Hitachi Projector CP-WX8650 User Manual
Have a look at the manual Hitachi Projector CP-WX8650 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 913 Hitachi manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
11 Setting up Arrangement (continued) WARNING (continued on next page)►Install the projector where you can access the power outlet easily. If an abnormality should occur, unplug the projector urgently. Otherwise it could cause a fire or electric shock. ►Do not subject the projector to unstable conditions. If the projector falls or topples over, it could result in injury or damage to the projector and the surrounding things. Using a damaged projector could result in a fire and an electric shock. • Do not place the projector in unstable places, such as an inclined surface, places subject to vibration, on top of a wobbly table or cart, or a surface that is smaller than the projector. • Do not put the projector on its side, front or rear position. • Do not attach nor place anything on the projector unless otherwise specified in the manual. • Do not use any mounting accessories except the accessories specified by the manufacturer. Read and keep the manuals of the accessories used. • For special installation such as ceiling mounting, be sure to consult your dealer beforehand. • It is possible to install the projector for any direction with specified mounting accessories. Consult with your dealer about such a special installation. • Remove all the attachments including the power cord and cables, from the projector when carrying the projector. ►Do not install the pro jector near thermally conductive or flammable things. Such things when heated by the projector could result in a fire and burns. • Do not place the projector on a metal stand. ►Do not place the projector where any oils, such as cooking or machine oil, are used. Oil may harm the product, resulting in malfunction, or falling from the mounted position. ►Do not place the projector in a place where it may get wet. Getting the projector wet or inserting liquid into the projector could cause a fire and an electric shock, and damage the projector. • Do not place the projector near water, such as in a bathroom, kitchen, or poolside. • Do not place the projector outdoors or by the window. • Do not place anything containing liquid near the projector. ►Do not block the intake vents and exhaust vents of the projector. If the intake vents and exhaust vents of the projector are blocked, the accumulated inside heat may cause fire.
12 Setting up Arrangement (continued) ►Place the projector in a cool place with sufficient ventilation. The projector may shutdown automatically or may malfunction if its internal temperature is too high. Using a damaged projector could result in a fire and an electric shock. • Do not place the projector in direct sunlight or near hot objects such as heaters. • Do not place the projector where the air from an air conditioner or similar unit will blow on it directly. • Do not place the projector on carpet, cushions or bedding. • Do not stop up, block nor cover the projector's vent holes. Do not place anything around the projector that could be sucked in or stuck to the projector's intake vents. • Do not place the projector at places that are exposed to magnetic fields, doing so can cause the cooling fans inside the projector to malfunction. ►Avoid placing the projector in smoky, humid or dusty place. Placing the projector in such places could cause a fire, an electric shock and malfunction of the projector. • Do not place the projector near humidifiers. Especially for an ultrasonic humidifier, chlorine and minerals contained in tap water are atomized and could be deposited in the projector causing image degradation or other problems. • Do not place the projector in a smoking area, kitchen, passageway or by the window. • Position the projector to prevent light from directly hitting the projector's remote sensor. • Do not place the product in a place where radio interference may be caused. • Set the ALTITUDE of the SERVICE item in the OPTION menu correctly. It is recommended to leave it at AUTO usually ( 93). If the projector is used with a wrong setting, it may cause damage to the projector itself or the parts inside. • Keep heat-sensitive things away from the projector. Otherwise, they may be damaged by the heat from the projector.CAUTION NOTICE • When the temperature inside the projector rises high, it may cause the high rotation of the fan for cooling temporarily.NOTE
13 Setting up Connecting with your devices Before connecting the projector to a device, consult the manual of the device to confirm that the device is suitable for connecting with this projector and prepare the required accessories, such as a cable in accord with the signal of the device. Consult your dealer when the required accessory did not come with the product or the accessory is damaged. After making sure that the projector and the devices are turned off, perform the connection, according to the following instructions. Refer to the figures in subsequent pages. Before connecting the projector to a network system, be sure to read Network Guide too. ►Use only the appropriate accessories. Otherwise it could cause a fire or damage the projector and devices. • Use only the accessories specified or recommended by the projector ’s manufacturer. It may be regulated under some standard. • Neither disassemble nor modify the projector and the accessories. • Do not use the damaged accessory. Be careful not to damage the accessories. Route a cable so that it is neither stepped on nor pinched out.WARNING ►For a cable with a core at only one end, connect the end with the core to the projector. That may be required by EMI regulations. CAUTION • Plug-and-Play is a system composed of a computer, its operating system and peripheral equipment (i.e. display devices). This projector is VESA DDC 2B compatible. Plug-and-Play can be used by connecting this projector to a computer that is VESA DDC (display data channel) compatible. - Take advantage of this feature by connecting a computer cable to the COMPUTER IN port (DDC 2B compatible). Plug-and-Play may not work properly if any other type of connection is attempted. - Please use the standard drivers in your computer as this projector is a Plug- and-Play monitor. • Do not turn on or off the projector while connected to a device in operation, unless that is directed in the manual of the device. Otherwise it may cause malfunction in the device or projector. • The function of some input ports can be selected according to your usage requirements. Check the reference page indicated beside each port in the following illustration. • Be careful not to mistakenly connect a connector to a wrong port. Otherwise it may cause malfunction in the device or projector. - When connecting a connector to a port, make sure that the shape of the connector fits the port. - Tighten the screws to connect a connector equipped with screws to a port. - Use the cables with straight plugs, not L-shaped ones, as the input ports of the projector are recessed. About Plug-and-Play capability NOTE (continued on next page)
14 Setting up Connecting with your devices (continued) HDBaseTTMDisplayPort ComputerCP-WU8600/CP-WX8650/CP-WX8750/CP-X8800 CP-WU8700 HDBaseTTMDisplayPort Computer (continued on next page)
15 • Before connecting the projector to a computer, consult the computer’s manual and check the compatibility of the signal level, the synchronization methods and the display resolution output to the projector. - Some signal may need an adapter to input this projector. - Some computers have multiple screen display modes that may include some signals which are not supported by this projector. - Although the projector can display signals with a resolution up to UXGA (1600x1200) or up to W-UXGA (1920x1200) , the signal will be converted to the projector’s panel resolution before being displayed. The best display performance will be achieved if the resolutions of the input signal and the projector panel are identical. • If you connect this projector and a notebook computer, you need output the display to an external monitor, or output simultaneously to the internal display and an external monitor. Consult the computer's manual for the setting. • Depending on the input signal, the automatic adjustment function of this projector may take some time and not function correctly. - Note that a composite sync signal or sync-on-green signal may confuse the automatic adjustment function of this projector ( 71). - If the automatic adjustment function does not work correctly, you may not see the dialog to set the display resolution. In such a case, use an external display device. You may be able to see the dialog and set an appropriate display resolution. • Use DisplayPort cables comforming to the DisplayPort standard. • Use of DisplayPort cables not conforming to the DisplayPort standard may cause abnormal operations such as images with interruption or not displayed. • When the projector is connected to the output of the computer with an early type of chipset or graphics card that supports the DisplayPort, the projector and/or computer may not operate normally. In that case, turn off the projector and/or computer, then turn on again. • When connecting the output of the DisplayPort to the input of the projector, use of the computer with the newest chipset or graphics card is recommended. • Commercially available DisplayPort cables may have lock system. When Unplugging the cable, push the button on the connector of the cable. • Some computers may take a long time to display the image. • Power supply is available to the connected device with the input port of DisplayPort. However, it is not available to the computer. • When the signal from the device with a signal converting adapter is connected to the input port of DisplayPort, the image may not be displayed. • Use a commercially available converter when connecting the output port of HDMI of the computer with the input port of DisplayPort of the projector . NOTE (continued on next page) Setting up Connecting with your devices (continued)
16 Setting up Connecting with your devices (continued) (continued on next page) Computer Access point USB wireless adapter (optional) External device CP-WU8600/CP-WX8650/CP-WX8750/CP-X8800 CP-WU8700 Computer Access point USB wireless adapter (optional) External device
17 Setting up Connecting with your devices (continued) ► Before connecting the projector to a network system be sure to obtain the consent of the administrator of the network. ► Do not connect the LAN port to any network that might have the excessive voltage. ►The designated USB wireless adapter that is sold as an option is required to use the wireless network function of this projector. Before connecting the USB wireless adapter, turn off the power of the projector and disconnect the power cord. Do not use any extension cable or device when connecting the adapter to the projector. ►To connect both the LAN cable and USB wireless adapter to the projector, use a LAN cable that is flat on the side where the plug’s wire is visible. Otherwise, both of them cannot be connected correctly, or the wire may break (malfunction). CAUTION ►Heat may build up in the USB wireless adapter, to avoid possible burns disconnect the projector power cord for 10 minutes before touching the adapter. ► When using the USB wireless adapter, use the supplied adapter cover or terminal cover ( 24, 25). WARNING (continued on next page)
18 Setting up Connecting with your devices (continued) VCR/DVD/ Blu-ray DiscTM player CP-WU8600/CP-WX8650/CP-WX8750/CP-X8800 CP-WU8700 VCR/DVD/ Blu-ray DiscTM player (continued on next page)
19 (continued on next page) • HDBaseT is a technology to transmit image, sound, ethernet or serial control signal via LAN cable. • Please go to the following URL regarding the device of other company that supports HDBaseT and has been confirmed compatible with this projector.http://www.hitachi.co.jp/proj/ LAN or HDBaseT input port can be selected as ethernet signal input by switching in the menu. • Use LAN cables of up to 100m long. Exceeding this length, the image and sounds will be deteriorated, and even experience malfunction on LAN transmission. About HDBaseT™ connection Setting up Connecting with your devices (continued) • The HDMI ports of this model are compatible with HDCP (High-band- width Digital Content Protection) and therefore capable of displaying video signals from HDCP compatible DVD players or the like. - The HDMI ports support the following signals: For Video signals, refer to User’s Manual (detailed) Technical. Audio signal : Format Linear PCM Sampling frequency 48kHz / 44.1kHz / 32kHz - This projector can be connected with another equipment that has HDMITM connector, but with some equipment the projector may not work properly, something like no video. - Qualified cable is required for HDBaseT connection. - Be sure to use an HDMI TM cable that has the HDMITM logo. - Use a Category 2-certified HDMITM cable to input 1080p@50/60 signal to the projector. - When the projector is connected with a device having DVI connector , use a DVI to HDMI TM cable to connect with the HDMITM input. • The HDMITM cables might come off easily due to the lack of a mechanical lock on the cables and connectors. It is recommended to fasten the HDMI cables by using the HDMI cable holder and the Cable tie to prevent them from coming of f ( 23). NOTE
20 Setting up Connecting with your devices (continued) Speakers (with an amplifi er) (Wired) Remote control Monitor Another projector CP-WU8600/CP-WX8650/CP-WX8750/CP-X8800 CP-WU8700 Speakers (with an amplifi er) (Wired) Remote control Monitor Another projector (continued on next page)