Hitachi Projector CP-WX8650 User Manual

61
EASY MENU
ItemDescription
ECO MODE Using the ◄/► buttons turns off/on the Eco mode.
See the ECO MODE item in SETUP menu (

75
).
INSTALLATION Pressing the ► button displays the INSTALLATION dialog.
See the INSTALLATION item in SETUP menu (

77
).
RESET Performing this item resets all of the EASY MENU items except the 
FILTER TIME and LANGUAGE.
A dialog is displayed for confirmation. Selecting the OK using the ► 
button performs resetting.
FILTER TIME The usage time of the air filter is shown in the...

62
PICTURE menu
PICTURE menu
From the PICTURE menu, items shown in the table 
below can be performed. 
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to 
execute the item. Then perform it according to the 
following table.
ItemDescription
BRIGHTNESS Using the 
◄/► buttons adjusts the brightness.
Dark  ó Light
CONTRAST Using the 
◄/► buttons adjusts the contrast.
Weak  ó Strong
COLOR Using the ◄/► buttons adjusts the strength of whole color.
Weak  ó Strong
TINT...

63
PICTURE menu
ItemDescription
PICTURE  QUALITY Selecting this item displays the PICTURE 
QUALITY menu.
Select an item using the ▲/▼ buttons, 
and press the ► button or the ENTER
button on the remote control to execute 
the item.
PICTURE MODE
STANDARD   ó  NATURAL  
ó  CINEMA  
ó  DYNAMIC
                                                                              

  USER-3                                                         BOARD(BLACK)
        
...

64
PICTURE menu
ItemDescription
PICTURE  QUALITY
(continued) GAMMA (continued)
Selecting a mode whose name includes CUSTOM and then 
pressing the ► button or the 
ENTER button displays   
a dialog to aid you in adjusting the mode. This function is useful 
when you want to change the brightness of particular tones.
Choose an item using the ◄/► buttons, and adjust the level using 
the ▲/▼ buttons.
• Lines or other noise might appear on the screen when this function 
is operated, but it is not a...

65
PICTURE menu
ItemDescription
PICTURE  QUALITY
(continued) ACCENTUALIZER
ACCENTUALIZER is a function to improve the legibility.
Using the ◄/► buttons adjusts the sharpness.
Weak  ó Strong
•  There may be some noise and/or the screen may flicker for a 
moment when an adjustment is made. This is not a malfunction.
• 
This function may not work properly when IMAGE OPTIMIZER is 
enabled.
HDCR
A function to show a clear picture in a bright room.  
Using the ◄/► buttons adjusts the contrast.
• 
This function...

66
IMAGE menu
IMAGE menu
From the IMAGE menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to 
execute the item. Then perform it according to the 
following table for selected port.
ItemDescription
ASPECT Using the ▲/▼ buttons switches the mode for aspect ratio.
 
For a computer signal CP-X8800:   
  NORMAL 
ó 4:3 
ó 16:9 
ó 16:10  
        
CP-WU8600, CP-WX8650, CP-WU8700, CP-WX8750:  
  NORMAL 
ó 4:3 
ó...

67
IMAGE menu
ItemDescription
OVER SCAN Using the ◄/► buttons adjusts the over-scan ratio.
Small (It magnifies picture)  ó Large (It reduces picture)
• This item can be selected for a video signal and an SDI signal.
• 
For HDMITM, HDBaseTTM, and DisplayPort signals, this item can 
also be selected if either (1) or (2) applies.
(1)   DIGITAL FORMAT item in the INPUT menu for selected port is 
set to VIDEO.
(2)   DIGITAL
 FORMAT item in the INPUT menu for selected port is 
set to AUTO, and the projector...

68
IMAGE menu
ItemDescription
H PHASE
Using the ◄/► buttons adjusts the horizontal phase to eliminate flicker.
Right  ó Left
• This item can be selected only for a computer signal or a 
component video signal.  This function is unavailable for a signal 
from the LAN, HDMI
TM 1 / 2,  HDBaseTTM, DisplayPort , or SDI port.
H SIZE Using the ◄/► buttons adjusts the horizontal size.
Small  ó Large
• This item can be selected only for a computer signal.  This function 
is unavailable for a signal from the  LAN,...

69
INPUT menu
INPUT menu
From the INPUT menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to 
execute the item. Then perform it according to the 
following table.
ItemDescription
PROGRESSIVE Using the ▲/▼ buttons switches the progress mode.
TV  ó FILM 
ó OFF
  
• This function works only for a video signal, component video signal  
(of 480i@60 or 576i@50 or 1080i@50/60), an HDMITM signal  
(of 480i@60 or...

70
INPUT menu
ItemDescription
VIDEO FORMAT The video format for 
VIDEO port can be set.
Using the ◄/► buttons  
switches the mode for video 
format.
AUTO   ó  NTSC  
ó  PAL  
ó  SECAM
       N-PAL  ó M-PAL 
ó NTSC4.43 
• This item is performed only for a video signal from the  VIDEO port.
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well for some signals. If the 
picture becomes unstable (e.g. an irregular picture, lack of color), 
please select the mode...