Hitachi Projector CP-WX8650 User Manual

41
Operating
The ZOOM or FOCUS dialog will appear when you 
press any of the buttons from ZOOM, ZOOM - , 
ZOOM + , FOCUS +  and FOCUS - . 
1. Use the ZOOM + / - buttons on the remote 
control or  ZOOM button and ◄/► cursor buttons 
on the projector to adjust the screen size.
2. Use the  FOCUS + / - buttons to focus the picture.
Adjusting the lens 
Adjusting the zoom and focus
• The projector may ignore operation by 
other buttons while the lens is moving.NOTE
Press the  LENS SHIFT  button. The LENS SHIFT...

42
Operating
• The projector may ignore operation by buttons while moving the lens.
• You can perform the LOAD function using  LENS MEMORY button.NOTE
Adjusting the lens (continued)
This projector is equipped with memory functions for the 
lens adjustments (LENS SHIFT and LENS TYPE). 
 
Up to 3 sets of adjustments can be stored.
To utilize the lens memory feature, press the  LOAD 
or  FUNCTION  button while the LENS SHIFT dialog is 
displayed. Then the LENS MEMORY dialog will ap -
pear. The current lens...

43
Operating
1.Press AUTO button on the remote control.  
Pressing this button performs the following.
Using the automatic adjustment feature
  For a computer signal  
The vertical position, the horizontal position and the   
horizontal phase will be automatically adjusted.   
Make sure that the application window is set to its   
maximum size prior to attempting to use this feature. A dark picture may still be 
incorrectly adjusted. Use a bright picture when adjusting.
   For a video signal  
The...

44
Operating
KEYSTONE:   allows you to adjust the vertical and 
horizontal keystone.
PERFECT FIT :   
allows you to adjust each of the screen 
corners and sides to correct the 
distortion.
WARPING:   allows you to project an image on several 
types of screen.
• The menu or dialog will automatically disappear after several seconds 
of inactivity. Press the GEOMETRY button again, or point the cursor at EXIT in 
the dialog and press the ►or  ENTER button to end the operation and close the 
menu or dialog....

45
Operating
   
PERFECT FIT: 
When PERFECT FIT is pointed at, pressing the 
► or  ENTER  button displays the PERFECT FIT 
dialog. This projector is equipped with a test pattern for 
PERFECT FIT. Select PATTERN with the 
▲/▼ 
buttons, then press the 
◄/► buttons to switch on 
and off.
1.  Select SETUP with the ▲/▼ buttons and  
  press the 
► or  ENTER  button.
2.
 Select one of the corners or sides to be adjusted 
  with the ▲/▼/◄/► buttons and press the 
ENTER  or INPUT  button.
3. Adjust the selected...

46
Operating
Correcting the distortion (continued)
4. This projector is equipped with a memory feature for PERFECT FIT adjustment. Up to 3 sets of adjustments can be stored.
●   SAVE:   
To store the current PERFECT FIT adjustment, select one of the "SAVE" 
options numbered 1 to 3 (number of the memory) with the ▲/▼ buttons and 
press the ►,  ENTER or INPUT  button.  
Remember that the current data being stored of a memory will be lost by 
saving new data into the memory.
●   LOAD:   
To recall...

47
Operating
Using the EDGE BLENDING features
1. Mode (MANUAL/CAMERA)
OFF: Disables the Blending function.
MANUAL: Allows you to adjust Blending Region or Blending Level by using menu.
CAMERA:  Allows you to perform automatic adjustment by using CAMERA in  Projector Blending Tool.
• IMAGE OPTIMIZER is not selectable when Blending is set to other than OFF .
• ECO MODE is not selectable when Blending is set to other than OFF.
•  Keystone/Perfect Fit/Warping are not selectable when CAMERA is selected in...

48
Operating
(continued on next page) 
3.1 Displaying Cropping Menu
 
Select CROPPING with ▲/▼ buttons and press 
►, 
ENTER or INPUT button to display Cropping Menu.  
 
3.2 Setting Cropping  
Select MODE with ▲/▼ buttons and select ON with 
◄/► buttons. 
Input image is automatically cut out according to the 
settings of Blending Region.
3.   Cropping  
When inputting the same image to each projector, Cropping function enables 
two projectors to cut out a part of input image and display one image on a...

49
Operating
 3.3 Adjusting Cropping Area
Adjust Cropping Area when cutting out a part of input image.
Select SETUP with ▲/▼ buttons and press 
►, ENTER or INPUT button.
*  MODE is set to [OFF] temporarily and the guide of Cropping Area  is displayed.
Select [LT]/[WH] with ▲/▼ buttons and press  ENTER or INPUT button.
Move the guide display with ▲/▼/
◄/► buttons to select the region of the 
screen to be cut out.
Press ENTER or INPUT button and then press 
◄ button to select SETUP, and 
MODE switches to...

50
Operating
4.  Selecting Blending Level  
Select BLENDING LEVEL with ▲/▼ buttons.  
[1-25] can be selected with 
◄/► buttons. 
Adjust the brightness of Blending Region according to the settings.
5.   DIMMING LEVEL  
Adjusts the brightness of the projectors which are using Blending.  
Using the ◄/► buttons to adjust the dimming level.
6.   WHITE BALANCE 
Adjusts the white balance of the whole screen.
6.1.   OFFSET  
OFFSET adjustments change the color intensity on the whole tones.
6.2.   GAIN 
GAIN...