Hitachi Projector CP-WX8650 User Manual

							91
OPTION menu
ItemDescription
SCHEDULE  (continued)
■ PROGRAM EDIT
The TIME and EVENT for Program 1 to 16 can be editted.
• RETURN
Select this to go back 
to the top menu of the 
SCHEDULE.
• SELECT
Select from PROGRAM-01 
 to 16 to edit. 
Each PROGRAM can be 
 setup up to 20 settings.
• COPY TO
The selected program 
(with the settings of TIME 
and EVENT) can be 
copied to other program.
• APPLY
Select this to apply and 
save all adjustments and 
settings.
(continued on next page)
Check mark 
in the box
Date and first 
setup info could 
be seen with the 
check mark.
2/2 page (Set specific date from 1 to 10.) 
						

							92
OPTION menu
ItemDescription
SCHEDULE  (continued)
■ How to edit the selected PROGRAM
1.   Select from 1 to 20 events.  
Use the ▲/▼ cursor buttons to select.  
Press ► cursor button to set the TIME and EVENT.
2. Use the ◄/► cursor   
buttons to select.
3. Use the ▲/▼ cursor   
buttons to adjust.
EVENT can be selected as listed below.
◦ POWER − ON, STANDBY
◦ INPUT SOURCE − "input source"channel
◦ MY IMAGE − IMAGE-1 to 4, IMAGE OFF
◦ MESSENGER − TEXT-1 to 12, TEXT OFF
◦   ECO MODE −   NORMAL, ECO
◦ BLANK − ON, OFF
4. Press ► cursor button to finish the settings. 
5.   Select APPLY to save the settings.
(continued on next page)
 Please refer to the actual on-screen display(OSD) for 
appropriate operation.NOTE 
						

							93
OPTION menu
ItemDescription
SERVICE Selecting this item displays the SERVICE 
menu.
Select an item using the ▲/▼ buttons, 
and press the ► button or the 
ENTER 
button on the remote control to execute 
the item.
ALTITUDE
Using the ▲/▼ buttons switches the rotation speed of the cooling 
fans. It is recommended to leave it at AUTO usually.
HIGH-2  ó HIGH-1 
ó NORMAL 
ó AUTO 
AUTO:    The projector changes the rotation speed automatically to 
suit the altitude and other environmental factors.  
Choose an option below when there is a trouble with the 
AUTO mode.
NORMAL:    This mode can be used below 1600m (5250ft.).
HIGH-1:   
This mode can be used between 1600 to 2300m (5250 to 
7550ft.).
HIGH-2:   
This mode can be used above 2300m (7550ft.).
AUTO ADJUST
Using the ▲/▼ buttons to select one of the mode. When the 
DISABLE is selected, the automatic adjustment feature is disabled.
FINE  ó FAST 
ó DISABLE
   
FINE: Finer tuning including H.SIZE adjustment.
FAST :  Faster tuning, setting H.SIZE to prearranged data for the 
input signal.
• Depending on conditions, such as input image, signal cable to 
the projector, environment around the projector, etc., the automatic 
adjustment may not work correctly.  In such a case, please 
choose DISABLE to disable the automatic adjustment, and make 
adjustment manually.
(continued on next page) 
						

							94
OPTION menu
ItemDescription
SERVICE
(continued) LENS TYPE
(1) 
 Select the lens type currently used using the ▲/▼ buttons and 
press the ► or  ENTER button. If AUTO is selected, the projector 
determines the lens type automatically. 
(2)   A message dialog is displayed for confirmation. Press the ► or 
ENTER  button to save the lens type.
• This setting has an influence on the keystone distortion etc.
• The lens type determined by the projector will be displayed on the 
right of "AUTO".
• If the projector cannot determine the lens type automatically when 
this item is set to AUTO, "UNKNOWN LENS" is displayed on the 
right of "AUTO". 
• About the optional lens, ask your dealer.
LENS LOCK
Using the ▲/▼ buttons turns on/off the lens lock feature. When ON 
is selected, the buttons ( ZOOM, ZOOM +  / -,  FOCUS +  / -,  LENS 
SHIFT , LENS MEMORY ) are locked.
ON  ó OFF
(continued on next page) 
						

							95
OPTION menu
ItemDescription
SERVICE
(continued) KEY LOCK
(1)   Use the ▲/▼ buttons to choose the operations control.
CONTROL PANEL  ó REMOTE CONTROL
(2)   Use the ◄/► buttons to select ON or 
OFF.
ON  ó OFF
Selecting ON in Step 2 locks the buttons except  STANDBY, ON  
and  STANDBY/ON  on the operations control selected in Step 1. 
Selecting OFF releases the locked buttons on the operations control 
selected in Step 1.
• Please use this function to prevent tampering or accidental 
operation. 
• It's not possible to disable both options at the same time.
REMOTE RECEIV.
(1)   Select a remote sensor using the ▲/▼ button.
FRONT  ó REAR 
ó HDBaseT
 
(2)   Switch it using the ◄/► button.
ON  ó OFF
• When one sensor is turned off, the other cannot be turned off too. 
REMOTE FREQ.
(1)   Use the ▲/▼ button to change the projector's remote sensor 
frequency setting  (
4
,  29 ).
1:NORMAL  ó 2:HIGH
(2)   Use the ◄/► button to change the 
projector's remote sensor on or off.
ON  ó OFF
If the remote control does not function correctly, disable either of 
them.
• It's not possible to disable both options at the same time.
REMOTE ID
Use the ▲/▼ buttons on the REMOTE ID menu to select ID and 
press the ► button. ALL  ó 1 
ó 2 
ó 3 
ó 4 
The projector is controlled by the remote control whose  ID button 
is set the same number as this number. When the ALL is selected, 
the projector is controlled by a remote control irrespective of the ID 
setting.
(continued on next page) 
						

							96
OPTION menu
ItemDescription
SERVICE
(continued)
COMMUNICATION
Selecting this item displays COMMUNICATION 
menu. 
In this menu, you can configure the serial 
communication settings of the projector using the 
CONTROL  port.
• Select an item using the cursor buttons ▲/▼. 
Then pressing the ► button opens the submenu 
for the setting item you selected. Or, pressing 
the ◄ button instead of the ► button makes the 
menu back to the previous one without changing 
the setup. Each submenu can be operated as 
described above.
• When COMMUNICATION TYPE (
 below
) is 
set to OFF, the other items except STACK in 
COMMUNICATION menu are invalid.
• For the function of serial communication, refer to  
the Network Guide .
COMMUNICATION TYPE
Select the communication type for transmission via 
the CONTROL  port.
NETWORK BRIDGE (WIRELESS)  
   
NETWORK BRIDGE (WIRED)  
   
  OFF
NETWORK BRIDGE: Select this type, if it is  required to control an external device as a 
network terminal, via this projector from the 
computer. Select WIRELESS or WIRED as your 
network connection mode.
The  CONTROL  port does not accept RS-232C   
commands (
 7. Network Bridge Function
 in 
the  Network Guide ).
OFF : Select this mode to receive RS-232C 
commands using the  CONTROL port. 
• OFF is selected as the default setting. 
• When you select the NETWORK BRIDGE, check 
the item, TRANSMISSION METHOD  (
97
).
(continued on next page) 
						

							97
OPTION menu
ItemDescription
SERVICE
(continued)
COMMUNICATION (continued)
SERIAL SETTINGS
Select the serial communication condition for the 
CONTROL  port.
BAUD RATE 4800bps  ó 9600bps 
ó 19200bps 
ó 38400bps
      
  PARITY
NONE  ó ODD 
ó EVEN
    
• The BAUD RATE is fixed to 19200bps and PARITY 
is fixed NONE when the COMMUNICATION TYPE 
is set to OFF
 ( 96
).
TRANSMISSION METHOD
Select the transmission method for communication by 
the NETWORK BRIDGE from the  CONTROL port.
HALF-DUPLEX 
ó FULL-DUPLEX
HALF-DUPLEX : This method lets the projector 
make two way communication, but only one 
direction, either transmitting or receiving data, is 
allowed at a time.
FULL-DUPLEX : This method lets the projector 
make two way communication, transmitting and 
receiving data at the same time.
• HALF-DUPLEX is selected as the default setting.
• If you select HALF-DUPLEX, check the setting of 
the item RESPONSE LIMIT TIME  (
98
).
(continued on next page) 
						

							98
OPTION menu
ItemDescription
SERVICE
(continued)
COMMUNICATION (continued)
RESPONSE LIMIT TIME
Select the time period to wait for receiving 
response data from other device communicating by 
the NETWORK BRIDGE and the HALF-DUPLEX 
through the  CONTROL port.
OFF  ó 1s 
ó 2s 
ó 3s
    
OFF : Select this mode if it is not required to check 
the responses from the device that the projector 
sends data to. In this mode, the projector can 
send out data from the computer continuously.
1s /2s /3s: Select the time period to keep the  projector waiting for response from the device 
that the projector sends data to. While waiting the 
response, the projector does not send out any 
data from the  CONTROL port.
• This menu is available only when the NETWORK 
BRIDGE is selected for the COMMUNICATION 
TYPE and the HALF-DUPLEX is selected for the 
TRANSMISSION METHOD  (
97
).
• OFF is selected as the default setting.
STACK
Selecting this item displays the STACK menu. 
For more information, please see  Instant Stack 
Guide . 
• When STACK MODE is set to MAIN or SUB, 
the other items in COMMUNICATION menu are 
invalid.
(continued on next page) 
						

							99
OPTION menu
ItemDescription
SERVICE
(continued) INFORMATION
Selecting this item displays a dialog titled “INPUT_INFORMATION”. 
It shows the information about the current input.
• The “FRAME LOCK” message on the dialog means the frame lock 
function is working. 
• This item can't be selected for no signal and sync out.
• When the MY TEXT DISPLAY is set to ON, the MY TEXT is 
displayed together with the input information in the 
 
INPUT_INFORMATION box (
 106
).
FACTORY RESET
Selecting OK using the ► button performs this function. By this 
function, all the items in all of menus will collectively return to the 
initial setting. Note that the items LAMP TIME, FILTER TIME, 
LANGUAGE,  AUTO BLANK,  FILTER MESSAGE, STANDBY MODE, 
COMMUNICATION, NETWORK and SECURITY settings are not 
reset.
CANCEL  ð OK 
						

							100
NETWORK menu
See the Network Guide for details of NETWORK operation.
Remember that incorrect network settings on this projector may cause trouble on 
the network. Be sure to consult with your network administrator before connecting 
to an existing access point on your network.
NETWORK menu