Hitachi Projector CP-WX8650 User Manual

81
SCREEN menu
SCREEN menu
From the SCREEN menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to 
execute the item. Then perform it according to the 
following table.
ItemDescription
LANGUAGE Using the ▲/▼/◄/► buttons switches the OSD (On Screen 
Display) language.
ENGLISH  ó FRANÇAIS 
ó DEUTSCH 
ó  ESPAÑOL
       
   (shown in the LANGUAGE dialog)   
Press the 
ENTER or INPUT  button to save the language...

82
SCREEN menu
ItemDescription
AUTO BLANK Using the ▲/▼ buttons switches the mode for the AUTO BLANK 
screen.
BLUE  ó WHITE 
ó BLACK
       
• To avoid remaining as an afterimage, displayed image will change
to the designated blank color screen by AUTO BLANK after several
minutes at the following conditions.
- When MyScreen or ORIGINAL is displayed as BLANK screen.
- When start-up screen is displayed.
START UP
Using the ▲/▼ buttons switches the mode for the start-up screen.
The start-up screen is a...

83
SCREEN menu
ItemDescription
MyScreen This item allows you to capture an image for use as a MyScreen 
image which can be used as the BLANK screen and START UP 
screen. Display the image you want to capture before executing the 
following procedure.
(1)  
Selecting this item displays a dialog 
titled “MyScreen”. It will ask you if 
you start capturing an image from 
the current screen. Please wait for the target image to be displayed, and press 
the  ENTER  or INPUT  button when the image is displayed....

84
SCREEN menu
ItemDescription
MyScreen Lock Using the ▲/▼ buttons turns on/off the MyScreen lock function.
ON  ó OFF
When the ON is selected, the item MyScreen is locked. Use this 
function for protecting the current MyScreen.
• This function cannot be selected when the ON is selected to the 
MyScreen PASSWORD item in SECURITY menu (
 102
).
SOURCE NAME Each input port for this projector can have a name applied to it.
(1)  
Use the ▲/▼ buttons on the SCREEN menu to select SOURCE 
NAME and press the ►...

85
SCREEN menu
ItemDescription
SOURCE NAME (continued )(6) 
 
The current name will be displayed on 
the first line. Use the ▲/▼/◄/► buttons 
and the  ENTER or INPUT  button to 
select and enter characters. To erase 1 
character at one time, press the  RESET 
button or press the ◄ and  INPUT button 
at the same time. Also if you move the 
cursor to DELETE or CLEAR ALL on 
screen and press the  ENTER or INPUT  
button, 1 character or all characters will 
be erased. The name can be a maximum 
of 16...

86
SCREEN menu
ItemDescription
C.C.
(Closed Caption) The C.C. is the function that displays a 
transcript or dialog of the audio portion of 
a video, files or other presentation or other 
relevant sounds. It is required to have NTSC 
format video or 480i@60 format component 
video source supporting C.C. feature to 
utilize this function.
It may not work properly, depending on equipment or signal source. 
In this case, please turn off the Closed Caption.
DISPLAY
Select Closed Caption DISPLAY setting from...

87
OPTION menu
OPTION menu
From the OPTION menu, items shown in the table 
below can be performed. 
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to 
execute the item. Then perform it according to the 
following table.
ItemDescription
SOURCE SKIP The ports can be set to be ignored in searching by the AUTO 
SEARCH function 
(
below
) or in selecting by buttons on the control 
panel. 
(1)   Choose a picture input port using the ▲/▼ buttons.
(2)   Using the...

88
OPTION menu
ItemDescription
DIRECT POWER  ON Using the ▲/▼ buttons turns on/off the DIRECT POWER ON 
function.
ON  ó OFF
When set to the ON, the lamp in projector will be automatically turned 
on without the usual procedure (
 35
), only when the projector is 
supplied with the power after the power was cut while the lamp was on.
• This function does not work as long as the power has been 
supplied to the projector while the lamp is off.
• After turning the lamp on by the DIRECT POWER ON function,...

89
OPTION menu
ItemDescription
MY BUTTON
This item is to assign one of the following functions to  MY BUTTON 
( 1  to  4) on the remote control (
 7
).
(1)   Use the ▲/▼ buttons on the MY BUTTON menu to select a 
button from MY BUTTON - 1 to 4 and press the ► or  ENTER 
button to display the MY BUTTON setup dialog. 
(2)   Then using the ▲/▼/◄/► buttons sets one of the following 
functions to the chosen button. Press the  ENTER or INPUT  
button to save the setting.
MY IMAGE : Displays the MY IMAGE...

90
OPTION menu
ItemDescription
MY BUTTON (continued)
ACCENTUALIZER: Turns on/off the ACCENTUALIZER dialog  ( 65
).
HDCR: Turns on/off the HDCR dialog ( 65
).
STATUS MONITOR: Turns on/off the back light of status monitor  (
 31
). This function is unavailable when SAVING is selected in 
STANDBY MODE while the projector is in the standby mode.
SCHEDULE
■ How to setup the item
1. Use the ▲/▼/◄/► cursor buttons to select or adjust.
2. Select OK to finish the settings.
(continued on next page)
■ How to...