Hitachi Projector CP-WX8650 User Manual

91
OPTION menu
ItemDescription
SCHEDULE  (continued)
■ PROGRAM EDIT
The TIME and EVENT for Program 1 to 16 can be editted.
• RETURN
Select this to go back 
to the top menu of the 
SCHEDULE.
• SELECT
Select from PROGRAM-01 
 to 16 to edit. 
Each PROGRAM can be 
 setup up to 20 settings.
• COPY TO
The selected program 
(with the settings of TIME 
and EVENT) can be 
copied to other program.
• APPLY
Select this to apply and 
save all adjustments and 
settings.
(continued on next page)
Check mark 
in the box...

92
OPTION menu
ItemDescription
SCHEDULE  (continued)
■ How to edit the selected PROGRAM
1.   Select from 1 to 20 events.  
Use the ▲/▼ cursor buttons to select.  
Press ► cursor button to set the TIME and EVENT.
2. Use the ◄/► cursor   
buttons to select.
3. Use the ▲/▼ cursor   
buttons to adjust.
EVENT can be selected as listed below.
◦ POWER − ON, STANDBY
◦ INPUT SOURCE − "input source"channel
◦ MY IMAGE − IMAGE-1 to 4, IMAGE OFF
◦ MESSENGER − TEXT-1 to 12, TEXT OFF
◦   ECO MODE −   NORMAL,...

93
OPTION menu
ItemDescription
SERVICE Selecting this item displays the SERVICE 
menu.
Select an item using the ▲/▼ buttons, 
and press the ► button or the 
ENTER 
button on the remote control to execute 
the item.
ALTITUDE
Using the ▲/▼ buttons switches the rotation speed of the cooling 
fans. It is recommended to leave it at AUTO usually.
HIGH-2  ó HIGH-1 
ó NORMAL 
ó AUTO 
AUTO:    The projector changes the rotation speed automatically to 
suit the altitude and other environmental factors.  
Choose an...

94
OPTION menu
ItemDescription
SERVICE
(continued) LENS TYPE
(1) 
 Select the lens type currently used using the ▲/▼ buttons and 
press the ► or  ENTER button. If AUTO is selected, the projector 
determines the lens type automatically. 
(2)   A message dialog is displayed for confirmation. Press the ► or 
ENTER  button to save the lens type.
• This setting has an influence on the keystone distortion etc.
• The lens type determined by the projector will be displayed on the 
right of "AUTO".
• If...

95
OPTION menu
ItemDescription
SERVICE
(continued) KEY LOCK
(1)   Use the ▲/▼ buttons to choose the operations control.
CONTROL PANEL  ó REMOTE CONTROL
(2)   Use the ◄/► buttons to select ON or 
OFF.
ON  ó OFF
Selecting ON in Step 2 locks the buttons except  STANDBY, ON  
and  STANDBY/ON  on the operations control selected in Step 1. 
Selecting OFF releases the locked buttons on the operations control 
selected in Step 1.
• Please use this function to prevent tampering or accidental 
operation. 
•...

96
OPTION menu
ItemDescription
SERVICE
(continued)
COMMUNICATION
Selecting this item displays COMMUNICATION 
menu. 
In this menu, you can configure the serial 
communication settings of the projector using the 
CONTROL  port.
• Select an item using the cursor buttons ▲/▼. 
Then pressing the ► button opens the submenu 
for the setting item you selected. Or, pressing 
the ◄ button instead of the ► button makes the 
menu back to the previous one without changing 
the setup. Each submenu can be operated as...

97
OPTION menu
ItemDescription
SERVICE
(continued)
COMMUNICATION (continued)
SERIAL SETTINGS
Select the serial communication condition for the 
CONTROL  port.
BAUD RATE 4800bps  ó 9600bps 
ó 19200bps 
ó 38400bps
      
  PARITY
NONE  ó ODD 
ó EVEN
    
• The BAUD RATE is fixed to 19200bps and PARITY 
is fixed NONE when the COMMUNICATION TYPE 
is set to OFF
 ( 96
).
TRANSMISSION METHOD
Select the transmission method for communication by 
the NETWORK BRIDGE from the  CONTROL port.
HALF-DUPLEX 
ó...

98
OPTION menu
ItemDescription
SERVICE
(continued)
COMMUNICATION (continued)
RESPONSE LIMIT TIME
Select the time period to wait for receiving 
response data from other device communicating by 
the NETWORK BRIDGE and the HALF-DUPLEX 
through the  CONTROL port.
OFF  ó 1s 
ó 2s 
ó 3s
    
OFF : Select this mode if it is not required to check 
the responses from the device that the projector 
sends data to. In this mode, the projector can 
send out data from the computer continuously.
1s /2s /3s: Select the...

99
OPTION menu
ItemDescription
SERVICE
(continued) INFORMATION
Selecting this item displays a dialog titled “INPUT_INFORMATION”. 
It shows the information about the current input.
• The “FRAME LOCK” message on the dialog means the frame lock 
function is working. 
• This item can't be selected for no signal and sync out.
• When the MY TEXT DISPLAY is set to ON, the MY TEXT is 
displayed together with the input information in the 
 
INPUT_INFORMATION box (
 106
).
FACTORY RESET
Selecting OK using the...

100
NETWORK menu
See the Network Guide for details of NETWORK operation.
Remember that incorrect network settings on this projector may cause trouble on 
the network. Be sure to consult with your network administrator before connecting 
to an existing access point on your network.
NETWORK menu