. 
2317 ETB F2 CTRL+ W  
2418 CAN F3 CTRL+ X  
2519 EM F4 CTRL+ Y 
261A SUB F5 CTRL+ Z 
271B ESC F6 CTRL+ [ 
281C FS F7 CTRL+ \ 
291D GS F8 CTRL+ ] 
301E RS F9 CTRL+ ^ 
311F US F10 CTRL+ - 
1277F⌂NP Enter 
Printable Characters
DECHEXCharacterDECHEXCharacterDECHEXCharacter 
32206440@9660`
3321!6541A9761a
34226642B9862b
3523#6743C9963c
3624$6844D10064d
3725%6945E10165e
3826&7046F10266f
39277147G10367g
4028(7248H10468h
4129)7349I10569i
422A*744AJ1066Aj
432B+754BK1076Bk
442C,764CL1086Cl
45 2D-774DM1096Dm
462E.784EN11 06En
472F/794FO1116Fo
483008050P11 270p
493118151Q11 371q
503228252R11 472r
513338353S11 573s
523448454T11 674t
533558555U11 775u
543668656V11 876v
553778757W11 977w
563888858X12078x
573998959Y12179y
583A:905AZ1227Az
593B;915B[1237B{
603C945E^1267E~
Non-printable            ASCII control 
charactersKeyboard Control + ASCII (CTRL+X) Mode 
Control + X Mode Off (KBDCAS0)
Windows Mode Control + X Mode On (KBDCAS2)
DECHEXCharCTRL + XCTRL + X function 
						

							A - 5
633F?955F_1277F⌂
Extended ASCII Characters
DECHEXCP 1252ASCIIAlternate ExtendedPS2 Scan Code
12880€Çup arrow ↑0x48
12981üdown arrow ↓0x50
13082‚éright arrow →0x4B
13183ƒâleft arrow ←0x4D
13284„äInsert0x52
13385…àDelete0x53
13486†åHome0x47
13587‡çEnd0x4F
13688ˆ ê Page Up0x49
13789‰ ë Page Down0x51
1388AŠ è Right ALT0x38
1398B‹ ï Right CTRL0x1D
1408CΔReservedn/a
1418DìReservedn/a
1428EŽ Ä Numeric Keypad Enter0x1C
1438FÅ Numeric Keypad /0x35
14490ÉF10x3B
14591‘æF20x3C
14692’ÆF30x3D
14793“ôF40x3E
14894”öF50x3F
14995•òF60x40
15096–ûF70x41
15197—ùF80x42
15298˜ÿF90x43
15399™ÖF100x44
1549AšÜF110x57
1559BݢF120x58
1569Cœ £ Numeric Keypad +0x4E
1579D¥ Numeric Keypad -0x4A
1589Ež₧Numeric Keypad *0x37
1599FŸƒCaps Lock0x3A
160A0 á Num Lock0x45
161A1¡íLeft Alt0x38
162A2¢óLeft Ctrl0x1D
163A3£úLeft Shift0x2A
164A4¤ñRight Shift0x36
165A5¥ÑPrint Screenn/a
166A6¦ªTa b0x0F
167A7§ºShift Tab0x8F
168A8¨¿Enter0x1C
169A9©⌐Esc0x01
170AAª¬Alt Make0x36
171AB«½Alt Break0xB6
172AC¬¼Control Make0x1D
173AD¡Control Break0x9D
174AE®«Alt Sequence with 1 Character0x36
Printable Characters (Continued)
DECHEXCharacterDECHEXCharacterDECHEXCharacter  
						

							A - 6
175AF¯»Ctrl Sequence with 1 Character0x1D
176B0°░
177B1±▒
178B2²▓
179B3³│
180B4´┤
181B5µ╡
182B6¶╢
183B7·╖
184B8¸╕
185B9¹╣
186BAº║
187BB»╗
188BC¼╝
189BD½╜
190BE¾╛
191BF¿┐
192C0À└
193C1Á┴
194C2Â┬
195C3Ã├
196C4Ä─
197C5Åí
198C6Æ╞
199C7Ç╟
200C8È╚
201C9É╔
202CAÊ╩
203CBË╦
204CCÌ╠
205CDÍ═
206CEÎ╬
207CFÏ╧
208D0Ð╨
209D1Ñ╤
210D2Ò╥
211D3Ó╙
212D4Ô╘
213D5Õ╒
214D6Ö╓
215D7×╫
216D8Ø╪
217D9Ù┘
218DAÚ┌
219DBÛ█
220DCÜ▄
221DDÝ▌
222DEÞ▐
223DFß▀
224E0àα
225E1áß
226E2âΓ
Extended ASCII Characters (Continued)
DECHEXCP 1252ASCIIAlternate ExtendedPS2 Scan Code