Hitachi Sj7002 Owners Manual

Parameter Settings for Keypad Entry
Appendix C
C–14
Motor Constants 
Functions
“H” Group ParametersDefault Setting
User 
Setting
Func.  CodeNameFEF2, FE2  (Europe)FU2, FU2 (U.S.A.)FF2, F2 (Japan)
H001 Auto-tuning setting 00 00 00
H002 Motor data selection, 1st motor 00 00 00
H202 Motor data selection, 2nd motor 00 00 00
H003 Motor capacity, 1st motor Factory set
H203 Motor capacity, 2nd setting Factory set
H004 Motor poles setting, 1st motor 44 4
H204 Motor poles setting, 2nd motor 44 4
H005 Motor speed...

SJ7002 Inverter
Appendix C
C–15
H051 PI integral gain for 1st motor100.0 100.0 100.0
H251 PI integral gain for 2nd motor 100.0 100.0 100.0
H052 P proportional gain setting for 1st motor 1.00 1.00 1.00
H252 P proportional gain setting for 2nd motor 1.00 1.00 1.00
H060 Zero LV limit for 1st motor 100. 100. 100.
H260 Zero LV limit for 2nd motor 100. 100. 100.
H061 Zero LV starting boost current for 1st motor 50. 50. 50.
H261 Zero LV starting boost current for 2nd motor 50. 50. 50.
H070 Terminal selection PI...

Parameter Settings for Keypad Entry
Appendix C
C–16
Expansion Card 
Functions
“P” Group ParametersDefault Setting
User 
Setting
Func.  CodeNameFEF2, FE2  (Europe)FU2, FU2 (U.S.A.)FF2, F2 (Japan)
P001 Operation mode on expansion card 1 error 00 00 00
P002 Operation mode on expansion card 2 error 00 00 00
P011 Encoder pulse-per-revolution (PPR) setting 1024 1024 1024
P012 Control pulse setting 00 00 00
P013 Pulse line mode setting 00 00 00
P014 Home search stop position setting 0. 0. 0.
P015 Home search...

SJ7002 Inverter
Appendix C
C–17
P045 Inverter action on DeviceNet comm error21 21 21
P046 DeviceNet polled I/O:  Output instance number 71 71 71
P047 DeviceNet polled I/O:  Input instance number 01 01 01
P048 Inverter action on  DeviceNet idle mode 000
P049 Motor poles setting for RPM 01 01 01
P055 Pulse train frequency span 25.0 25.0 25.0
P056 Pulse train frequency time constant 0.10 0.10 0.10
P057 Pulse train frequency bias 0. 0. 0.
P058 Pulse train frequency limit 100. 100. 100.
P060 Multi-stage...

Parameter Settings for Keypad Entry
Appendix C
C–18
P112 Easy sequence parameter (U12)0. 0. 0.
P113 Easy sequence parameter (U13) 0. 0. 0.
P114 Easy sequence parameter (U14) 0. 0. 0.
P115 Easy sequence parameter (U15) 0. 0. 0.
P116 Easy sequence parameter (U16) 0. 0. 0.
P117 Easy sequence parameter (U17) 0. 0. 0.
P118 Easy sequence parameter (U18) 0. 0. 0.
P119 Easy sequence parameter (U19) 0. 0. 0.
P120 Easy sequence parameter (U20) 0. 0. 0.
P121 Easy sequence parameter (U21) 0. 0. 0.
P122 Easy sequence...

SJ7002 Inverter
Appendix C
C–19
User-selectable 
Menu Functions
“P” Group ParametersDefault Setting
User 
Setting
Func.  CodeNameFEF2, FE2  (Europe)FU2, FU2 (U.S.A.)FF2, F2 (Japan)
U001
User-selected function.. . “no” = disabled, 
or use any of the functions D001 to P049 no no no
U002 no no no
U003 no no no
U004 no no no
U005 no no no
U006 no no no
U007 no no no
U008 no no no
U009 no no no
U010 no no no
U011 no no no
U012 no no no

Phone: 800.894.0412   

Phone: 800.894.0412   

CE–EMC 
Installation 
Guidelines
In This Appendix....page
— CE–EMC Installation Guidelines.......................................................   2
— Precautions for EMC, Models SJ700-004 to -1500..........................   4
— Precautions for EMC, Models SJ700-1850 to -4000........................   5
D

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]  

CE–EMC Installation Guidelines
Appendix D
D–2
CE–EMC Installation Guidelines
You are required to satisfy the EMC directive (89/336/EEC) when using an SJ7002 inverter in 
an EU country. To satisfy the EMC directive and  to comply with standard, follow the guidelines 
in this section.
1. As user you must ensure that the HF (hig h frequency) impedance between adjustable 
frequency inverter, filter, and ground is as small as possible.
 Ensure that the connections are metallic and have the largest possible...

SJ7002 Inverter
Appendix D
D–3
6.Follow safety measures in  the filter installation.
 Ensure that the protective earth terminal (PE)  of the filter is properly connected to the PE 
terminal of the adjustable frequency inverter. An  HF ground connection via metal 
contact between the housings of the filter and  the adjustable frequency inverter, or solely 
via cable shield,  is not permitted as a prot ective conductor connection . The filter must be 
solidly and permanently connect ed with the ground...